Separate names with a comma.
On a 69 LA 340 which water pump mounting bolt holes are not blind and are drilled into the water jacket of the block? All?
Thanks in adavnce
I run a Comp retrofit roller setup in my 340.
The cam makes great power with the right convertor.
The hyd rollers suck, they are noisy and limit...
Do you recall?
Was that noiuse cause by retrofit hydraulic rollers?
If it is your dream to build a 5 liter SBM engine for the street and or track you should do it, I would love to see it done. They were some great...
Those numbers are really low.
Good thing is they will probably will have ring sets on sale for black friday
Pull the plugs
kill the ingition
Wire the throttle wide open
Crank each cylinder for the same amont of time 4-5 crank cycles
Have you run a compression test since this oil issue started?
Didn't mean to piss anyone one off.
Just drives me crazy when smart people use off brand none OE parts.
If you cant figure it out it not worth trying to explain it to you.
I cant help that.
Always stick with OE parts
Buy american when ever possible
I would never recommend someone purchase an alternative chineese product.
That figure's you are from the north coast - MN.
I dare you to leave this up.
Blow off the cheap ching-ching parts and do yourself a favor and purhase your parts from a Stihl dealer. Run good parts and good fuel and you will...
Place a WANTED ad here on FABO
There are no reproductions available
You have somehow screwed up the PCV system, should be hooked up to full manifold vacuum at the base of the carb and vent thru the vave cover.
The non clutch fan, what is diameter?
Actually I have seen 3 bolt designs
Sorry to jump in on a sales ad
New price $75 plus freight
Just so you know.
They are never 100% done.
Decades ago most thrmostats came with a hole in the flange along with a "jiggle pin " in the hole that would break the surface tension of the air...
Al, I looked for crank pulleys - no find.
Good question Rusty
I'm still stuck on which type balancer you should run.
Mine is a one piece solid SFI type and was balanced with the rotating...
The audio sucks
Just curious, what paint are you using?
Will do when I get it out of the car.
Stay tuned, I work slow
Then one I need would fit a pre 69
No aluminum pump.
We have had to put done several really good labs or the years.
Certainly some of the toughest days I have ever had and would not wish it upon...
I cleaned out my inbox
Tried to PM you and the system said that your inbox is full
Yes I am intersted
A pic or 2 and some diemensions please
I want to replace the 3 groove rubber isolated crank pulley on my 1967 SBM, factory power steering and factory A/C with a one piece steel or...