Search results for query: *

For Sale: Plastic clamshell glove box liner removed from a 1976 Duster. No cracks or damage. $30 plus shipping.

Selling my 1973 four-door Dart. Motor is a '72 225. Auto transmission on the column. Brand new fuel tank, sending unit, tank pad, filler seal, and trunk floor boot. Fresh oil change, new coolant. New poly motor mounts. Slot mag wheels. Including new upper and lower MOOG ball joints. Big bolt...

.

Hello all, I am in need of a good running 225 slanty for my 1973 Dart. Current motor threw a rod bearing, and I am hoping I can find a good used one on the cheap. Building this car on a VERY tight budget. Doesn't need to have carburetor, I have a good one. I am located just south-east of...

I need a full set of fender emblems for my 1973 Dart sedan. Driver quality, doesn't need to be anything special. Thanks!

My car is missing the headliner, so anything is an improvement. Need a green headliner for 1973 Dart Sedan, would prefer in Cincy area to save on shipping. Thanks!

In need of the black rubber trunk seal that surrounds the fuel tank fill tube. Need the sheet metal bezel ring as well. Must fit 1973 Dart. Thanks!

For Sale: (2) Small-Bolt-Pattern Steel Wheels with 90% 215/70R14 Multi-Mile Tires Fresh balance, no torn-up lug holes. No longer have a SBP car so my loss is your gain. Asking $100 Cash Local pickup only. I am located 30 miles SE of Cincinnati. Thanks for looking, and thanks FABO!

Hey guys. Long time, no post! Anyway, I have lines on a cool 1971 Duster. Slant six, column 3spd, manual everything-my dream car. It is sitting in a backyard a few houses away from me, and has been there for a few years. I pass it every day going to work, and it is killing me to see it sit. I...

For Sale: 1972 Dodge Dart Swinger 225 Slant Six, Column 904 Automatic, 7-1/4" Open Rear-End Runs good, 1bbl carb was recently rebuilt. F8-Green Exterior, Green Interior w/ Split Bench Black 14" Rallye Wheels, Center Caps & Trim Rings for Fronts Only Front & Rear 9" Manual Drum Brakes...

So my boss at work has this old '70s Montesa dirt bike sitting in a back shop. (I found it by accident.) He offered to sell it for like 4 or 5 hundred bucks, but it needs some parts. The kickstart lever it missing, it need new cables, and a chain as far as I know. It does run, another guy at...

I recently got ahold of a 2852905 casting 8-1/4" rear end. It is complete with a 3:21 gear ratio, and is exactly what I want for the Dart. Unfortunately I didn't measure correctly, and took the guys word that it was for an A-Body. (He owned a Satellite, and must not have known.) Based on what...

So I am getting a complete 3spd-on-the-tree setup here soon. I will get the tranny, linkages, driveshaft (for a 7-1/4"), cross-member, bellhousing, and everything else except maybe the column. I have all the 4spd-on-the-floor parts out of a Duster (Z-Bar, pedals). Will this stuff all...

I have a set of M-Body disc brake Upper Control Arms. Got them for free when I bought my disc brake spindles. FREE!! :toothy10: You pay shipping. Don't need them, but I thought somebody else might.

Anybody heard about this? S-K Tools filed for bankruptcy a few days ago, and is going to be bought by another company. Hope they don't get sent to China like Vise-Grip. I have grown up using my Dad's OLDER Craftsman, Snap-On, S-K, and Armstrong tools, and I have always loved the S-K's. I was...

So today I finally realized my Bro isn't going to finish my floor pan job (not that I ever thought he would), but I really need them replaced. One has been cut out and the new one is tacked in (passenger), but hasn't been seal welded, and the front firewall lip is really torn up (long story)...

For Sale: Two 15x8.5" aluminum slot mag wheels. Uni-Lug bolt pattern fits Ford, MoPar, and GM. Unknown brand, maybe Ansen's?? $100 for the pair. Located in South-Western Ohio, pickup only. Cash payment only on pickup, includes lug nuts & washers.

I have a C-Body 8-3/4" housing. Has been media-blasted and heavily primed. Includes a set of tapered axles; loose in housing. Perfect for narrowing for a drag car. CENTER SECTION HAS BEEN SOLD! I would like $100 or will trade for a complete A-Body 8-1/4" rear end. Gears don't matter. Must be...

I am looking for an old school under-dash FM converter box or a 8-track player. Must have wiring! I plan to use it in my Dart. Must be in working condition. Will trade stuff off my '76 or '73 Duster parts cars in this thread: http://www.forabodiesonly.com/mopar/showthread.php?t=105473

I have decided to go ahead and part these two cars. One is a '73 GOLD Duster, and the other is a '76 Feather Duster. The '73 is a 225 slant six, column 904 auto, 7-1/4" rear end, manual front and rear SBP drum brakes, and rusted out floors. The interior is pretty much gone, but I have the seats...

I am looking for a set of vintage traction bars designed for MoPars. Not interested in "universal" type bars. I need a set that bolt to the bottom of the leaf spring pack and replace the shock plate. Important! I need a set like those pictured that have the "safety hanger" behind the axle pad...

These are the bumper guards off my 1972 Dart. Rubber is in okay condition, some cracks. Chrome is pitted, but not horribly. "Driver" condition I guess. Includes mounting bolts. Make me an offer, or I will trade for an Accel Super Coil (boxy type coil) or a vintage working 8-track player...

I have been looking everywhere for a vintage "under dash" style 8-track deck to put in my Dart. All of them on eBay are either WAY expensive, or are missing their wiring (I plan to hook it up and use it. My dad has a big box of 8-tracks in the attic. :-D Get The Knack included.) Anybody have...

So a local junkyard has a '85 Dodge truck with a 360 under the hood. They want $150, but it has been sitting forever without an intake. It rotates freely and has good compression, but that is really all I know. Should I grab it before they crush the truck sometime next week? I really don't have...

So here soon I am going to get a 3-speed manual transmission out of a '71 slant six Duster. I have all the manual transmission stuff (pedals, Z-Bar, etc.) in the 4spd '76, so that isn't a problem. (He is getting the 4spd in trade.) What is is that this transmission is a 3-on-the-tree 3spd. I...

For Sale: C-Body 8-3/4" housing and axles. Has been media-blasted and primed. Axles are loose in housing. $150 489 case with 2.76 gears and open differential. Includes a pinion snubber. $150 May consider trade for a complete A-Body or 1965-1967 B-Body 8-3/4" rear end. Located in...

So since I am getting two Dusters this week, I am already thinking about what I need to get the '76 running again. It ran when he bought it, but hasn't for a good amount of time. So here is what I think I need: New Distributor Cap & Rotor New Spark Plugs & Wires Change Oil & Filter (Once...

Here are the Duster brothers I have mentioned a few times. Hopefully sometime this week I will be getting the '76, and later get the '73. Lowdown: Found these while pursuing a black 1972 Duster parked at a nearby house. Turns out the guy who owned that car also owned these. They were meant to...

Recently I picked up a 8-3/4" rear end setup out of a early-70's Polara. I took the center section, and am going to sell the rest. The housing has been sandblasted and primed. Axles are tapered unfortunately. How much would this thing be worth? It is in great condition. I was going to use it...

So me and my dad are going junkyard hunting tomorrow. A place downtown has a '88 5th Avenue (M-Body) that I am going to grab the disc brake parts off of for my Dart. This is the first time I have ever gone to a pull-it-yourself yard, and I am sorta excited. Any tips as to things to do or not...