Separate names with a comma.
I Solder and shrink wrap mine. At least use a good quality connector. I can't say I've used this style ones like these ebay ones but they seem...
I used a lighter gauge on my 340 Ragtop. Less weight and worked out the same.
OK, another alternative. When I bought my frame peices I had them cut to exact lentgh $25. How much would a bodyman charge you to weld them in? He...
Bought stock for $25. Overlapped rear frame nice and welded to rear floor pan also,[ATTACH][ATTACH][ATTACH]
Sorry, I didn't read it just used as an example .
Anyone flowbench the trickflow 190 heads yet???
There are posts out there on this.
And will suck coolant back in while cooling down.
Actually top of tank with a grommet. Then just fill 1/2 to 3/4 with coolant.
If I used it I would cap off the bottom and drill a hole in the cap and feed into the top. I do like it.
I used an E body one in mine. Kinda hard to see in pic.
I had cranking issues for about 6 years until 67Dart273 saved my ass. Now my motor cranks awesome with a battery thats only at 75%. Don't want to...
Sorry for the long rant .
I had a 72 Demon 340/4spd just out of High school. I dented the r rear quarter right where 4 lines come to a point next...
I'd love to get a high miliege 6 cylinder Challenger and Back half it and drop my 500 stroker/727 in it but I'm just dreaming .
What are the last three digits on your chuck ? 489 ? 742 ? 489 has the crush sleeve . Others have shims.
Highly recomend this gasket. jmo
Thermostat Housing Gasket (SILICONE) MOPAR V-8 ENGINES - Part # RG-53063 | eBay
It has a spot you can drill and tap an electric fan sensor.
Here's a low budget one that someone here bought and said they liked .
I have a 2500 stall behind my 500" stroker and it flashes at around 2700 2800
How about Lee.[ATTACH]
Your a pretty fart smella I mean pretty smart fella ! lol
I will Pm you my phone #. Thanks
PM sent if deal falls through
Say there out of stock
Maybe an oil pump with a groove and a gasket could be made.
In the pic it looks very milkey . You wouldn't get that from disassembly. I would drain the oil to make sure. Just my 2 cents.