Search results for query: *

So guys, what is the right size of stud for my 67 dart with 10" drums all round? ive found these 2 sizes listed on Laysons: 7/16"- 20X 1-1/2 with.472" knurl diameter and 7/16"- 20 x 1-7/16 with .555" knurl diameter It says they are both for front but nothing listed for rear...

Can anyone tell me where I can get the above from please??? I cant seem to find it anywhere!!!! Thanks Nick

Can anyone give me the specs of the factory wheel studs?? I bought a new set for my 67 dart but the knurling doesnt seem to be as long as the factory studs?? The knurling used to end flush with the outside of the drum but the new ones dont quite reach the drum face?? Thanks Nick

Guys it seems ive got some water collecting in the footwells of my 67 Dart. Can anyone tell me where to start looking for the leak?? I cleaned the cowl out the other week so thats clear. Any help to save me some time would be much appreciated. Nick :scratch:

Can anyone tell me why an Idler Arm for mt 67 Dart is so expensive?? What makes it different to other years?? Im thinking about getting a Front end kit but they dont seem to have the idler arm in there too!! Any advice on this matter chaps?? Thanks Nick

Would anyone be able to show me a picture of a Parking Brake switch for a 67 Dart??? Thanks Nick

Hi guys, Ive made a carb adapter to change the Carter BBD on my 273 whilst it gets rebuilt. Now what I want to know is would it be possible to use a Autolite 4100 carb on the 4bbl adapter?? Obviously id have to fab up the linkages but other than that can anyone think why it wouldnt work...

Guys, just noticed my carb is leaking fromt he circled area in the picture. Has anyone got an idea why it would leak from that area and if a rebuild kit would solve it?? As always, thanks. Nick

HI guys, can anyone recommend a rebuild kit for the BBD 2bbl carb on my '67 Dart with 273?? Thanks as always Nick :thumbup:

Well after our last dog died we knew we wanted another but waited until we'd moved. Well the tme came and we just bought a 5 week old American Bulldog. I should be able to get some up by tmw for you all to see!!! :thumbup: :thumbup: :thumbup:

Guys, My 67 Dart with 273 has the oil filter on the top of the engine bay yet when I look at other 273s its not there?? Anyone know why they are different?? Cheers Nick :thumbup:

Guys, Ive been let down big style by Year1 on the TC, flexplate for my A904. Ive got another company on it right now but they asked these questions: A few questions on the converter: 1. should have 122 teeth on the ring gear that is attached to the converter. 2. does your input...

Hey guys, I found a distributor in the trunk of the Dart.It has the number below on it?? 2642238 31 6 Can anyone tell me what its from or what year or anything really?? Ill get a piccy up of it tmw for your perusal. Thanks Nick :thumblef:

does anyone know if it would be possible to make the front bench seat in my 67 dart a full recliner?? Nick :thumblef:

Should it be possible to turn the stock fan by hand on a stock 273?? All the belts are on the engine and I gave the fan a quick tug to see if it was tight, it moved around?? All wheels on the ground and in Park?? Thanks Nick :thumblef:

Has anyone got or know where I can find detailed instructions on installing my new Torque Converter and Flexplate on my A904?? Thanks Nick :thumblef:

Guys, What causes the teeth of the ring gear/TC to get chewed off?? Is it just an old starter motor combined with an old TC?? Cheers Nick

Hi Guys, The flexplate in my Dart has no teeth left thanks to a bad starter. Ive got the new starter but i need to know if the flexplate or Torque Converter is a 10" or 10 1/2" bolt pattern. A company over here has both but which size is it?? Thanks again Nick As you may be able to...

Hi guys, Can anyone sudgest companies that sell the bolt pattern adapters?? I cant find them on Summits website. :thumblef: Thanks Nick

One little problem to fix and thats a bad ground on the headlight switch. The only ground I can find in the diagrams in the headlight circuit is near the front right headlight. Ill try that first!!

Ive fitted the new gauge panel, had to do some minor mods. The new gauges are ready for fitting!! :thumblef: :thumblef: :thumblef:

Guys how easy or hard is it to swap the front wheels to Big Bolt Pattern 4.5"?? Its a 67 Dart btw. :thumblef: Thanks Nick

Ive just got my new set of VDO gauges for the Dart. The Temperature sender that comes with the kit is 3/8". This is waaaaay to big for the hole in the Stock Manifold. Can anyone tell me what size thread the original sender has and what size sender I can replace it with?? It looks 1/8"...

HI guys, Ive got an Aluminium Fuel Tank, it doesnt have a hole cut out for a Fuel Sender. Ive got the sender etc and have no problems cutting the hole. My question to you fine gentlemen is: How would you fix a new VDO Fuel Sender in to a new Aluminium Fuel Tank?? I dont like the idea...

Hi guys, Was looking at the suspension on the dart today and it is most definatly suspect :sad2: Its got the strangest looking Leaf Springs on with Air Shocks!! Would someone be able to post a pic of what the leaf springs should look like on a 67 dart for me?? Thanks again Nick...

Hi guys, Well i had a problem with the car not pulling enough fuel, I installed an Electric pump then it wouldnt pull any. Checked the lines and they were clear, removed the tank and it seems the tank was fudged with fibreglass at some point. The fibreglass had melted from the fuel and made a...

Hi guys, Just taken the gauge cluster out of my 67 Dart. Both the circuit boards have had it. Plus from the pics can anyone tell me whats what?? Thanks for your help Nick

Hi guys, More questions im afraid. Can anyone tell what model carb this is. Its a Carter. Plus is there another 2bbl carb (bigger) that will fit on this intake manifold?? Its a '67 273 Dart. Many thanks for all your help in advance. Nick

Will an Intake manifold from a 318 fit on my '67 273 without any mods?? Thanks Nick

Hi guys, Is there suppose to be some trim on the windsheild rubber of a 67 Dart?? Thanks Nick