Separate names with a comma.
The constipationality of that statement it's just the epitome of groovitude.
There's somebody riding shotgun in the car on top in the second picture.
I have an adapter.
It is a 5.2 magnum motor that I got as a core. If you want it, you can have it.
What did you use for motor mounts?
I don't think J-B Weld is going to fix that one.
Found this on ebayAdvance Adapters Dodge V8 Engine Weld-in Mount Kit for sale online | eBay
Like the song says
No stems no seeds that you don't need Acapulco Gold is badass weed
Who is this?
See no side to side shift.
Lol, my arm gets tired using a manual fuel pump so I use a mechanical or electric one.
Nobody has had their car sideshift when going down a crowned road. Cross ties prevent this.
Looks like 2 trannys taking a wizz.
Are you using a V6 to V8 adapter kit or a 5.2 side mount block for this?
Growing up we had a lot of station wagons. (M & D & 6 kids) We put foam mattresses in them when we went camping. Usually weekend fishing trips.
It is a stroker motor. It has a 3.58 crank in it and it's a 340 block.
Say this again please.
I believe the 3.9 flywheel will bolt up just fine to the 318. However if you're going to time the 318 off the flywheel you will have to get a 318...
I guess that means you don't need any input for me so I'm out of here.
I see two ways that you could do it.
1 is to just have the power going through a switch on your dash or console or wherever going to the overdrive...
Have you tried it with 15 - 40?
What if you set the idle at 900?
You've got plenty of Cam in that motor it wouldn't hurt it a bit.
Drive it.How about increasing the idle to 1000.
He's using a manual shift valve body.
12 PSI at 800 RPM is better than 10 psi at 1000 RPM.
What is your pressure at 2000 RPM?
Straight from the manual for the 73 318 + 340 minimum pump pressure at idle 8 PSI. Operating pressure at 2000 engine RPM 30-80 lb....
Do you have a small block to big block adapter plate?
What are you wanting to put it in?
How far is Alberta? By the way why not use a 42 instead of a 46?
Find a 2 wheel drive pre 96 Dakota with the v6 or v8.
I only see 4 threaded holes in the outer ring.High dollar
ATI - TF904 Low Sprag Assembly