Search results for query: *

I bought a '69 D100 today. The carb has been modified and rigged. I'm looking for a good core to rebuild or use for parts. It's a 1 barrel Carter auto choke carb. I'm located in Oklahoma so it'll need to be shipped.

Looking for a rally dash frame for a '71 Duster or Demon. Would also consider one from a '67 Barracuda. Looking for a frame or a complete dash with A/C bezel.

Looking for a 1971 Duster or Demon rallye dash frame. I would be interested in a complete dash for an A/C car. Shipped to Oklahoma.

Looking for a clean single ballast resistor for my 1970 dart. I am wanting to solder it across the back since I have an HEI ignition. So a nice but non functional resistor is fine. The aftermarket ones I've tried to get are solid in the back and can't be easily modified.

I moved my springs in 3 inches and removed the bracket from the cut out piece of frame rail. I put it somewhere I wouldn't lose it, well it's lost. It was spot welded to the drivers side inside of the rear frame rail. Both parking brake cables go through it. I need a non rusty bracket and maybe...

I need two of the fittings that thread into the radiator for the transmisssion cooler lines. I need 2 but will buy 4 to have spares. And I also need the fitting that threads into the top of a power steering box for the high pressure line. I sent two steering boxes to firm feel with the fittings...

Finishing up a few things on my slant to 360 swap. I need a 727, 7260 U-joint slip yoke.

I pulled the 225 slant/904 from my '70 dart and didn't keep the shift or kick down levers from it before I sold it. I'm going to be using the Lokar kick down cable setup and reusing the factory floor shifter. I need the correct levers shipped to 73169

I lost the metal push pins or buttons that hold the package tray down under the back window. Originally there were two but, I would like to get at least 4 since my speakers stick up about 1/8 inch and keep the board from sitting flush. It's on a 1970 dodge dart.

I've put bucket seats in my 70 dart and now I'm working on the console and shifter. I have everything necessary except for the lower shift linkage rod. I need the lower rod that attaches to the bellcrank and to the transmission. Also whatever washers and clips necessary to hook it up would be...

Looking for a nice set of seat tracks for my 70 dart. I have a nice set of E body tracks for trade if anyone is interested. Would be nice to find a used set instead of buying new ones for $350+.

Looking for a good usable super six set up. I would like it as complete as possible. It'll be shipped to Oklahoma city or I can pick it up if it isn't too far of a drive.

I'm wanting to add a passenger side door mirror on my 70 dart swinger. I don't need an NOS show car part. But a good driver quality. Also need whatever bracket/hardware it takes to mount it to the door. PM me pics and a price if you have one. I'm in Oklahoma City, OK