Search results for query: *

Hello The motor is a stock 1970 318. I see comp cams has a kit with the cam, lifters, springs, etc as a matched kit. My question is, can this installation be done with the heads still on the car or would machine work be required to install the springs or seals? the kit is...

Hello With money being tight right now does this plan make sense to do. Car is 70 dart 4 speed 3.55 gears. Stock 318 small valve heads, stock exhaust manifolds. we have an edelbrock performer manifold and 600cfm carb and dual exhaust on it now. Question is, until we can do something with...

Hello Looks like we got a power steering leak on the steering box. I see that napa has reman unit. Thinking of replacing it and the hoses. What is involved in replacing the box, will it come out without lifting the engine? Anyone got any steps or advice. thank you

Hello All Trying to get a parts list together for this project. Since it's an old engine all the gaskets and seals are going to get replaced. Which brings me to my questions. I think the intake manifold must be the magnum type, are there any others that are mag instead of LA? Do you all...

Hello, Here is my 1970 dart, if I loaded the photos properly:) It is a 39k mile car. It just got upgraded to a 4 speed and 3.55 gear 8 3/4 rear end. We are cleaning up some details on the under side now. After that we hope to add magnum heads and a new cam to wake up the 318 it has. thanks

Hello, Still trying to decide whether to use the 340 hi perf exhaust manifolds or the hooker 5901 headers I have for my 318. It will have magnum heads and its a 4 speed power steering dart. What size headpipes can be used with the 340 manifolds and does someone sell them mandrel bent that fit...

Hello All, Car is a 39k mile 70 dart with 318, 4 speed,3.55 8 3/4 suregrip, and is used for cruise nights and weekend driving. I would like to do some low dollar upgrades on the 318. This is a "for now" motor and later on we'll build a 360 or stroker with a block I have. Here is a list of...

Hello Got an a body 8 3/4 with 489 case and 3.55 gears. I replaced the inner seals and put in new gaskets. I didn't check to see if end play was adjusted before I took it apart. I can't get there to be any play at all. No matter which was adjuster is turned it seems to bind up. If I loosed...

hello all For a 489 8 3/4 suregrip rear end assembly what gear oil and additive, as well as how much of the additive should be used. The local autozone has a product called trans-x posi-trac which says on the label is equivalent to chrysler #4318060. thanks

Can the tailshaft seal be replaced on an A body 833 with the tranny still together? thanks