Separate names with a comma.
Man you replaced a lot- Looks great
Yearone makes some extra large Rallye Wheels and you can get the chromed- Real nice
So in 73 and 74 the 340-360 Dusters (most of them) came with the 8 1/4 suregrip rear end. Usually 3.21 or optional 3.55 gears, and they are big...
Nice work- beautiful
Like that Super Mag 60! Old School
Again, when you tell the average guy that 275's will fit, and they end up like the guy who started this thread. There is a problem. It can be very...
Sireland, I cant believe how much space you have on the outside- You don't get that on a 74 Duster
4 1/4 backspace with 255's - Don't go bigger unless you want to problems
Here is the number I have p4349217ab- Its not Turquoise
I'm in south Florida, Coral Springs 33065. Have a 74 Duster Hood. The previous owner drilled holes in it for the small scoops that belong on older...
Yea, it was pretty common
K&N makes one. Good price on their site.
How about some that flow better than stock?
What kind of fuel filter do you guys use? Factory 5/16 line on a 360. There are so many options.
Yea, they stopped making the reproduction one that goes over the hump. Classic Industries used to sell them
Ok, I just did this a couple months ago on my 74 Duster. Yes the Gabriels don't (too wide) fit, but I got a set of Monroes. They did fit. They...
Or is it a Pitman shaft seal?
If the size is right, you could shine them up with some Mothers Polish
The shaft on the bottom is called a Sector Shaft right? So I need a Sector Shaft Seal?
So Redfish, remove the Pitman arm, Dust Cap and Snap Ring, on the lower one and just start the car and the seal will blow out. Then I will be able...
Any advice on the output shaft on the underside in the middle upper area?
It's leaking from the back side in the center.
74 Duster- So my Power Steering Box is leaking, but it works fine. What are my options? I know Lucas has a fluid that they claim will stop a leak....