Search results for query: *

it's true... one of each color offered!

Be careful if you make your own in choosing material. Pulled door panels off a 70 Duster not long ago and the sheets were there but brittle and busted in a few spots. I talked to the owner and he had made sheets and installed them with the door panels 4 years earlier. Whatever the material...

Welcome from Western Washington State near Seattle!

So the question would be, why so few two tone painted roofs when it was clearly a factory option? I think I have an idea. Here are ads for a special package offered on 1970 Darts: So if they a "giving away" vinyl roofs as a part of a special cost package, why pay for a contrasting painted...

I guess with the demise of most of the Mopar mags and even general high performance/hot rodding magazines, "magazine cars" will be a thing of the past. It hasn't been that long ago that there were 5 or 6 Mopar specific magazines. I can't believe that some enterprising person wouldn't start one...

Very odd - wrong harness?

I'm having trouble understanding exactly what you did - the picture didn't help much...

Mr. Sinister - THANK YOU, THANK YOU, THANK YOU!!!

squarehead???

got some recently from DR Diff

There is a forum called Member's Restorations where people tend to track ongoing projects. Welcome from the opposite corner of the country!

I wish you luck! It would be cool if you tracked the hours that it takes to install the kit...

Not that I can find a good picture of...

on your console I have a suggestion that someone passed to me here on FABO - attach the console carpet to the console using wide industrial velcro. You buy it by the foot, it sticks to the back of the carpet and the console - no muss, no fuss and when you need to get to stuff below the console...

It sure would be cool to have a stock appearing interior with a glove box door that opened to revealed something akin to a SciFi movie prop... Although in these the days of sealed batteries one of the slickest MSD 6AL installs I've see was bolted with the rubber isolators from the bottom of the...

8 1/4 didn't replace the 8 3/4 in A-bodies until 1973. I also have an unmolested Swinger with a 318/904 with an 8 3/4. Bought it with 27,000 miles on the clock so it's original. I have purchased 2 1972, 6 cyl, 4-door Darts with 8 3/4s in them, just to get the rear drum to drum. I think when...

put some washers under bracket with the loop that is attached to the frame in the trunk (not the lid). The situation that you describe puts a heck of a lot of stress to the latching mechanism and will eventually ruin it.

The amp gauges were never intended to last this long. You can get a modern under dash amp gauge and if you are careful, you can hook it directly to the existing Amp gauge wires and mount it under the dash. There are a host of positive diagnostic advantages to an amp gauge and a voltmeter and...

Thanks, but no it's not - that one holds the seat bottom in place and the one I'm looking for are the ones that hold the bottom of the seat back in place.

It's funny when I look at your pictures it seems that a bunch of wires are simply unwrapped (probably in search for issues in the past). Maybe someone here has pictures of your harness all bundled up and you could just re-wrap some in the groups like the factory. Or maybe there is someone near...

Thought you might want to consider this when you get to the point of installing your control module. I Customized a later plastic A-body glove box. It provides access to the controller and relay and has more storage than the crappy box Classic sends to you:

NO! Dodge (Dart Demon) and plymouth (Duster Scamp) use different splash shields.

dome light, courtesy light/map light all come on when any door opens, and come on when you switch them on with the doors closed - dual circuit.

I really like your Dart! One of the first cars I remember riding in was a 65 Dart 270 that was our family car when I was 9-14 years old.

Somebody else look at his firewall/wiring photo. I don't see a fat red wire and a fusible link headed for his bulkhead connector - did somebody already bypass his bulkhead connector?

A couple of suggestions when you are fixing this. I believe yours is a 1966 Dart? That means the wiring is almost 60 years old. The manufacturer never thought it would still be on the road in 20 years, let alone 60. Yoru under dash pictures show a lot of repairs from over the years, But I...

I think I'll stick with a heat gun for undercoat and wire attachments on an angle grinder...

Man are you guys old (in the head)! Sounds like the old folks when I was a teenager: "DAMNED KIDS AND THEIR CRAPPY LOUD CARS AND MUSIC!" ... and that was between 1972 and 76 for me!

That was just hilarious!!!! Made my day. :rofl:

I'm trying to get a picture of the bracket on the newer seat, is it welded to the seat frame? Somehow I thought that it was loose and just clamped the seat frame with the bolt...