Search results for query: *

44" Perch centers Was in a 69 charger Unknow gear ratio $400 Scott Township, PA Paypall FF, cash in person, money order.

46" Perch centers. New green bearings on axles 11" backing plates $500 Paypal FF, Money order, cash in person Scott Township, PA

Used gear set and carrier. Open. 2.76 Gear set. 489 Case. $175 + shipping. Paypal FF or Money order. Scott Township, PA

Looking for a few of the roller cages with ball bearings from seat tracks on a 68 cuda with bucket seats. Cages are steel and do not have the long arm with offset rollers. Rollers are directly across from each other.

Im working on the valve body for the a904 from my 1985 Jeep Cherokee. When I took it apart the detent ball and spring for the rooster comb were laying on the valve body. Also notice there is no pin in the hole behind the spring. See picture. It's been a while since I've done this, but I'm...

Howdy. My 68 Barracuda came with a narrowed 8 3/4 rear with a Right Stuff disc brake conversion. I do not have brake cables yet. Do the stock cables for the rear axle work with these calipers? I understand they will be long due to the narrowed rear.

Installing a wiper switch on classic dash insert for 68 barracuda. Holes on both the classic dash and original panel are the same size. Installed bezel nut on wiper switch, seems like switch will pull through the hole. Does this on both the original and the classic dash. I looked in my 68...

I thought all head sides on the 13 slant 6 exhaust/intake studs were 5/16 - 18. I've got a head off a 1970 Slant 6, the back top hole in the head is defintely larger than 5/16. Is it possible it came 3/8 or is this just someone elses mess up. I did not comfirm yet, but Im thinking its 3/8-24...

Putting a 68 Barracuda back together that came in pieces, wondering how the quarter glass meading edge trim is attached. Mine is the style without any clips or fasteners. Theres a black channel inside the chrome that obviously nakes contact witg the glass. Its doesnt bite hard enough to stay...

This fiberglass wing came with my 68 Barracuda. Im not diggibg it, so its up for sale. I have no info on it all. Its missing a screw or two, but looks to be all there. $100 plus shipping from 18411. Paypal. Venmo. Money Order.

68 barracuda notchback Installing headliner. Do the interior roof rail trim pieces going in before or after the headliner? How many clips hold them in? And anyone have any pics of them installed? Thanks.

Im looking for a good core case of a 904 for a slant 6. Thanks.

Looks like someone threaded a puller in too far or used a bolt to force the pump out. If I smooth this out , whats an opinion on this not leaking/leaking behind the pump.

Is there a part thar goes over the screws between the top metal of the dash and the windshield. Im looking for one for my 68 barracuda. Tried search, was not successful. Thanks.

15 x 7 4" Back Space 5 x 4.5 bolt pattern $500 OBO Scott Township, Pa 18411 Buyer pays shipping or will meet within 100 miles Cash, Venmo, Money Order

Pulled from a mismatch in a 69 Charger 44" spring perch centers Open carrier Not sure of ratio $400 Pickup near Scranton, Pa 18508

46" perch centers. Backing plates for 11" brakes Axles with new green bearings installed $600 pickup near Scranton, Pa 18508

Wondering if anyone out there has my old barracuda notchback. Was sold as a chassis in the Scranton area back in Sept. 2013. BH23F8B154132

Ive got a 68 barracuda and im looking for opinions on front wheels and tires. Big bolt pattern, dr diff wilwood disc brake conversion, late a-body spindles. Ive got a set of 15x7 4" backspace wheels laying around. Anyone out there know if these would work with a set of 225/60r15 tires? Ive...

Ive been looking for an accelerator cable bracket for a Super Six conversion Im doing. Anyone ever see or use this: https://sportcompactwarehouse.com/big-end-performance-16031-throttle-cable-bracket?Year=1977&Make=Plymouth&Model=Volare Just wondering if it would work. I needs a Lokar cable...

New Melling 3-495S Timing Set 25$ + shipping From 18411 Cash, Venmo, Money Order

Set of SBI small block ir /6 valve springs. Count is 12. $30 + shipping From 18411

Im looking for the metal package tray for a 68 barracuda notchback.

Is the beveled was for the cam gear on a slant 6 that same as the small block cam washer?

Small block A-Body Sway bar k-member spindle to spindle. Located in Scott Township (Lackawanna County), PA 18411 Asking $500 for everything. Cash or postal money order. Not shipping. Can come pick up, would meet if distance is reasonable.

I do not know what these are from. I needed a Slant 6 K-Member and all these parts were attached to it. It's definitely pre-68 as the idler arm pocket on the K-Member was not in double shear like the later ones are. It's 10" drums, spindles, and the steering linkage. $100 - would prefer a...

Hello all. I've got a 68 Barracuda, still on torsion bar front suspension, Dr. Diff front Wilwood disc brakes with a 5 x 4.5" bolt pattern, and later A-body spindles and upper control arms. I've got a pair of Mickey Thompson ET Street fronts in 26 x 6 r15 laying around that I was thinking about...

Set of 2.76 gears from a 742 case. 110$ plus shipping. Located in 18411. Paypal f&f or postal money order.

2010 WRX 2.5 Turbo Cylinder 1 Misfire Needs an engine or a rebuild Body is ok New Goodyear tires Included: set of snow tires with 1 season on them, set of brakes and rotors, 2 driver side rocker panel skirts Open to negotiations or trades. 190000 miles $5000 Scott Township, PA 18411

What's everyone running up front on their 68 barracudas? Pics, tire/wheel specs, suspension mods.