Search results for query: *

This has been sitting on my shelf for a few years as I was going to install my 71 duster. I changed my mind and went with an automatic instead. Little surface rust from sitting on a shelf but it’s still brand new. I purchased it from AMD several years ago at $160 plus the right. I am asking $100...

I am cleaning out the garages of all my extra parts so please check out my other listings as well. I just installed new bushings five minutes ago... 1973-1976 A-Body lower control arms with the correct (anti)sway bar link tabs, ready to install. I am also selling an ADDCO front and rear sway...

Hi there. I am cleaning out the garages of all my extra parts so please check out my other listings as well. I am selling a set of rebuildable 1967 (one year only) closed chamber, big valve, big block heads along with the rockers, set of used push rods, heat shields, valve covers etc. (see...

Hi there. I am cleaning out the garages of all my extra parts so please check out my other listings as well. ***10/27/17 I just posted a set of 1973-76 lower control arms with new bushings and correct sway bar tabs under a different listing that would work awesome this this front setup*** I...

Hi there. I am cleaning out the garages of all my extra parts so please check out my other listings as well. ***10/27/17 I just posted a set of 1973-76 lower control arms with new bushings and correct sway bar tabs under a different listing that would work awesome this this front setup*** I...

I purchased this Challenger already wrecked as I was planning on building a hot rod with all of the components of the car. Car runs and drives!!!!! Air conditioning blows ice cold!!!! Everything works on this car!!!! The original owner ordered and had this car specially built for him with the...

Flathead Six Cylinder with three on the tree Gyro-matic semi-automatic transmission which translates into it being both a manual transmission as well as an automatic. This is the last year of this line that ran from 1949 to 1952 with the Business Coupe being the most highly sought after. I am...

I started this project a couple of years ago and now it needs to go, am moving in a few months. Clear title on this car. It is a 1976 Feather Duster which means it weighed 500lbs less than a standard Duster of the same year. I do not have the correct hood or front bumper (both aluminum...

Okay, so this car has a bit of history to it. What we have here is a 1952 Dodge Wayfarer Roadster or better known as the “Business Coupe”, flathead six with three on the tree Gyro-matic semi-automatic transmission which translates into it being both a manual transmission as well as an...

Up for sale is a used but in very good condition, ready to install 742 case 8.75" third member with 4.88 Mopar ring and pinion. The ring is clearly marked 4.89 (4.88), the ring is marked: "1675496 489 1 S291 4 68 MIX 2". I purchased to put on shelf but shelf is full so time to go. The ring...

Am selling this monster truck to make way for other projects... Here's the skinny on this beast: Drive train: Rebuilt 460ci engine with mild cam but more than stock cam Dual exhaust C6 automatic transmission Ford 9" open rear Holley racing electric fuel pump New Mr. Gasket fuel...

OK, I know it doesn't look like much but his little convertible is a factory four speed car. Came from the factory with a Super 225 engine which became a boat anchor as it was stored out of the car in an open barn for many years by previous owner. I took the interior out of the car for long...

Hey guys, I still have these cars and have not gotten to building on mean street machine so am putting them back up for sale. Here is the new listing on Craigslist. Http://baltimore.craigslist.org/cto/5374390725.htmlI have decided to sell my two '68 Valiants and need to proceed asap...

Up for sale is a recently rebuilt and ready to install 742 case 8.75" third member with 4.88 Mopar ring and pinion. This center section was rebuilt for previous owner but was never installed. He sold it to me as he was told that it was a 410 gear but as I pointed out to him, the ring is...

I am trying to keep the house so this must go... 1997 Car Mate enclosed trailer that I purchased in the fall of 2012, installed four NEW tires and rims, went through bearings, electric brakes. lights, battery, etc. to ensure all was in good condition then had inspected and registered. I...

I am selling off all extra parts for my hobby cars to try and keep the house a bit longer. Here is a 440 short block dated 1971 ready for rebuild. This is an internally balanced forged steel crank standard cylinder bore engine, hydraulic lifters are still in place. Casting number on side of...

I am selling off all extra parts for my hobby cars to try and keep the house a bit longer. Here is a factory replacement 318 2bbl Engine with approximately 50K miles on it. I removed it from a 1967 Plymouth Satilite recently and was going to install in a Duster that I'm building but keeping a...

Here is good condition deck lid, rot free, only slight surface rust that I removed from a'74 Dart Sport, should be same as Duster of same year as well as '75-76, not sure if it is same as '73 or not. First $40 takes it, prefer pick up, shipping costs are just too damn high. Send me a PM

Here is a very good ring and pinion for the #742 8.75" case complete with three shims. Shows little wear, nice sharp edges on ring and pinion teeth. Ring number is 2852938-3.21 7 27 87 1 D Pinion numbers is 3507915-3.23 $100 shipped to lower 48, Paypal is fine, you pay their fees. Send me...

Here is a used oil filler neck and cap used on any engine but were most popular on cop car engines for easy oil filling. Gasket is dry but might come back with silicone. Install in place of oil cap on valve cover for easier fill. $25 shipped to lower 48. Paypal is fine, you pay their fees...

Here is a great shape used set of adj. rockers, shafts, spacers and cupped end pushrods for small block engines running solid lifters and cams. $110 shipped to lower 48. I do accept Paypal, you will need to pick up their fees however. Send me a PM with interest.

I am clearing out the sheds and garages so please check out my other items for sale. Here is an automatic console in fair condition (will need restoration) for your consideration, I belive is correct for ALL A-Body cars for years 1970-72 but will fit all years from 1967-1976. What you see is...

Here is a streering column I removed from a '74 Dart Sport, this listing includes matching door and trunk locks and keys. Still cleaning out the garages and sheds, getting rid of everything... Please send me a PM Shipping (UPS Ground) will be on you and yes Paypal is fine but you will need...

Click on or cut and past link to browser for additional details http://www.ebay.com/itm/261262739453?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_637wt_1399 A-Body housing with relocated perches, SBP Axles and 10"x1.75" drum brakes w/o drums. If someone on FABO wants this, I...

I am busy getting rid of contents of sheds and garages. Here is a rear end housing out of a Plymouth/Dodge from 1964-67 B-Body cars such as Satilite, Coronet, Charger and is considered the "narrow" B-Body rear. Housing measures 54.25" as measured from the outside face of the axle tube flange...

Click on or cut and paste link for information on Ebay listing. http://www.ebay.com/itm/261253166063?item=261253166063&viewitem=&vxp=mtr#ht_372wt_1399 Or send me a PM and I will sell here and end auction early.

Click on or cut and paste link for Ebay listing http://www.ebay.com/itm/261253160248?item=261253160248&viewitem=&sspagename=ADME:L:LCA:MOTORS:1123&vxp=mtr#ht_391wt_1399 Or send me a PM and I will sell here. Sold

Sold on Ebay even though listing has not ended. Click on or cut and paste link http://www.ebay.com/itm/261250941968?item=261250941968&viewitem=&sspagename=ADME:L:LCA:MOTORS:1123&vxp=mtr#ht_345wt_1399

Click on or copy and past link for description http://www.ebay.com/itm/261250957833?item=261250957833&viewitem=&vxp=mtr#ht_345wt_1399

I have listed one of my remaining 340 engines on Ebay, please click on or copy and paste the link for description. http://www.ebay.com/itm/261250918996?item=261250918996&viewitem=&sspagename=ADME:L:LCA:MOTORS:1123&vxp=mtr#ht_799wt_1141 If you are serious about purchasing it outright, send me...