Separate names with a comma.
Jpar is referring to priming the oiling system before you fire it for the first time. Don’t worry, I’ll help you with that when the time comes.
If the sheet calls for .019 and you’re at .024, in my opinion it’s good to go. Send it.
Yep. If you stick a wire or something in that hole you’ll see where it comes out the bottom. Notice the corresponding hole on the deck of the...
Looks more like a dragster in the other lane to me.
Gettin too old for this toy[ATTACH]
I keep the kids busy with toys now.[ATTACH][ATTACH][ATTACH]
RAMM, what is your opinion on those Johnson solid lifters? I put a set in my 422 that is still under construction.
I’ll be watching this thread...
Question - would a wider rim or narrower tire reduce some of the tire wadding? I always heard radials like a rim that is close to the same width...
I used RaceTec forged pistons in my .060” over stroker.[ATTACH][ATTACH]
How about a ‘70? Bringing it back to life.....[ATTACH][ATTACH]
Ohhhh no you don’t! You threw the match on this dumpster fire! You’re stuck in this for the duration now buddy......
I have my 2 step wired together with the line lock also. Works just fine for me.
Yep. 275/60-15. Love em.
Time for some new picks.
Unfortunately the hipsters have driven up prices on my beloved blue ribbon in recent years, but at least it is now found on tap at more...
Good enough for my grandpa makes it good enough for me![ATTACH]
Blue Ribbon beer for blue collar folks.
I believe member @AndyF built a knarly 470 for his Duster project.
Starting a BB Duster project
Worth the time to read through this thread. TONS...
I used “O” heads on my 318. They came off a ‘73 340. I had 2.02 intakes installed, took .050” off the deck surface and .040” off the intake...
Honda. Don’t waste your money on anything else. Most reliable machines out there.
How much was the stroker kit and who did you buy it from?
I see John is off his meds again..
Headers? Gasket could be letting go.
Pics or it didn’t happen.............. sorry, I just wanna see your blower.
I’m in talks right now with a member here on purchasing the correct iron rockers that match what I have. After getting the correct rockers I’ll be...
Here are some interesting pictures from a member here.
1.6 PRW rollers look awfully close to same length as the W2 exhaust rocker.[ATTACH]...
I think this may be more cost effective than having new custom stands machined to put the shaft where it needs to be.Guilty as charged.The...
Looks like the HS kit includes shafts/stands
That’s sound advice. I appreciate everyone’s input to this point.
I think my first step is going to be removing a couple valve springs and...