Search results for query: *

If you're running the factory V2 compressor, you'll want to do the oil level check in the FSM and maybe replace the shaft seal if there's a lot of miles on it. You'll need some AC 150 mineral oil or better yet Ester Oil, as it's compatible with residual R12 mineral oil AND 134a. X2 on the...

He listened to people's Suggestions as for as I know. I don't know who builds engines on this forum for a living as the opinions, advice is all over the place

Call Mike jones cams or Oregon cam grinders and tell them your car specs.

The states don't have that. There's a title transfer fee but it's only a couple hundred dollars

I have sbp 73-76 rotors. Lets me go to 73-76 front end and keep my wheels. Anyways. Looks like the dude has a KH setup (you can see the hard line on the caliper in the first pick), suggesting that he needs little ball joint 67-72 arms.

My view of the world today. Arghh, but it has to be done.

By the specs I bet that would be a good runner probably too much lift for my 1.6 rockers without cutting the guides down.

I have a 1972 Demon with factory AC with the same grommet. One vacuum line goes to the vacuum canister to supply vacuum to the interior controls, and the other goes to the heater control water valve. I also wanted to replace my heater core. I bought a new one that was close, but just didn't fit...

Got dash painted, hvac bolted in. Hung it from the rafters and pushed the chassis in. Feeling rough today, so things were going slow. Losing momentum or motivation, not sure

I known it's always been there, but was wondering "what" it is for(besides lining pockets). Looks like it's for possible infrastructure upgrades? We looked at a house just outside of town. 2 acres, on well and septic, no services besides garbage and recycling pickup. Listed at $700k, and LTT...

Lunati's VooDoo 268 would be a good one. Nice and lumpy in a 318.

This will probably open up a can of worms as this subject has been well covered but I am interested in some recommendations that folks have actually built and ran. Here are the particulars. Care is a 73 Dart swinger 3.23 geared 25" tires factory high stall converter in 904 with a TF-2 shift...

I suggest your friend had to buy more than one part because he got his info of forums where guys who’ve never built engines for a living.

SMALL BOLT PATTERN ROTORS, for the 73-76 A body cars? 6 cylinder Drum brake car? Why in the world would you want anything like that? I haven't heard of that at all, till you just brought it up. Ok then, who has them, who do you get them from? Not to go off track, from the original posters...

Thank you guys, found a nice offer, t-mobile 30days unlimited for 40USD! T Mobile has a nice countrywide coverage speciall. east coast!

Cast crank slant six uses a different block, rods and crank than the forged crank slants. The rod and main journal are narrower. If using the 2.2 pistons make sure they are compatible with whatever rod you use. Not only on the pin location/rod length, but on whether the pistons are for floating...

the only thing is, I have a 72 jack already. So even if my rear bumper has provisions for the hook, I’d need a different jack and the hook

Makes sense as dont think location matters as only a tensioner

I will take it!!1

You've gathered incorrectly. This is why one dipstick and tube does not fit all. For example, try putting a 67-76 A body slant 6 pan on a 66 and back slant 6 A body. Ain't happenin, because the pans are shaped differently. There are subtle shape differences in V8 pans as well, so you have to be...

Always been there, currently averages about 1.5 % Calculating Land Transfer Tax | Land Transfer Tax

it used to be this was the one true way to tell, but now with the availability of SBP rotors for the 73~76 set up it can throw you for a loop. add into that the upper ball joint adapters and it could really go either way. seeing the brakes and measuring the joint is the only way to 100%...

N.E.USA.....100billion...classic....cars!!! :thumbsup: :steering:

Feds..between,,,,rock,,,hardplace. :BangHead: :thumbsup:

Hoping this doesn't go "too" political lol. Lori n I looked at a house recently and looking thru the paperwork from the RE Agent the land transfer tax was $44k?? WTF? I've bought houses before but I've gotten to the age where I question a lot of the **** going on. What is it you get for land...