Search results for query: *

Thanks ...thats what i needed

Does anyone have a pic of the inner fender splash shield that mound directly behind the front wheels of a 69 dodge dart. Trying to figure out what screws and washers that are needed. Thanks

I am putting dual exhaust on my 69 dart and the driver's side brake hose is getting in the way. I have got the tailpipe in but it's up against the brake hose and I mean tight. It is the 12-inch brake hose the goes onto the brass axle tee block that is in the way. Does anyone have a pic of there...

Hope you guys can help, put the door panels on for the 69 dart and the drivers door armrest will not attached with the screws ....does not have a threated insert. From what I can see, it is just a round hole and the screw goes right through. The door was from a 70 or 71. Can anyone chime in if...

What problems would i encounter switching from a 5.2 magnum to 5.6 magnum engine in a 96 dodge ram 1500. Do I need to swap wiring harness or ecu box. Any help would be appreciated

DP-80

I made a set that is higher than normal. The fronts bolt using existing holes and bolts from front bumper brackets and the rear bolt to rear spring bracket holes. Fronts have holes so I can bolt a long square tubing to lift front up and was able to slide engine, tranny and complete front...

Would be tight on one side ...so I stayed with a 245 to be safe

6 inch rims

I tried 215 70 15 on my 69 dart and they did catch the front of tje fender. ...the 205 60 15 worked great

Have the 245-60-15 on back and they fit great. The front is 205-60-15 on 15 x 6 rims and has a slight rake ....worked out exactly how I wanted to look.

Are the seat covers from legenday and how much for just the seat covers

Using iron x heads ... why are they only for alum. heads. I did not want to put anything in their that might damage or plug up the new stroker engine

Bought a 22" restored rad from a member here that was suppose to be brand new. Still have a hang tag showing mopar number and size. I installed it and filled it with fluids and sat for 3 days and was ok. Got engine all hooked up and started it and ran for 20 minutes. Next day I noticed a 1"...

Ok thanks alot guys ...wiring is finally done on the dart ...moving on to the door glass and carpeting and seats and she will be done. I did go exhange the 5-wire to a 4 wire relay and got her wired up. Did the following... 30 - Power from alternator ...Large stud 85 - Spiced to blue feed from...

If you can build a set of these for 40 bucks ...call me ...lol. I think maybe some material ...but labour ...time ...powder coating ....never come close

Here is a link to their page describing the ones for the abody. Tubular subframe connectors A-body Mopar

Todays shot ...Mounted and all wired up ....and all the gauges work along with the new led lights ....only 2 attempts to get it all wired right ...one bad LED e-brake light )brand new and speedometer did not work at first ...that was a ' my bad ' .All thats left is to put the ashtray in, finish...

Now body filled the groves, primed, painted and satin clear on complete unit

Here is mine

Does it matter which 87 tab on the relay I use and would it be better to run a separate blue wire from the relay to the alternator or just splice into the existing wire. Oh and thanks for the quick reply 67Dart273

Can he leave the existing Black/Red wire that feeds the fuse box/light switch/ignition ...and just run a heavier red wire from the alternator to the battery with a appropriate fuse or breaker just before the battery.

Final step in rewiring entire car .... can someone confirm this relay setup for a Choke. Please dont give me any other ways as I want to run a relay and want the choke dead in acc. and not heating up. Cannot do the oil pressure set up. Thanks guys

With plastic ...I also used the adhesive promoter from eastwood and the rat rod black. Just make sure when you spray the promoter on the plastic .... you have a short window before you have to spray the finish coat on it. Don't wait to long after applying the promoter on it

Eastwood also makes a silver argent that sprays on nice, just make sure you do it in light coats

Has anyone used there new subframe connectors that bolt to the frame and the rear leaf mount.

OK ...thanks alot guys ...ordered the 15x7 with the 4.25 backset for the front that will have the BFG 205-60-15 and the rears will stay 15x7 also with the 245-60-15.

Hey Guys ...after waiting 12 weeks for rims from local dealer ...going to order from summit but they do not have the 15x6 rims. i am going with the crager magnum 510. The rear will be 245-60-15 BFG on the crager 15x7 rims and the tires on front are 205-60-15. The car is a 69 Dart with the 11.75...

Where can I tap in the choke wire under the dash. I was thinking to splice it in the cig.lighter wire but can both work at the same time. Or would splicing into the radio wire .... was worried it may cause static in the radio or noise. Any other suggestions would be great as long as it connects...

Can anyone here decipher the codes on a 727. Would like to know what its from, this is what I found on case pk2801541j 2282 0648 2801261 DP 8 OD