Search results for query: *

  • Users: CUDAGUY
  • Content: Threads
  • Order by date
  1. CUDAGUY

    [WANTED] Small Port small block intake

    Have a Marine 273/318 intake that is virtually identical to a 273HP intake with the exception of a thick cast wall in the water passage between the thermostat and heater line holes. Looking for something to use in place of this. Listing below is #1 choice on. #1 66-67 273HP manifold #2...
  2. CUDAGUY

    Where to get VHT chrysler red?

    Trying to source Industrial Red in VHT brand or at least something close. Anyone know where to get it? I'm having no luck.
  3. CUDAGUY

    Timing set woes

    Pirating the double roller set off my 318 for my 273 build and got down to it and found what seems to be quite a bit of slop. Maybe Im wrong, but the thing only has 5-6,000 miles on it. Safe to use?
  4. CUDAGUY

    273 solid Crower cam opinions

    Putting together a 273 for mostly street use I picked this cam to take advantage of the solid valvetrain I have and with the thought of a smoother idle and good mid-range power. Anyone run this cam before? http://www.crower.com/mopar-273-360-...m-278-fdp.html Dur @ .050” Lift: 229°/229°...
  5. CUDAGUY

    'chirping' 318

    Im having an issue with an off idle chirping noise, almost like the flexplate/converter bolts are loose....but they are in fact tight. It does it in any gear as well. Engine has oil in the pan and its getting to the rockers. Pulls 15" of vacuum. The noise is still there with the alt/water...
  6. CUDAGUY

    [WANTED] 273 LoPro pistons +.030

    In need of 273 2-barrel pistons in a 3.625+.030 bore. Anything you might have even if its just one for a reasonable price. Have everything to put a 'backup' motor together except pistons (was told the block was a cleanish standard bore...really +.030) just trying to get an ok set rounded up.
  7. CUDAGUY

    Opinions on a plan of attack

    Car: 66 Valiant wagon, sloppy school bus manual steering, KH discs, 8.75, HD leafs, etc. (pictured below) Problem: flat out worn out everything and cracked steering box pad on the k-member. Idea for budget soloution/improvements: replace all bushings with fresh stockers. Replace upper...
  8. CUDAGUY

    5x4bp Rallies, 66 auto column, wagon roof rack, wheel covers...

    60-72 upper controll arms $10/pair 65-66 auto on column, power steering column, medium brown in color $30 66 Valiant 200 13" wheelcovers $40 63-66 Wagon roof rack...will also work on same year sedans and hardtops as well, decent shape, some pitting and rust, but complete! $50/obo pair of...
  9. CUDAGUY

    [SOLD] SMALL BOLT US Indy slots 14x7 and 14x8

    2-14x7's and 2-14x8's....3.25" backspace....5x4 bolt pattern decent shape, need restored but no heavy curbage, a couple of broken screws for the caps, caps and lugs included $350 firm +shipping or trade for 489/742 3.23 geared 8.75 pumpkin with a good clutch type suregrip unit perfer not to...
  10. CUDAGUY

    rubber mats...

    anyone repop rubber mats instead of the carpet?....something that will fit an a-body wagon? carpet is cheap but Im cheaper...just looking for something to cover the bare floor
  11. CUDAGUY

    wagon exhaust draft opinions

    anyone see an issue with having the exhaust exit on both sides outboard of the leafsprings but angled down and to the rear? edit: pic added
  12. CUDAGUY

    where can I get windlace/door seals

    My Valiant Wagon is in need of a set but I cant find anyone that sells it by the foot. It doesnt have to be 'correct' it just has to be reasonably priced ($240 for a set is too much for me) and 'look'/fit/function right. perferably black seconding with 'sand'/light brown
  13. CUDAGUY

    273 cam suggestions

    heres what the rest of the package will consist of, looking for suggestions for a very hot cam for the 273 in my Valiant wagon original 273 shortblock (compression test shows 120psi accross the board) late 80's #302 swirl port heads...cleaned up but unported...stock valves stock replacement...
  14. CUDAGUY

    bad coil?

    64 dart /6 I have power to the coil but cant get power from it....on 3-different coils I also had the lead wire from the distributor burn up (has been replaced) any Ideas? Im stumped
  15. CUDAGUY

    64 Dart GT hardtop

    64 Dart GT hardtop 75-225 slant six (freshly painted lotsa new gaskets) pushbutton automatic (904) 2.25" exhaust with turbo muffler and nice tip manual 9" drum brakes manual steering 7.25" rearend (sorry no HD stuff) 2.76 gears 14x4 steel wheels with 195/70 tires with moderate tread...
  16. CUDAGUY

    NEW 340 manifolds at a reasonable price

    http://howellautomotive.com/index.asp?PageAction=VIEWPROD&ProdID=2683 the last used pair I saw was this much!
  17. CUDAGUY

    64 Dart GT hardtop $1500

    located in Portland, Or will be at the NWDRA swapmeet at the Clark County fairgrounds on sunday, January, 30th.....corral booth #712 current forsale thread http://www.forabodiesonly.com/mopar/showthread.php?t=94135 open to possable partal trades
  18. CUDAGUY

    rough in gear idle and off idle stumble

    OK, equipped parts.... 225 pushbutton 904 holley 1920 with new accellerator pump points ignition set to 10* points gapped correctly valvetrain is 'quiet' (checked it cold when the engine was apart and on the stand) Issue is backfiring and stumbling if you 'load' the engine suddenly and the...
  19. CUDAGUY

    backfiring through carb

    trying to get my Dart running. I had it running but it was missing heavily and no matter what I did it would not get any better. Now Ive messed with it so much that I cant get it to fire again. Ive been having issues with the multiple manuals Im using....none of them seem to have the same...
  20. CUDAGUY

    your take on BOV's and WG's

    I have access to a 6.7L cummins turbo (HX40 ???) that Im thinking would be fun to throw in the 273 in my wagon. What should I use to control it? Im familiar with small engines and turbos (neon and SRT-4) but controling something this big is rather intimidating. Im only shooting for 12-14...
  21. CUDAGUY

    how the hell do you remove Master cylinder studs!?!?

    I have two that the PO broke off on my Dart (as well as twisting the line in half) and I cannot get them out, arent they supposed to be pressed in? I have bent the column/pedal bracket and they still will not budge. Please help before I light this car on fire.
  22. CUDAGUY

    need driveshaft length...66 Valiant W/ 8.75

    just need a center to center length (u-joints) for a driveshaft. car in question 66 Valiant wagon 904 auto 8.75 rear with #741 case (if it matters)
  23. CUDAGUY

    need 225 pistons/rods

    Im in dire need of atleast two 225 slant rods and pistons standard bore and in OK shape not looking to spend more than $35-$40 thanks, Jared feel free to call or PM 503-257-4766
  24. CUDAGUY

    whats it worth? BBP power disc setup

    I have access to a big bolt pattern power disc setup for what I think is cheap but what are they really going for now? how about a big bolt 7.25 rear?
  25. CUDAGUY

    small block mopar exhaust manifolds and slant six parts‏

    pair of small block exhaust manifolds, 2" center dump, great for street rod. I think they are off a 61-71 dodge truck......$20/pair obo slant six parts upper alternator bracket 67-72 A-body motor mount biscuit core alternator (seized) drivers block to trans bracket points...
  26. CUDAGUY

    heater assembly interchangability?

    looking at a 66 Valiant parts car for a few things for my wagon (mainly a nice set of doors) and was wondering if the heater assembly will work/fit in a 64 Dart. Anyone know of any differences?
  27. CUDAGUY

    need help removing KH pistons

    So far I have gotten three of the eight pistons out to rebuild my Kelsy-Hayes calipers for my wagon but the other five are being very stubborn. anyone have any tips to remove these? Im ready to start swapping the discs and 8.75 in but cannot untill these are rebuilt.
  28. CUDAGUY

    my slant wont turn over!

    Ok, so after nearly totally installing said engine (72-225, known runner) after it had been sitting in dry storage for a couple years I am attempting to bolt up the converter to the flexplate and got one bolt in and tried to turn everything over (converter spun freely before bolting together) to...
  29. CUDAGUY

    gasp! model A Ford question!

    In plans of using some spare parts Ive aquired Im planning on building a thrown together little rod... so far the parts list includes SBP 7.25 rear suspended by neon lateral links and springs SBP Front end stuff Model-T frame Model-A 3.0L flathead four toploader 3-speed with hurst shifter...
  30. CUDAGUY

    question about /6 vs.V8 904 converters

    is there a differince in the stall speed? Ive heard that a slnt six converter is 2200 or so vs the V8 being 1800. can anyone shed some light on this? It'd be nice to have a little more stall for cheap in my Wagon after I go through the trans:cheers:
Back
Top