Search results for query: *

No kidding, from the drawing I thought that would have been straight thread, and wouldn't have thought a sender or fitting would go. Thanks buddy.

Jim, you mean like if this was Don Schumachers car Stardust? Wouldn't that be something? If no history was found, this is at least the paint scheme I would be using! One of my favorites.

Strange.

Was doing the same thing to mine a while back, finally stopped?

What I've learned about 5.9 Magnums from the two I built and one helped spec: Ported heads/cleaned chambers definitely help 3500 RPM and up, help efficiency, and reduce detonation tendencies. No need for new cams. A regrind works just fine. One cam 204/210 112°LSA 110° ICL butter...

Nice nice!!

take you upvote for the melling whitebox cam, ya filthy animal! doing good work with the kid. keep it up my man!

So, I am not quite as sad as you here may think that I am. In fact, I am quite happy that I no longer have a thorn in my side to hinder my way. I have met someone here, who is hard-working, has a good heart, has her own business, has her own money, does not want or need money from anybody. Here...

Sorry to backread about all that is going on with you Mitch.

Good morning everyone. Back to work again. Semi retirement was nice. I got lots done on the car, so that makes me happy. Have it mentioned winters are wearing on me?

Good Morning I had thought of drilling/taping, 'push' nuts/JB weld or one of the newer 3M adhesives, or a combination. Not planning on taking them off again. Just looking for ideas as I'm sure that I'm not the only one who has dealt with this situtation. In the worst case senerio, how did...

They do not require priming.

No. Nothing like that. It’s not bad really. Just want it smoother. I see a smaller cam in my future. :)

Here is a picture for you. As prices go for the HDK (That I follow and learned a lot from)versus doing a 73 K frame set up with all the goodies in my new project 73 Duster with 6.4 Gen 3 Hemi. The Parts end up just as much if not a little more than the HDK set up. I follow 72bluNblu and leaned...

Crazy, it’s the first time I’ve saw something like that happening.

thank you for your patience and not giving up on an old man... I appreciate it

good to go!

I’ve sent one to you before. On Jan 4, 2022 PM to get your email I replied with the instructions attached again to that email from Jan 4, 2022

I just checked it and I got 6 and 40, thanks for the explanation.

I has a 76 dart sport with a slant which I daily drove for a couple of years in the 80s. Then I got a wrecked L code 360 4 gear. It had buckets and a factory dual snorkel. I still have it but it is rusted all to hell. Kim

Not flat, got bumps. Just gonna order a rollmaster

That gets you the 226 number above at .050 of tappet lift. It's not the moment the tappet lifts. zero out the indicator when the lifter is on the base circle, get it to .050 lift, then look at the reading on the wheel. Should be at 6 BTDC on the way up and 40 ABDC on the way down and hit...

my apologies on how I described it in the first post. And please bear with me on my next question. When you say “6 and 40” , are you meaning the moment of lifter lift to open valve and the moment of lifter stopping or valve closed added to 180 which will equal 226 duration?

Motor's in: Pretty sure that engine bay has been empty since 1984. Also been awhile since I flew solo on an engine drop but hell yeah I still got it :D Sits higher than I thought it would even tho the mounts are all the way down in the frame so I'll be looking for a low profile air cleaner...

It`s been doing that for months on my PC :realcrazy: