Search results for query: *

904 8 inch converter stared out as a Turbo Action just freshend by Jason at Quickdraw stalls 5800 all freshend has maybe 20 passes on it 650 plus shipping from 32168

Turbo action full manual valve body reverse pattern worked great when I took it out

4150 Holley 950 hp carb with fuel line works great little 350 plus shipping

73 340 complete motor all stock 2500 obo motor is in new symrna beach fl

904 Racr Transmission best of the best parts Aluminum front drum and hardened input shaft hardened rear out put shaft rear roller bearing support billit rear drum with big piston 4.2 lever A&A trans brake CSR shield 8 inch converter 2 to choose from 1 goes 6700 other goes 5500 trans and...

727/904 transact trans brake works great bought the transmission and the valve body was in it I don’t need it for a street car my race tans has the same valve body 450 plus shipping from 49002

I have a complete back 1/2 frame kit brand new most parts still in the wrappers going a different direction 995 don’t know how I’d ship it so needs to be picked up in Kalamazoo mi

Brand new ladder bar and frame rail kit all parts are brand new in the packaging it’s a Chassis Engineering kit 3628 sells new for over 2k asking 1000 plus shipping or pickup

70 440 hp block .040 over flat top pistons steel crank MP484 cam new no lifters 452 heads all new valves and springs set up for hydraulic cam 500 lifter less then 500 miles on the heads 1200 for everything

Wiesco 4 inch crank pistons 4.080 bore 984 pin .043 ring package gas ports with rings 375 obo

Like new 9 way billet timing gear and chain 50 plus shipping

Ed Hamburger SS aluminum oil pan and oil pump has had 1 repair but does not leak 275

Used torker 340 intake 75 plus shipping

1000 CFM demon carb and fuel line 250 plus shipping

Small block mopar Meziere water pump and lower hose fitting bought new this spring 300 plus shipping

340-416 stroker assembly new Scat 4 inch steel crank Scat H beam rods Wiesco 4.080 pistons 13.1 compression gas ports .043 ring package Fluidamberbalancer rods and pistons are used but in great shape cranks is new in the box 2000 obo

360-1 245 cc Indy heads all new valves isky springs titanium retainers set up for 245 @2 inch 214 intake valves 1.60 exhaust heads were reworked by Jerry Arnold Indy intake ported by Larry Smith Harlon Sharp 1.6 rockers 3/8 Smith Brothers pushrods ARP head studs heads do not leak still on the...

Selling my 416 X Block 245 Indy RP heads Indy intake ported by Larry Smith Harlon Sharp 1.6 rockers Smith Bro’s 3/8 pushrods lifter bores are bushed billit main caps comp cam 275-286@50 roller steel inch MP crank Scat rods arp 2000 bolts Wiesco dome pistons motor has 20 passes since freshend...

SBM powerglide transmission built by trans specialties 180 low gear trans brake its there 2500 series trans JW SFI bell housing SFI flex plate new converter from quick draw 6200 stall trans was just freshend has 6 passes on it every thing need to convert your car to a glide 2500obo

440 M1 intake powder coat high temp 250 plus shipping from 49002

I have a 340 steel crank shaft std rods and mains the cranks have been sealed up for yrs will need to be cleaned $150 273-318 steel cranks all have the bigger rear flange $100 each have been sealed up fir yrs and will need to be cleaned 2 340 cast cranks and balancer both are standard rod and...

Like new SS springs 002-003 made in Mexico have 2 inch lowering blocks u bolts and lower shock plates 3 way adjustable rear shocks 225 plus shipping

Turbo action reverse valve body works great 200 plus shipping from 49002

Turbo action reverse pattern valve body works great 275 plus shipping from 49002

Holley blue pump works great just upgraded 65 plus shipping

440 Procomp dist works great 75.00 plus shipping from 49002

New 340 oil pan center stock replacement MP oil pan 50 plus shipping from 49002

MP big block 284-484 hydraulic cam new had been sitting for yrs 175.00 plus shipping from 49002

Complete set of Race W2 rockers intake heads have 208 intake valves 160 exhaust springs are set up for a roller cam 240 on the seat strip dominater intake with a lot of work done to it the rocker arms are bushed don’t have any flow numbers the heads on the 416 I had went 10.06 @ 131.68 so they...

416 rotating assembly less the 40 passes on it scat 9000 series crank scat pro series I beam rods arp 2000 bolts weisco 4.080 bore pistons dome piston 043 043 3 mm ring package gas ports assembly is all balanced just needs a block 1500 plus shipping from 49002