Search results for query: *

05 ram 5.7 cranks over ok. Had her check fuel pump fuse and relay in fuse box under hood both checked out ok, don't know where to have her check next. Truck has 115,000 miles on it. I'm guessing fuel pump but I'm 150 miles away. I just talked to her again and were trying to reset computer by...

Wanting to adjust valves on 340 with 273 rockers on hydraulic lifters. Have read on other threads to get the cam on the lowest point for selected rocker ( that part is easy enough for me ) then rotate pushrod with fingers while tightening adjuster until pushrod becomes a little stiff to...

Anyone have experience running these shims? Ordered some and have them on the way but wonder if there is any nightmare stories associated with them. Going into 340, stock cam, stock compression, x heads, 273 rockers with the cup and ball pushrods. Will probably never see 4000 rpm just a...

Just picked up a 340 block that I am told was bored, new cam bearings ready to go but then sat uncovered in a garage for 5 years and now has a light coat of surface rust over entire block, cylinder bores and lifter bores included. Looking for a cure.

Does anyone know where to get the lower radiator hose with the spring. Everything I find has no spring.

Just built a 360 and was trying to prime oiling System but I only get oil to rockershafts when Crank is in one spot. If I rotate the crank I lose the supply of oil to the top end. Different spots for each bank on crank location when it does feed the oil up top. Is this normal or is...