Search results for query: *

1975 PLYMOUTH DUSTER 7 1/4 REAR END 2.76 GEAR IF I REMEMBER RIGHT DRUM TO DRUM $ 25.00 PICK UP IN WESTEN MARYLAND 21783 CHECK OIL DID NOT LOOK BAD AND TOWED THE CAR 3 HOURS TO MY HOME NO NOISE .

MR GASKET VERTIGATE SHIFTER 4 FOUR SPEED A BODY I have a Vertigate shifter that i bought years ago and never used or mounted it it is for A body and has surface rust on the black parts from sitting in my garage for years box rotted away has light scratches on chrome and very small chip in...

HERE are some parts i had removed from a 75 duster . if they don't sell there going to the scrap yard . see if there is some thing you can use. oil pan $ 15.00 plus shipping oil pump pick up $5.00 plus shipping...

I have two New right hand threads tie rod ends with no grease fittings $ 10.00 for both plus $7.50 shipping. I have two right hand thread tie rod ends one is NEW moog ES401r The other one was installed on a car i bought that sat for 10 years when i got it it was not painted so it was...

I Have a Milodon 8 qt street street oil pan with pick up tube #30940. previous owner put a rod through the left rear and patch it . Bought it from him and had to buy a new pick up tube i use this pan for two years with no leaks when i removed it i cleaned it and touched up the out side...

I have one rocker shaft right side I think 7 rockers and spacers FOR ALL SMALL BLOCK LA Shaft very little wear same on rockers spaces must be made of soft metal were rusted blasted them still use able only space the rockers . These were sitting in my basement since 1995 would run a brush in...

I have a set of 3/8 stem cut to fit 0.531 outter guide and out side of seal is .620 they are for small block or big block mopar the set is missing one seal you can get one from crane or you can get one from comp cams #505-1 $20.00 free shipping from Maryland 21783

I got a ED Hamburger oil pan and pick up for my engine and it had the Milodon 19050 high volume oil pump kit for small block the direct connection # was p3690852 this is a old nostalgia from back in the day . Took it apart the pump was in good shape body and cover had no wear the rotors had...

Mopar 833 4 speed transmission was rebuild 2 year a go has 200 miles no noise has light pitting on 3 gear from sitting before i got it, no gear noise . some wear on 4 gear synchro teeth but does not pop out of gear is a 1969 a body date code is feb 17/ 1969 fits 67 up 76 a body cars out put is...

MOPAR 360 non roller block with main caps has been sleeved to 4.060 bore for stroker kit will need to be bored to 4.070 0r bigger if you want. Block was decked just need to clean gasket surface . can be used also as a big bore kit with stock crankshaft and rods ,. . got this in a parts deal and...

Good Used set of Speed Pro l2316-f 30 pistons 10.5 compression .The top were clean with walnut shells and cleaned in parts washer then re coated the skirts with molly coat . The pistons are in good shape the top of the piston have light pit marks from my friend running his engine to lean at...

I have a 1985 360cu block that has been sleeved for a big bore it is 4.060 now will have to be bored to 4.070 or bigger block was decked and just need decks clean up $ 350.00 would like it to be pick up in maryland 21783 but if you want to pay to ship it you will have to set that up. i will...

Mopar 8 3/4 small yoke fine spline with Moroso girdle race caps. caps screw in and also have lock on end of bolts for extra hold. $75.00 plus $8.00 shipping

1976 Plymouth slant 6 short block locked up from sitting 1999 to 2021 moisture damage. IF you see a part on this you can use let me know most parts $5 to $10.00 plus shipping oil pan $20.00 if you need a piston or rod i will try to get it out .

Just removed less than 100 miles on it . same reason as other parts i sold going back all stock. center force DF 269739 kit all street mile on this . 23 spline disc 10.4'' just broken in no wear on pressure plate very lite marks from sitting . Can use stock bearing with it . selling for...

Selling a set of Moser race axles with green bearings a 3 '' long 7/16 ARP studs will also give you a set of open back lugs for steel wheels if i find were i put them . axle have about 200 miles on them . $250 plus shipping they are heavy . just looking at mid county about $ 42.00

I have a set of china Exhaust tip i got for my duster a couple a year back and didn't like them so didn't use them . Good for daily driver or if your not real picky about how they look they are 2 1/4'' inside . they are 8 1/2 '' from mount to tip and same to rear they were listed as mopar...

ORDERED THESE FOR A BUILD AND DIDN'T USE THEM Speedmaster Cast Aluminum Cylinder Head Small Block Mopar 318/340/360 w/Hydraulic Flat Tappet Cam Part Number: 746-PCE281.2146 $1,129.00 FREE SHIPPING . INTAKE RUNNER 170cc / VALVES 2.020 IN EX 1.620 / VALVE ANGLE 18 DEG / BRONZE...

I have a PRW gift card you can have if your ordering any part from prw dealer . just PM me you name and address and i will send it out to you .

If you can use it if your buying any PRW part for your engine you can have this $10.00 gift card for free . You must buy you part from one of there dealers and then mail this card with you copy of the invoice, If you want the card p.m me with your name and address and i will mail it to you...

Selling a set of M.P 4772576 Heads that have 25 1/4 mile passes on them and about 200 street mile to the track and back . Just took them off the car as i am going back to stock so i can used this car more . They have 2.02 / 1.60 Milodon valves , Hughes 1129 double valve springs and...

750 PERFORMER 4 BARREL . WORKS GOOD just took it off 12/ 14/19. I am going back to all stock parts , i did add the elect choke off one i had 2 years a go. OFF of my 340 4 speed $175.00 ready to run .

HAVE TWO MAGNUM HEADS TWO DIFF CAST # BUT ARE THE SAME HEADS . THEY NEED SOME SEATS. ONE HEAD IS PORTED / ONE HEAD IS NOT ,BOTH HEADS HAVE THE SPRING SEATS CUT DOWN 0.080 FOR MORE LIFT AND ARE CUT FOR VALVE STEM SEALS , BOTH HEADS WERE SPRAY JET CLEANED AND TESTED FOR CRACKS. SOME SEATS ARE...

Ordered this cam for a stroker engine and never build it . This is a new crane hydraulic roller camshaft #699641 or HR-238/365-S2-14 IG will post this in there . lift, 0.548 in 0.558 ex with 1.5 rocker adv duration 300/308 got this from summit racing box was in bad shape so they sent a plan...

I have a set of new Hurst shift shift rod levers i never used only bolted up the reverse lever. They are 4828 / 4829/ 4830 / They fit many models 833 A&B Fit ram rod / super shift and some v gate paid $78.00 for them ASKING $62.00 and will ship for free.

I have a new set of speed pro hyper tech pistons and moly ring set .030 over fit 1971 to 1991 360cu $115.00 and will ship free

Hay guys , just wanted to put this on there first before eb in case some one want it . It's a set of proforged fast ratio idler/ pitman arm kit #116-10026 . I got it for my 70 duster and didn't know you could not use it with headers. Fits a/b/e body cars but on a body before 1973 you need...

I have a 7 1/4 gear out of a 71 duster works and a bench seat from the same $50 for the rear $25 for the seat it is ripped and needs recoverd spilt bench no arm rest sold the head rests . Also have a nice steering col for power steering you must put your key switch and turn switch in it...

I have a volo brand vp12.2 performance chip add on box for a 2010 challenger. It is add on at your obd plug , it also learns how you drive after 50 miles and set it to the performance curve map. It will not leave a foot print in your ecu . Works very well for what it is ,you cam fell it map...

I have a reman 10 1\2'' pressure plate that i did not use . . Asking $60.00 plus $15 shipping