Search results for query: *

I am thinking around a 1970s

Have a nice Gas pedal that came from a dart asking $45 will ship Free from North Carolina

I will include shipping for the $125

Big Block Mopar oil pan.Milodon part # 31015 fits A,B,and E body it is an external pickup and has the pickup with it.It is 8"deep.Oil Pan new is $225 the pickup is $58 and the fitting is $55 That is $338..I will take $125 shipping is on you.It had a plug welded on the top pass. side and does not...

Mopar Big Block Milodon 7Qt.Oil Pan Part #31015 has the External Sump pickup Part #21300 that is included.Also comes with a Brand New in the box Milodon Windage Tray It was $70.It has a plug on the pass side of the pan that has been block off. Only reason for selling is it want fit in my...

B&M Flexplate part # 10231 Internal Engine Balance for an 8-Bolt crank. It is SFI 29.1 but is out of date.$65

Thanks on all the info but we have ran JW bellhousing since 1992 on mopars and chevys we have not had any problems with them also never have had to use the starter shims on the mopar either. As for the Reid Bell housing I am NOT looking for one of those first I do not have a reid case and I am...

The reid case is $2 higher than the JW Ultra bell I can get the JW Bell for $366.54 at Barnett with my IHRA membership it is $459 at Jegs But it is $410.80 at Jegs with my IHRA membership. I am just looking to see if there is a good use one around. The Reid Bell housing only works with the...

I can get a new JW bell housing that is no problem and No wait they are in stock.We have never had a problem getting them ever powerglide we had had either Mopar or straight up chevy has always had a JW Ultra Bell on them.I was just looking for a used one to save a few $$ I have try the plate...

Looking for a JW Ultra Bell for a Big Block mopar to a powerglide.

Here is your Cowl Hoods for the Duster http://www.andysautosport.com/plymouth/1970_1976_duster/exterior/hoods/fiberglass_hoods/unlimited_products/ Picture below of hood You can also check with VFN Fiberglass they do not list them but call them and they will make you one.I had them make me one...

Strange Rear End Spool Part # D1555 It is the Lite weight Steel Spool It is for a 9" Ford it is 35 Spline.Will take $145 for it includes shipping in the 48 states.

Barry Grant 400 Fuel Pump.It has less than 75 runs on it.Will Take $275

This Damper is Brand NEW still in the box. $250 includes shipping in the 48 states. This is copy from Summitracing website. At Summit it is $369 Brand:ATI Performance Products Manufacturer's Part Number:917110E Part Type:Harmonic Balancers Summit Racing Part Number:ATI-917110E...

I have a Nitrous Plate with New Solenoids and 14ft of Braided Line everthing but the Bottle & Bracket.Will take $225

I have (2) Used Turbo Action Valve Body The first one is Part#17162 It is a Cheetah Street Manual/Automatic (PRN321) '62-'64, with a foot note that reads "push button". The second one is Part #17156 It is a Manual Valve Body It is for a 66-77 Torqueflite 727, 904 (Non Lock-Up) Shift Pattern...

The max RPM is 10000

This is a Brand NEW Fan, Flex-a-Lite, Wide Blade, Clockwise, 13 in. Diameter, Stainless Steel 5 Blades/Steel Hub,It was $37.95 plus handling at Summitracing I will let it go for $25 includes shipping

1968 Dodge dart Door Hinges in very good shape No Slop and the Gas Pedal from the same 1968 Dodge dart. Will take $40 shipped.

This is a Holley HP Series Race Carb.It is part number 80514-1 it is 1000cfm.It is use and worked great.It also has a New kit just been rebuilt and has not been on a car or gas in it. It sales for $785.99 at Jegs I will let it go for $475 1000 cfm 4150 HP Carburetor Gasoline...

This is a Factory Low Gear (2.74) for a 904 Transmission it is in Great shape.Will take $75 for it includes shipping.

I was asking about this past weekend..He was not there early this year either..I think 2009 was the only one he went to with it...He lives in Greensbro..I live in Maxton N.C. only 40 mins. from Rockingham dragway.I had less than 500 miles on it when I sold it.. The only thing I have seen he did...

I did not get to make it had to work.Was The this car at the show.I sold it in 2009 right before the Mopar at the rock that year and the guy won Best A-Body and the Ronnie sox cup award.He also made it in Mopar Muscle Front cover and centerfold that year.

Cheetah Street Manual/Automatic (PRN321) '62-'64, "push button Trans. Does have the Good filter on it to. Will take $150 includes shipping.

This is a set of Roller Lifters for a Big Block Mopar 14 are the same and 2 of them are different.They where in a 440 motor that broke a rod.They are in good shape and would make some good spares.Will take $150 includes shipping.

This is a set of Roller Lifters for a Big Block Mopar 14 are the same and 2 of them are different.They where in a motor that broke a rod.They are in good shape and would make some good spares.Will take $150 includes shipping.

This is a Holley Carb. Part #4779 750 Double Pumper.It has Jet Extensions 4 corner idle.This carb was on a 406 Chevy in a 3000 lbs car and ran 6.40s..This is a gas Carb. will take $275 includes shipping.

This is an 8" Converter with Turbo splines for a Powerglide from JW Transmission it was behind a 451ci Dodge motor in a Dragster and stall 5000 to 5400 it has around 20 to 30 runs on it.The dragster ran 5.16 in the 1/8 mile.Car was sold then sold motor still have Converter left. Will take $400...

Sold Thanks Used MSD Pro Billet Distributor part # 8536 for Big Block Mopar 440 also has the Accel 300+ 8.8 Race Plug Wires. Everthing works Great came out of a Duster running 5.80s in the 1/8 mile. $280 includes Ship

This is a set of Door Hinges from a 1968 Dodge dart they are in Great shape and does not have any loose pins. $40 Also have the Gas Pedal from the same dodge dart in Great shape $25 Ship for Free