Search results for query: *

I sold my car for a major loss -- too much body work needed by me. So now selling off my remaining parts for a cheap price for all. Please look at at on Craigslist, prefer local pick up, don't want to deal with shipping, that's why parts are cheap if you buy them all. Thanks...

Sold

http://worcester.craigslist.org/cto/3945389600.html

Here's a good one hope someone can help me with. Got a 67 Dart with the Orange Mopar electonic ignition on it. Always have had trouble with no spark sometimes starting it - both with the 273 it had and now the 360. Put in a rebuilt distributor from Autozone - ran fine for a while. Pulled the...

So I bought my 67 Dart GT with a supposedly rebuilt 273 Hi-Po a couple of years ago. It never seemed to run right so pulled the motor and put in a 4 bbl 360 from a motor home. Was told the "professional" that rebuilt the 273 put in 60 over pistons and cammed it up. SO - I got the idea of taking...

Looking for a good set of heads to go on my 360 that have been ported and hopefully have a set of springs that will work with Comp Cam 268H. Would like the 2.02 and 1.60 valves - possibly milled also -- Looking for local area first due to shipping costs.

Can I upgrade a 67 904 that has the 18 spline input shaft to the larger non lock up 904s?? Long story short, I pulled my 67 273 with 904 and replaced with a 83 360 and newer non lock up 904 with a 2500 stall torque converter for the 360. The newer 904 slips going into 3rd and from ealier tread...

Need a 67 Dart Working Wiper Motor or some sort of Replacement

I'm not up to date on transmission issues. Have a 904 with 2400 stall convertor on 360 recently installed. When it goes into drive(3rd) it revs up as it goes in, shifts solid from 1st to 2nd. Changed the fluid and filter last week and it still does it. Any ideas out there???

Got a used 904 with a 2400 stall torque convertor off someone a while back and found one of the bolt holes for the torque convertor is stripped. Bolts look to be a fine thread 7/16". I gather the best way to repair this is to tap it out to a larger size? Anbody have thoughts on this? Think the...

Getting ready to replace my headliner and just noticed prices have gone up considerably since last year. Anyone know the best place to buy one from? Thought they all use to be around $75 but the ones at Legondary are now $125 - $180. Am assuming all the headliners come with tails attached for...

Bought a used 360 out of a motor home a few weeks ago. Been looking at Summit Racing web site on pistons. Anybody know what the piston head volume is on a stock 360? Can't find that info anywhere.

Just bought a used 360 out of as motor home and was checking things out. The heads are casting 4027569 - noticed that it has 2 valve springs per valve. Is this normal? Went out to Rock Auto Parts and they only show single springs. Just wondering if the heads were redone when it was rebuilt and...

OK, I bought this 360 and the guy I bought it off of says one of the exahust bolts has water coming out of it if you don't tighten it down really good. I found one posting on this web site that says all small block mopars will leak water out of the exhaust manifold bolts - is this true? All I...

OK, I've read quite a bit about this and it's a bit confusing according to what web site you go to. First off, I was going to upgrade my 273 to a 318 but found a rebuilt 360 with a rebuilt 904 automatic and 2500 torque convertor. It came with no flywheel and the person I bought it off of says...

Can anybody with a 273 HiPo tell me what kind of compression readings their getting? I have a 67 273 HiPo that was supposedly rebuilt before I bought it and I only get 110psi reading on all cylinders weather warm or cold with throttle open. Supposedly it was bored 30 over and also it now has a...

Let all be warned about ordering parts from Jimsautoparts.com. I've ordered other parts from them before without any issues. I just ordered some clips for my heater box and 1st problem was the lady taking the order on the phone said they had a $30 minimum(not mentioned on their web site). So I...

I have a 67 Dart with the 273 HiPo and 904 automatic, anyone know what would be involved with swapping out the motor to a 84 318? Think the engine mounts are the same but what about the flywheel, flexplate, and exhaust manifolds or any other items??? Found a 84 318 engine someone wants to sell...

Anyone have a good working driver's side rear seat window regulator for a 67 Dart GT?

Doing some planning for my 67 Dart GT Auto with 273 HiPo down the line. Currently has 2" dual exhaust with stock manifolds. With this small of a motor can I get any extra HP with some other type exhaust manifold or headers? From what I have read I'm a bit confused on the different stock...

Got a 67 Dart GT 6 months ago with the 273 Hipo that was supposedly rebuilt with hydraulic cam installed. Also has the Mopar electronic distributor. Anyway, tried timing and the timing jumps around some. I pulled the distributor and noticed I have some slop between the distributor gear and the...

I have a 67 Dart GT and I upgraded the front drum brakes with upper control arms and disk brakes from a 75 Dart Sport. My wheels stick out a little more now than before which I knew about. When I go to get a wheel alignment - should they use the same numbers for caster/camber/tow as my original...

Getting ready to install 1406 Carb on 67 Dart 273 Commando. It has the old style linkage and it doesn't line up correctly, looking for new style used on newer SBs that uses two of the bolts that hold the intake manifold on.

I bought a model 237 am radio for my 67 Dart. Need the 2 nuts that hold radio to dash - can't believe I can't find these locally.

Anyone ever repaired a radio bezel? Mine is the 67 heater/radio bezel(deluxe) which has preformed holes for the knobs. Previous owner had cut out the center strip out between the pushbuttons and display so they could install an am/fm cassette deck. Would like to get it back to original look with...

Anyone have a good interior rear view mirror for a 67 Dart GT they want to get rid of? Mine is pretty beat. Can't find any reproductions anywhere, if you know of a site please let me know.

Getting ready to have my front buckets redone. Already ordered the seat covers and foam. While I'm having it done is it possible to add headrests? If so, anyone know of a web site where I could buy all the pieces needed?

I am converting my 67 Dart from drum to disk brakes. I got Disk brakes and upper control arms from a 75 Dart. Had to put calipers on the back side because they hit the sway bar when on the front. Bought new disk brake hoses for a 75 Dart but they won't work. Anybody have a solution? Also...

I broke the driver's side tail light lense.

Converting over to large bolt pattern on my 67 Dart Gt. It came with the 8 3/4" rear end, need correct axles. Can buy new from Moser(sp) but looking for cheaper used ones first.