Search results for query: *

  1. Longgone

    My pleasure Schwinger, glad it helped.

    My pleasure Schwinger, glad it helped.
  2. Longgone

    [FOR SALE] For Sale- 4 American Racing 200S wheels w/tires

    For sale are a set of 4 Aluminum American Racing wheels model S-200 with BF Goodrich Radial T/A tires. Two wheels are 15 x 7 and 3.75" back spacing with 275/60-15 BF Goodrich radial T/A tires, two others are 15 x 6 and 3.25" back spacing with 215/70-15 BF Goodrich Radial TA tires. The bolt...
  3. Longgone

    Keisler Engineering Filed for Bankruptcy

    I guess I'm one of the few people that actually bought one of the 5 speed kits. I had no problems during installation and have had no issues with the transmission or any related components. Keisler's customer service at the time was great, work was done promptly, and support was courteous and...
  4. Longgone

    Keisler Engineering Filed for Bankruptcy

    I received an e-mail from Keisler Engineering today. They are filing for bankruptcy. The e-mail reads like this: Dear JOHN Last Thursday January 16, I ceased operations of Keisler Engineering Inc by filing it into a Chapter 7 Liquidation Bankruptcy. This was a sad...
  5. Longgone

    Grand-Spaulding Dodge - Mr Norm's

    Quite proud of that cam, huh? Cool ad, thanks for sharing.
  6. Longgone

    Proportioning Valve Problems

    Today I replaced the rear brake hose and PROBLEM SOLVED. The hose on the car(which was replaced around 2005) was blocked. Upon removal I was just able to get air to go through it. After repeatedly trying to clear the line with compressed air eventually no air would pass through it. It definitely...
  7. Longgone

    Proportioning Valve Problems

    Thanks Redfish, I'm all ears guys.
  8. Longgone

    Proportioning Valve Problems

    It got a new one back in `05-ish but most of this "new" stuff is not worth dirt, so it may have already lived its life.
  9. Longgone

    Proportioning Valve Problems

    I'm resurrecting this old thread because I cranked up the car the other day and it is doing exactly what the OP described here. I've done the same thing as far as bleeding the pressure off. Before I do anything with the car I would love to hear some opinions as to what you guys think might be...
  10. Longgone

    20 Muscle Cars That Made History

    No Corvette?
  11. Longgone

    Show Your Big Block A body!

    Cool; hemi, manual trans., OD and A/C. What could be better? :D
  12. Longgone

    WTB rallye dash circuit board

    Thank you, I bought one from Eddie but your method for repairing the boards is excellent, I'm anxious to give it a go.
  13. Longgone

    WTB rallye dash circuit board

    Now that would make a nice fix! Excellent info! :sign7:
  14. Longgone

    WTB rallye dash circuit board

    Thanks, I definitely want an original part. If I get another I might spend a little time trying a fix at the old one.
  15. Longgone

    WTB rallye dash circuit board

    The one I have has been repaired several times, I am definitely ready for something with the pins all in their original unmolested condition.
  16. Longgone

    WTB rallye dash circuit board

    WTB 67-69 rallye dash main circuit board. Please pm me here if you have one. Thanks- John
  17. Longgone

    The 440 Club

    I can't find the company I got the covers from however I understand 440source.com is now selling these so check `em out.
  18. Longgone

    The 440 Club

    I don't remember now but I do know it was a company that dealt mostly in truck parts. I'll research and see if I can find the the name of the place.
  19. Longgone

    The 440 Club

    I will try to dig up something more current and a wider view but here's the shot from my garage- the block as it sits-
  20. Longgone

    The 440 Club

    Most of the time if you run the original stamped valve covers there is no interference problems with the heater motor. Check your engine for the correct orientation front to back. If you do run into interference problems there is a mod you can do to offset the heater motor. You can find it here...
  21. Longgone

    The 440 Club

    Check out Schumacher http://www.engine-swaps.com/ for your Mopar engine swap needs. Mounts and headers are what they specialize in.
  22. Longgone

    Using mustang rotors for 4.5" bc

    I'm glad to see you guys taking this modification and expounding on it. Cutting the seal to match the original diameter is great. Please continue to add your ideas.
  23. Longgone

    Using mustang rotors for 4.5" bc

    Yes that could be done but I think it's just easier and less time consuming for the machinist to tap straight down into the hub to create the new race seat. Yup Bob, at $300.00 that machinist you found must be quite proud of his work.
  24. Longgone

    Advice Needed - Can't Start Rebuilt 273

    Wow, good news but man that must've driven you absolutely friggin' crazy trying to figure out. Glad to hear you've got a new cam on the way.
  25. Longgone

    10 worst American produced cars

    Ford Pinto, Chevrolet Chevette, and Chevrolet Vega were as disposable as BIC lighters. America had a long hard time figuring out how to make a dependable economy car.
  26. Longgone

    Pinging

    Dude, this thread is like 5 years old!!! :iconbigg: Honestly though I'm thrilled that the advice is still helping you out this many years later. And now the next generation will benefit....cool! :wav:
  27. Longgone

    Dart GTS longitudinal stripe dimensions ?

    No, they do not go under the GTS letters.
  28. Longgone

    Using mustang rotors for 4.5" bc

    I believe Hotrod USA or another one of those brake companies sell a kit that retrofits onto the 10" drum brake spindles.
  29. Longgone

    Using mustang rotors for 4.5" bc

    Sorry I can't help you when it comes to recommending a machine shop in your area but if you read through this thread you'll find a few things that people have encountered with the swap. All things said and done it has been a relatively easy, inexpensive, and effective way of getting the 4.5"...
Back
Top