Search results for query: *

Not too much to ask, but the budget is $30k. Must be FC7, 340 and a 4 speed. Anyone on the forum parting with one? PM me with pics, price, location and details.

prefer a finished car, not a project. Numbers matching is a plus, but you already knew that. Can't hurt to ask around. PM me if you have a car you may want to part with.

Has original paint markings from when it was new if you are into that. 3.55 ratio, 489 case. Run as is, or fully restore it depending on your needs Located in Poway, CA 92064 $1250

Looking for late fall of 69-April 1st 1970. Dual field, single pulley roundback. Anyone have something squirreled away they can share with a fellow who is down on his luck trying to find one for a high level resto?

with B7 interior. Fender tag. Numbers matching engine. New transmission from Passon (with receipt). Original numbers case included. Driver quality paint shows well, but has some tiny bubbles on the driver's quarter. Rallye wheels and newer BFG Radial Tires with about 1000 miles on them...

I have seen this car in person, and it is stunning. The current owner is a long-time owner and a really nice guy. It is non-numbers matching, but it is a rare one for sure. 1968 Dart GTS 383 Conv.

Listed out on eBay. --- 1969 Dodge Dart 2 Door | eBay 1969 Dodge Dart - Original Slant 6 Car Y2 car with X9 interior, column auto. Currently has a 383 with holley carb, Torker single plane intake, orange dual snorkel air cleaner, Schumacher mounts, mild cam, with cast iron manifolds that...

Been a while since I have posted. Sorry I have been so busy. Looking for 69 'cuda VIN/SPD/order number info. Anyone have one higher than 434097/SPD 701/order number 075214? I have searched the registry info I have gathered, but have not found one.

whats does it look like in 1969 or 1970?

Out on eBay right now with a $7500 BIN and a $5000 starting bid 1969 Plymouth Barracuda | eBay What I am offering up for sale is a 1969 Barracuda Notchback. What I can tell you is that it has a numbers matching 318 engine 2 BBL carb and numbers matching column shifted 904 transmission...

I just wanted to say that Scott Smith at Harms Auto is one of the good guys. I sent him a crudded up ol' 4618S core that was ROUGH to say the least. He sent it back and it is a jewel. He would be one of the only ones I would trust to do a factory AVS resto. Not sure if he comes on this site...

Not that some of these are specific to a 440 'cuda, but the car deserves the best correct parts. Here is the list: Straight front license plate bracket and mounting hardware Hi and Low Horn Assemblies with brackets and mounting hardware that function! 2949065 Radiator (longshot) Correct...

Original Mopar A Body 340 Radiator Part Number 2949066 Auto or Manual Trans Date code: 160 9 Part number: 2949066 Holds water, but I would have it recored. Asking $360 OBO plus shipping to your US address.

Congrats to Steve (autoxcuda) and the rest of his crew for putting on another stellar event! There were so many fresh, new cars, quite a few of the usual suspects, and I got to met a couple of members (jim lusk, cuda_dad and others). I was fortunate to take Third Place 67-76 A Body stock...

Originally purchased as spares. These are in EXCELLENT overall restored shape. The chrome on the surrounds is excellent, they have been restored in black for your Formula S. They have the supports for the directionals, the eggcrates are complete, and they come with headlight trim rings. I...

E body opportunity has led to putting both of my cars up for grabs, but this is no fire sale. I spent quite some time looking for both of these cars, and you will not likely find a comp for either one in the near future. I also know this is not the BEST time to sell a car, but here we go...

E body opportunity has led to putting both of my cars up for grabs, but this is no fire sale. I spent quite some time looking for both of these cars, and you will not likely find a comp for either one in the near future. I also know this is not the BEST time to sell a car, but here we go: 1...

Yes, I know I can get one from Glen Ray, but I want to see what the Mopar hoarders have out there.... PM me if you have a decent one, and might be willing to part with it. The date code would be a help as well.

Rust Free Trunk Lid Front License plate bracket Underhood horn assembly Short reverse tail lights not pitted Trunk finish panel with no missing studs, dents and with OG hardware Green Seat Hinge Covers 4 Plymouth Division Hubcaps for 14 inch wheel barracudakid, what do you have? More...

Hey all! I am back up a running and hope to post more and continue to learn from this incredible community. I am looking to start a "one stop shopping" thread regarding the 1969 440 'cuda. Here is what I am after: Reference Pictures Documentation Historical Paperwork or Corporate...

Not sure of the impact or if this has be addresses in another thread, but Axion Power (aka Turbostart) is no longer making their restoration series battery. Sad day. I hate to see good products go by the wayside. Lord knows we need all the help we can get in support from the aftermarket...

I am looking for a matched set in great condition of SBP 14x5.5in steel wheels. I know someone out there has a matched set that came off of a 69 car, and are just laying around. Let's put them to good use. Also, let me know what the date code is if you can read it (by the valve stem hole)...

I just wanted to share it here before they hit eBay tomorrow at 10am PST. I figured I might as well let you all know that the time has come to likely part with one or both of my cars. One you all know about, my 340 convertible, but I also have a 440 'cuda notchback that I purchased and tried...

First, let me congratulate HemiMark on his phenomenal 68 Hemi Barracuda feature in this month's Mopar Action. The story is fantastic. I am going to re-read it again and again, and I have always loved that car since the great eBay score... As a footnote, yours truly got a mention in the...

http://www.cpwclub.com/fallevents/fall-fling-event/ Not sure if autoxcuda has started a thread here, but I know there is one on another Mopar site, so I figured I would take the plunge and ask the question, "Who's Going?" Looks like I am going to be able to make it this year, and though I...

I know it might be a stretch, but if you own the following VIN, PM me with proof, and I will pass along the original owner's manual for that car. Car was delivered on Sept 19, 1968, so it would be an early production 69 Notch. BH23P9B105107 Shane

Edelbrock Torker 440 aluminum intake. Thread holes look good intake just needs a light cleaning to be good as new. $100 bucks shipped. PayPal or money order.

Good afternoon all! I have been working for a while to try and get a 340 and 383 registry off of the ground as a compliment to the 440 registry that BB-Dave has. Most of what I have thusfar has been information that I have gathered over some time, and I think I am at a point where I should be...

Will clean up nice. Fit right on a set of 906 heads with no issues, though will need some time and cleaning to be perfect. Picture below shows a clean spot I made with Mothers Aluminum Polish and 2 minutes, or you can send to CudaChick for her awesome powdercoatings. Asking $100 plus the...

Asking $250 plus the ride from San Diego, CA. PayPal is great, and money order works as well. P/N L2315 F for pistons: Flat top thermal coating on skirts NIB E-233K for Ring Kit NIB as well These would be a great addition to your 383 with the rods I have listed at this link...