Search results for query: *

What's the easiest/best place to hook up my new AFR sensor? I suppose it should be powered when the ignition is in RUN, and of course it needs a ground as well. The sensor is right next to the starter, so I'd prefer to wire it in somewhere on the firewall if that makes sense.

I pulled the Slant out of my '74 Dart for a rebuild a few months ago, and just today got everything ready to fire it up again. The electrical system is all stock. Last night the ignition system worked; we got spark in a spark plug grounded to the cylinder head to set the "static timing" on the...

I posted this on slantsix.org but I thought I should share it here too. There have been several threads here about the aftermarket sending units not working quite right with the factory gauge. In particular, it reads full when full, empty when empty, but at mid-ranges the aftermarket unit...

After driving my Dart for 2 years with no key issues, now sometimes my key won't go into the ignition at all. Eventually I can get it in after a lot of jiggling (insert sex joke here). It's not the key because I have two keys and it happens to both of them. Also, I never have any trouble...

My speedometer moves smoothly at speed, but doesn't go all the way to zero unless I tap on the dash. I assume the cause is friction in the needle itself, not the cable. Is it possible to lubricate the needle without ruining the gauge?

My speedometer was working perfectly, until I disconnected the cable from the instrument panel so I could take the panel out. Now that I've put everything back together, the speedo doesn't work (odometer too). I've pushed the cable all the way back in as hard as I can. There is maybe a 1/8...