Separate names with a comma.
Ideal would be a few threads out the top , but if the pattern on the valve stem looks good and you watch the bottom of the rocker so it does not...
Mark the top off the valve stems with a sharpie. Install rockers and adj. bar over the engine . loosen rockers. They will leave a ‘clean’ spot...
No metal in oil = great sign.
Not a bearing
If it chewed up a bearing there would def be metal all in the oil. You would not miss it. May be...
Remove the oil pan
Check crank end play
Check rod end play
If nothing jumps out at you, start checking rods one at a time. You can def reuse the...
Get some ARP rod bolts, then resize at the machine shop
I had to shim ( washers) between the one side of the mount to the block on my 440. I believe it was one washer . The metal mount is just a...
Look around and be patient. You will find a set of Schumacher. To me , the ease of install and working around them on tune ups ...... is worth it
I put one similar to that on my 440 with shumacker headers. Came REAL CLOSE to the header I will have to see how it works
I will let you know where it's made when I receive it. I went with the AC delco one. :thumbsup:
That link that dart 360 sent is the exact one I used. The engine has to be out ( sorry) then drill the holes in the corners first, then I used a...
I know AC delco is generally GM, but I have used their parts before, nice stuff.
You like the power stop better than AC delco? I am ready to buy one too. Thanks
If you still need the pic , let me know. I can dig one up. Just did the notch on my 69 . Had a pic with measurements
What stater exactly did you use ?
Fit looks good.
When I last spoke to him , he said he is ‘relocating’. Some people have had luck ordering mounts or torque straps , but headers are long gone. He...
Thanks. I haven’t checked in a while.
Seems he sold the biz. Who knows when they will start making headers again , and if they will be quality ?
I will give him a call. I have spoken with him last month, maybe it's just that they are not making headers right now. I did not ask about other...
Is that a 3 core ?
Good looking project Momduster
What headers are you running ?
383 or 440 in there ?
I wish it were that easy !
Schumacher is currently out of business. So new is not an option right now. Maybe later this year he will be...
Schumacher are MIA. Unless you already have a set , they are like finding hen's teeth. :lol:
What brackets did you make as a lower mount for the cross flow rad. ?
I am going to be buying a rad and see a few people go with the crossflow....
Happen to me when I finally got my block back from the machine shop.
Pull the cam back out , the bearing will show the tight spot (...
You still have the TTI's ? I would be interested
Is that true ? B body headers will fit a 440 in a A body ? How much do you have to " adjust " #7 tube ?
Thanks for the info ! Engine is together , on the stand. I do not know how to up load pics here.
Thanks for the info !
The isky cam has 530 lift and 248 degrees of duration at 050". Total duration is at 296.
Looks like I went " more is...
Beautiful Dart !! Badass !