Search results for query: *

  1. D

    Awesome A-body air dam for under $30!

    Anyone got a picture of a front air dam mounted on a 71 Demon? If so, where did you get it?
  2. D

    Aluminum cylinder heads

    Hughes Engines has nice rockers arms. Second the Smith Brothers on pushrods
  3. D

    1971 Demon Headliner Sail Panels

    I'm not pushing Classic Industries, but I just got a set uncovered for 20.00 Covered I think were 40, could be wrong.
  4. D

    72 Scamp rear sail panel boards

    Try Classic Industries?
  5. D

    Front Side Marker

    If its like a 71 Demon, which I would imagine it is, you have to undo the 2 nuts on the back of the light inside the fender. Take the light off the fender, undo the 2 screws on the back, Phillips head, the amber lense comes off the front of the light, then just twist the light bulb out of its...
  6. D

    Tunnel Ram on a 383

    Use 600 cfm with vacuum secondaries. Use 2 carbs, not one, flow is better. They arent that hard to tune. Get a WB and ask questions.
  7. D

    Awesome shock plates

    I know they make those, but that is another plate and 4 more nuts per side. Just an idea, nothing more.
  8. D

    Awesome shock plates

    You could weld an attachment on these for a rachet strap hook. Would make it easy to tie the car down in the back. Just thinking out loud here. Nice work.
  9. D

    71 demon windshield

    Give me about an hour or so and I can get you the pictures you guys need. All I can go by is, I got new clips from Classic industries and they match up with what I took off the car.
  10. D

    71 demon windshield

    The holes should be already drilled, Im assuming it had the clips before? If not, if you wait another 2 weeks I can take pictures on mine, it is at the paint shop right now.
  11. D

    Who sells Gen 2 Hemi engines these days?

    Bob George Racing, Eighty Four, PA, just south of Pittsburg. If I was having one built, they would be the ones. Great guys to deal with.
  12. D

    Caliper info

    It might just be the angle of the picture, but that brake line looks like it will hit the upper control arm when you turn the wheel. I would check that. I would have to go back to the garage and look at mine, but I dont recall that line looking like that.
  13. D

    direct connection style spoiler

    Did anything become of these rear spoilers? Or anybody know where you can get a fiberglass one like it?
  14. D

    [WANTED] 71 Demon deck lid brackets or arms

    Not sure what other years will fit, but I'm looking for the 2 arms that bolt to the deck lid and go up under the rear shelf. Dont need the parts that go on the inner wheelwells, just the arms. Thanks
  15. D

    70-76 Demon,Dart sport,Duster Pictorial History

    My Demon, not sure if this is going to start a war, not going back to reread the thread, but I put a twin snorkle, factory hood scoop on the car. The underside of the hood had the template of the holes for the hoodscoop drilled in the braces. Also, the car had been hit in the rear and...
  16. D

    70-76 Demon,Dart sport,Duster Pictorial History

    My car was a 318, 3 on the floor with a 8.75 rear.
  17. D

    70-76 Demon,Dart sport,Duster Pictorial History

    I know this is an old thread, but I also have a 71 Demon, I am the second owner, I bought it used in the fall of 1971 that has these same side stripes. Car was bought in MD. I have never seen another car with these stripes except this one. ANy idea if these stripes can be had anywhere? Car...
  18. D

    B intake on a RB

    There is a guy on EBAY, that makes the spacers to do what you are asking. Cant recall his name, might have his number somewhere if you decide to do this. They come in standard or max wedge ports.
  19. D

    part number on mopar m1 tunnel ram for 440?

    Measure across the flanges at the front bolt hole. That will tell if it fits a B or an RB block. That is what I did when I got a manifold at Carlisle
  20. D

    Fitting it all BB??

    Not sure it will give you enough room for the coil, but one of the fitting companies make a shorter fitting to go into the carb. I think I saw it in Jegs catalog.
  21. D

    Tunnel ram linkage

    Mine are sideways, but I got my linkage from Barnette Performance off of ebay. Way cheaper than the other linkages and is very good quality. Enderle makes it. Not what you are needing, but for other guys.
  22. D

    Adjusting float with electric fuel pump

    Did it backfire thru the carb? If so, check the power valve, it could have blown it. I believe that will also cause fuel to be sucked out of the boosters.
  23. D

    firecore distributor issues

    Call Rick at Firecore. I had bought one of the first that were produced and it had a problem with the reluctor, wasn't pinned in right. Mine sat in a box for a year as well. I called Rick, he sent me a new one, no charge. I put it in and it runs fine. Just call Rick and talk to him, no one...
  24. D

    big block pro comp heads

    I don't know where you heard that, but I wouldn't listen to them on any other suggestions.
  25. D

    Spark Plugs and Anti-Seize - What kind to use?

    I have to agree with everyone here, but when this question was asked on another site, most of the answers were not to use anti seize as this will happen and that will happen. I find it funny that 2 different sites have 2 different answers.
  26. D

    440 Intake Valley cover mounting plates

    Go to Home Depot and get a piece of flat metal, cut to size, mark the holes and drill it. Unless you are worried about being 100% correct.
  27. D

    What size electric fan?

    Thought it was said the motor was offset? I have a Jeep Cherokee fan on mine. It works okay, but I have to put a shroud on it, the fan didn't come with a shroud. It does pull alot of air. I believe I don't have my timing set right yet and it does start to get hot idling. I have to put...
  28. D

    CPPA headers

    I have those same headers and yes you have to cut some of the inner fender out and no I don't think they will fit PS. I don't have P/S, but I don't think there is room for them, mine are 2" diameter, but I don't think that will make a difference. For what it is worth, they fit very tight up...
Back
Top