Search results for query: *

What kind of carb gasket do I run with that weiand stealth intake? Would it be something like this? http://www.summitracing.com/parts/wsn-840002/overview/

Does the gasket go down on the manifold before the spacer plate?

Thanks a bunch, that will be my next task. :)

I do remember there was a spacer on it before I did the rebuild. I guess I removed it without thinking it was important.

Hello, I am working on a 74 dart with a 318, AFB Weber carb and I am having performance issues and some stalling. I have done some reading and maybe I am using the intake for a TQ or Quadra-jet and does it cause a problem and how can I fix it? The secondaries look pretty large to me. Here...

I want to purchase a pair of lower fender braces for my 74 dart. From hole to hole it is approx. 15 inches and the brace goes from the bottom of the fender to the frame. Thank You

I don't know how to check which edelbrock carb kit/tune specs I would use. Because I can't find information on "weber" numbers. The prefix is 9636, SA.

This is after body work, and paint. Sorry for the long wait. Winter will allow me some time to do this. I hope this helps you, I like the look personally. Thanks

I will try and explain some more of the specs I wasn't able to add last time. I have been trying to get more knowledge to better help my self in these situations. I apologize for the intermission in between my postings. With that being said; a 625 weber is being used as the carb on top of a...

Selling a set of 4 hub caps off a 1970 dart. $50 plus shipping (Washington state-Kettle Falls) They are on 14" rims in the picture, the tires are not being sold with the hub caps.

yeah let me take a pic for you man

Lol and of course he lives close to me :P buahahaha Good way to sell it.

Also window crank handles and window crank assembly, and rear window chrome Chrome small block valve covers, headlight switch, and domelight 318 piston rods(full set of 8 )

wish I lived over there :P

I believe they both are small block inspection plates I do not have any good door panels, hard to come by, all my parts cars have pretty trashed door panels, sorry and the quadrajet isnt an 850, sorry about that, Im not sure what size it is. its a 4 barrel though

quadrajet

Also have a 4 barrel carb, a quadrajet? it is in decent shape.

727 inspection plate 904 inspection plate 360 intake off a dodge ram 2-74 dart glovebox doors 3/4 in carb spacer plate 727 transmission with torque converter 3 pairs of 318 heads small block starter 1970 dart small block exhaust manifolds front bumper to a 1971 4 door custom drivers mirror for...

I might have 1 that came off a 19" radiator 71 dart custom

I looked at a picture of a set of front windshield clips and there are two different types, I was wondering if someone could tell me the difference, also I am wondering if B-body reveal/windshield trim clips work on an a-body. here is the picture I saw for front clips

I also have a pair too if needed haha and I dont need them or want them, will probably scrap them if not, get back to me if ya want them, thanks.

oh sweet, that means I can make it pretty dark then at 24% sweet, thank you for the help, I know nothing of tint.

I have a 73 swinger parts car, 318 a/c, No engine or transmission but some other mechanical and interior/exterior parts are there, if you are looking for something just ask and Ill see if there is something for you on the car. Only thing Im taking off it is a bumper and light and I think a back...

Thank you for giving me the tint laws, I was wondering how to find those, they will help alot, and is tint measured in % of darkness?

Where can I get window tint for a back window with a mopar decal in it? I searched online and the forum and I could even find regular tint for it. Its a 74 swinger and Im wondering if I can buy tint for a single window or if I have to buy a full set.

My high beam indicator light works, I have an aftermarket radio, my shifter lights dont work. All the bulbs are good and the fuses are new and good

It seems like I have seen this alot on here, and I have did alot of searching the forums for topics on the matter, I have the same problem as alot of people and that is that my dash lights dont work, but my question was(because I am new to diagnosing electrical problems) how I can find out...

Well here is what the car looked like when it had the vinyl top removed, and the sanding and cutting out has begun, there is alot of rust but I'm sure that is normal, at least the top of it is in really decent shape.

I probably wont find someone who needs them but I will take an offer on them if you want them, I have no use for them, Thank you, I live in Colville Washington and would love to ship them.

Make an offer, I live in Colville Washington and I will ship it if you want.