Search results for query: *

Check out engine masters episode’s for more information. I think you’ll find there are also header wraps. The coating & wraps don’t keep heat in the chamber. They help keep heat in the header tube and out of the engine compartment so the engine doesn’t consume hot air as that doesn’t help make...

The extra exhaust duration helps get more exhaust gases out and will add a few more rpm to a single patterned camshaft. Headers or not. I running this one in my 5.9 with the trick Hughes springs and retainers. (727/2500 stall, 3.55 gears.) Mellings makes OEM repops. Patents expire after...

They get you coming and going, one way or the other, both parties are being bent over the table.

It can always be redone. IMO, it’s not something to worry about.

No. I’d recommend that cam with a minimum of a 2,500 stall converter, & a min of 3.55 gears with the typical 727/904 trans.

In my opinion, the 904 tap it diameter cam is overrated. It shows benefits and Racing that’s so much of the street. Hughes does have a trick spring kit for the magnum head for a lot more left. I think it’s two 550.

What kind of lift do the Magnum’s handle stock?

The Comp Cams XE 268 below. .480 exhaust lift divided by 1.5 then multiple by 1.6 equals .512. I think it will clear. My purple 292/.509 cleared OEM J heads, you need to check your stuff out. DODGE COMP Cams 20-223-3 COMP Cams Xtreme Energy Camshafts | Summit Racing

RustyRatRod usually just writes .750 roller! LMAO! 6/8*’s smaller than a 340/360 would use. For what you described, I have done. I was very happy with a 218*@.050. It made for a very good driver and power to 5500 with headers, 2-1/2 exhaust, LD4B dual plane and a 600 carb. This is the max...

He no longer posts here but I just texted him for the answer. He just answered me with / I believe it’s the old Crane/MoPar Performance rockers.

Nope, 600 - min Nope, 1.88 at the min, 1.60 good Dang small cam! 2500 stall is the min. OK with the broom stick cam & gear ratio listed. Depends on how he point of view. I’d say no. Keep thinking! It’s good for the brain.

7* is better but bullet proof? LMAO - Hey! That was a great joke.

Well, I found my “769” W2 race head flow sheet but I can’t quickly find the ported sheet. It went 324cfm with a 2.08 valve. I don’t remember the valve stem size though. I know I should! This particular head was the latest and last head with MP revisions.

OK, by by. You’ll get over it. LMAO No. I don’t know where you read that but not all articles are actually factual. 1 case in point I was reading some guy said you don’t want more than a 200cc runner on your 440, ever. Yea! We know this guy don’t know a freakin thing! As suggested earlier, a...

Absolutely agree. Many times people will post the question but state they don’t want to spend the big bucks. I get that! This is where I say use the Summit Racing headers and there exhaust kit for the car.

You say this, not I. It’s is a proven fact that has been done over and ver again by not only magazines but by members here. So you can “LOL” all you want, it works and no matter the amount of nay saying you say, at the end of the day you’re still wrong. Your also misleading members by being a...

This is completely wrong. 100%. Sorry buddy, been there done that just like 318willrun. Headers will add torque & horse power and mileage. I suggest one of two headers. The above Doug’s headers or the Summit headers. The Doug’s do not have any tubes that go below the steering linkages on the...

Given the 3 choices, I personally would run the Speedmasters and have them bowl ported before they were used. If f spending the money is not an issue to you, follow me advice. The Speedmaster heads unported will out flow the OEM Iron heads. Porting the bowls is just more power.

Yep, like said above, the standard LA intake and exhaust bolt patterns are used making any ‘66 plus intake or exhaust a bolt on. IMO, these heads on a 340 will be really nice.

American Association of Wet Jugs

Any Asshole Will Judge

All American Jack (Daniels) and water

Alluring Amazing Wet Jugs

All American With Jesus Just sayin…..

I’ve thrown there springs out in favor of what I need vs what they came with.

Promaxx gets the Chink castings and machines them here erasing the crap work into excellent work. I have a set of CNC small block heads. Veeeeeery nice!

Not with the set I got. Still made in America cast in California. It happens with every head manufacturer, bar none. You just hear more of anything Edelbrock because they outsell everyone else combined, so there is more good and bad press about them. They blow chunks over the last 2 sets I...

You already have the cam, run it. It’ll make for a nice easy driver. If you’re looking for that muscle car sound as well as increased torque, look for a cam a 108 LSA. Take a peak at “Howard’s cams.”

What are the numbers on the back pad? FWIW, those model numbers should always be posted.

He don’t know