Search results for query: *

Hi, I only have two more things to take care of, this is after I have ran the engine for a decent length of time, but will continue to do so periodically. 1> There is an oil leak coming from the rear main/pan area, not a steady drip, but after a several minutes of running will accumulate a drop...

Because he can't do it. Other than that, there is no reason to run a steel flywheel with a SLR of 10:1. If you can tune you can even have a taller SLR and use an aluminum FW. 99% of the issue is tuning. I've been running aluminum flywheels on everything I can since the mid 1980's. I would never...

3700 lbs and not much hp/tq = 30 lb flywheel I have used 30lb steel, lightweght steel and aluminum with good results in the correct applications. AL flywheel will make you miserable on the street.

Never heard of it until I checked google.................. I will check it out. My Hulu expires end of the month.

Why?

Ridgid or "rigid"?

Snow flurries starting up... Hey @Scott_ 69HemiDart. Are you going to watch Shifting Gears with the Hulu service?

yes, but how much ? there has got to be some parasitic load on there just to keep things rolling no? i guess what i am trying to say is, one of those generators charging two cars would use less fuel then two of the exact same generators charging two individual cars hypothetically i think

Good to hear. Slow and easy. No pole dancing for at least a week

Line locks are allowed in all classes to do a burnout and worked by the driver. It can not be used to launch a car with any electronic assistance, as in "delay box", which is usually also used with a trans brake.

My garage has that distinct fuel smell and to be honest , wouldn't want it any other way lol. I have an electric fuel pump so no matter how cold or how long it sits , it always fires on the first try. I posted this for the reason of either getting talked into or out of and I think all the...

Excellent info/advise! I disconnected the vac line & I was able to move the valve lever but it was tight. I dont have a vac pump to check it. I see the correct "heater hose connector valve assy" on ebay & it says in the descrip "vacuum closes non-bypass heater valve" & that makes me wonder if it...

More load on generator more diesel fuel

you know, i do see ONE flow in the logic...there are two plugs there which means you could potentially charge 2 cars in 3 hours to bring it up to 11.2 miles to the gallon of course, i dont know how that would impact load

One of the main reasons I went with EFI is to get rid of the gasoline smell. The smell wasn't when driving (I had the carb dialed in), it was after parking the car in the garage for a few days. The smell would eventually soak into the garage and the car's interior. Then I would drive it and...

I think the '74 Road Runner 318 2bbl came with dual exhaust

Find one of your friends who has a kinetic bullet puller. Or if you don’t want to save bullet worry it out with a pair of pliers, hand clamping on case ONLY. best safest way find someone with a 303 and shoot them in the dirt. The primer will have to be detonated don’t know of any safe way to...

Yes, at 9.4:1 I'd consider the light weight steel for sure. Knowing what I know now, I wouldn't buy a 30lb again. You are correct, 1st gear in an OD is 3.09, same as the old Commando boxes. When I had that trans and 3.55's, the light steel was absolutely awesome.

...I found out, that it can take the rest of the trans out with it. but I gotta tell ya, that box, by itself, was horrible with my 367 cubes and a 230* cam, never mind what it might be with 25 less cubes and a cam 3 sizes bigger. Sell it, friend, just sell it. For your application, I think I...

:lol: I think I found my way there by accident back in the 70s when I was livin' in Van Nuys and workin' on the 210 up there in Sunland.

Well, I am 100% sure that I would NOT run a lightweigt flywheel in your combo. If yur gonna run that combo on the street, Yur gonna find out a few things real quick; 1) those 3.55s are gonna suck, and 2) you'll be begging for a big fat heavy flywheel, and 3) you just cannot idle it down slow...

Thanks for the info. Most likely the drums were swapped years ago. No way to tell really. By the way, it's a front disc brake, factory A/C car. PS.... A56, research Mopar red brake drums.

I "think" that my A833 trans has a 2.66 first gear but I need to get the book out and verify that before I make a move. That would put me at (2.66 x 3.55) 9.4:1 currently If I'm reading you right, which is considerably short of the 11:1 for aluminum. Even more reason to stay with one of the...

it's right where spring/fall fling is held. it's a fairly sizeable area, but nobody lives *right there* so the reports on extent are somewhat limited.

Cheaper than a divorce... So, she needs to decide, husband plus Mopar, or box wine, cats, Netflix and a Yugo

They did not. A friend has a junk wagon but he doesn't want to part it yet, another guy is 'supposed' to buy the wagon whole.

I thought that was probly the case. I knew there was a park somewhere near there.

it's down in the basin/park area. there's some farms and the golf course and outdoor recreation over there. but yeah, it's basically in the middle of town hemmed in by the 101 & 405. if that gets out of control it's a bad situation, it's very dense down there just across the freeways. good...

So the NHL postponed the game in LA due to that fire nearby. Now NFL is showing concern for the Purple Gang and the Lamms wildcard game. Shall we send that game to Minnesota :thumbsup: ? Riiight :lol: The Faiders aren't doing anything, let's send them to Vegas. Just a crazy thought I had...