Search results for query: *

Looks like B and E body 4 speeds. The 440 is a '75 model that came originally with a cast crank.

Here are additional photos of the solution I came up with for Kendog 170.

@junkyardhero is fine, I just heard from him. The fire is close but blowing the opposite direction.

Cc n flow the heads, with and w/o intake Stock cc is around 160cc fwiw, you want. I used the same pistons, don't detonate them or they'll shatter.

Burns that much at 50% load. 25gph at full.

Proper crimping is a bit of a skill and you need the correct tools. I would do some test crimps to get the hang of it. I can not stress the proper tool for the job. Typical parts store crimper does not do a proper job.

That Hippo has a purdy mouff And purdy lips

You could have paved a 6 lane highway around Pacific Palisades and it would't have made a lick of difference in those winds. Again, it roared right over the PCH like it wasn't there. Half the Cleveland is actual desert, and compared the Angeles the exposure to homes is exponentially lower...

I'm afraid we are going to get massive wildfires in a decade or so here in Western NC after the destruction that Helene caused in our forests. There are hundreds of thousands of trees down so far back in the mountains that it would be impossible to get them out. The majority of those places, you...

That fire near Pasadena that started at 18:00 yesterday is now over 10K acres :eek:

Also, correct me if I'm wrong, you show a video of the car running, but currently, it's not? And you're asking $19,500 for a non running car... right?

Does Walker or the like make head pipes for the 318 manifolds? Our Carquest is going out of business and everything is cheap, was hoping I could get a set of head pipes from them. All I've been able to find is accurate and tti. Not interested in dropping that kind of coin. I have the dual...

Like @mbaird, I too ran a 22lb McLeod lightweight steel in my W2 408 Swinger. When I had my 3.09 box in my car, it was great with 3.55 gears. With 3.23, it wasn't the best, but I now blame a lot of that on the McLeod RXT clutch, which has no modulation whatsoever, either on or off. At that...

Higher output alternator. Revised wiring to handle the load of the fans. (Each in the 10-30amp range IIRC) This is for a mustang but you get the point. Thermostat switch A place on the manifold to put the thermostat switch Relays Or some form of fan controller Again... The parts you...

Can you post some pictures of the whole interior, instead of just close ups of the door panels? Also entire trunk floor too.

That's just a big pig.

1.6 Small block roller rockers in excellent shape. All spacers and bolts included. $550 plus shipping from MD. Paypal F&F preferred.