Search results for query: *

I believe so! Thought I was gonna tear up when it came time to sign the title over. Oh yeah, best part was when I got the original rear seats down from the loft I noticed a piece of paper stuck in between the springs from the bottom. Yeah, you guessed it...the original broadcast sheet from...

Thanks for all the compliments! Dart is Sold and I'm glad it's found a new home with someone that will truly appreciate it and is a fellow Mopar enthusiast. Sad to see her go but the garage is back to being functional again so I can concentrate on the Cuda.

SOLD!! Thanks ForABodiesOnly!

Bump & price dropped to $14,500 OBO Must Sell!!! I'd like an enclosed trailer and would take a Partial Trade if someone has one.

Here ya go Adam. Can ya help sell my Dart? I'm leaving for Syracuse Nationals with it in about 6 hours, wooohoooo...

LOL, that is a tight fit but I still see plenty of room for another one above it.

Price reduced to $15,500 OBO and includes everything; the car with current 360 set up, the NOS kit, and my 69 440 short block with 11.1 Speed Pro pistons bored .030 over and all machine work done! Must Sell I would also consider a partial trade with an enclosed car trailer!

I wish I had one more garage bay available but I bet 99% of you are thinking the same thing LOL. I might extend the garage on the passenger side of the cuda but would need a variance from the township to do it :( I have my compressor, a welder, and the 440 on the stand in the back of...

I used to think the same thing that my dart would be smaller so I moved it over to the other side of the garage. The Cuda is about a foot shorter than the Dart and about the same width. Any reasonable offer will be entertained on the dart! I was asking 16,500 because I have about 20K into it...

I must admit it looks pretty cool owning 2 bad a$$ mopars at the same time all tucked away in the garage but due to space restraints and money still plan to sell the Dart. The cuda arrived today so I took a pic. Adam

Yeah, I just bought a 73 Cuda that's already set up and has been raced previoulsy. It's back haved, 4 link, dana 60, 12pt reinforced cage, all lexan windows, and tin work is all finished. I have a brand new 500" motor I'm putting in it that has 440-1 CNC ported heads and 2 1050 dominators up...

ThanX Bill, I baked in the sun for 2 days here at Carlisle and wish I would have just charged all the people who took pictures and asked me to start it for them LOL. I had tons of compliments and lots of people who said the same thing as you, that I had a good price on it but no takers yet. I'm...

More Pics

ThanX, I'm hoping to post more pics tonight but it's raining right now and I need to get it outside to get some nice photos. I managed to wash it between showers a few hours ago and now I need to go detail the rims and wipe down the interior.

1972 Dodge Dart Swinger (Street/Strip/Show): Fresh restoration completed last year that has all top notch components. I have the title for the vehicle. Engine & Transmission: Originally came from the factory with a 318 but has been replaced with a 360 with iron heads, mopar purple shaft cam...

ThanX for all the replies and input. I have a .484 cam btw. I called Dynamic Converters and worked with Shawn and gave him honest info and numbers not "dream" numbers or wishfull ones. I had made some dyno pulls with it last summer just to see what it had and I also gave him all the numbers...

In a basically stock 360 with just a purple shaft cam, 750 double pumper, with a bone stock converter compared to a 9.5" Dynamic converter with a 4200-4500 stall. I have 4.10 gears. Oh yeah and stock front shocks changed to 90/10 adjustable Competition Engineering shocks. How much of a...

I cut mine open and welded a patch panel in. I don't have a heater and gave up the vent air. Only people who know these cars even notice. Take your time welding in the patch to avoid warping.

ThanX for letting me finally know, ahhh the suspense. Nice idea.

I don't think the center section matters on this one ie, 741, 742, or 489 but it may, you'll have to check. I know you visit this site as well did you go here yet? http://www.bigblockdart.com/techpages/875axle.shtml Adam

I imagine your talking about inside the door jamb. After I got it started at the top by drilling out a few of the welds I used an air chissel and ran it down to cut the rest out. Just be careful you don't dig into the door jamb side try to hit more on the quarter side (you can always trim more...

Anyone know what the largest stroke size I can use in a factory 68' 440 block? I was going to go with a 4.15 stroke but I see 4.25-4.5 and 4.6??? If I use an external oiling system etc. just wondering if I can make a 528 ci out of it or larger if possible instead of the 499 ci. I was planning...

I take it you got em all some nice stickers by the sounds of it. Pretty freakin nice, just to pick up the postage to send to everyone. Unfortunately I've been stuck at work and didn't catch this one. Doesn't mean the suspense isn't still killing me....someone take a pic and share please so I...

Is that a Ford 8.8? The pinion offset is different then, not the same as the 8 3/4. Center the pinion and then measure each side for sure because it will be different cuts off each end.

It looks pretty good but all the shop needs is the flange to flange dimension unless you plan on centering the rear which it doesn't look like your going for. I would lose the old flange location and only provide the dimensions of what you want. The dimension for each side, passenger side from...

I think more specifically, it's only in parts of Canada occupied by those cheese suckin surrender monkeys, no offense. But I'm with ya Adam, I think it's through the advertising. I just find it strange that somehow the advertising becomes regional and not the same (standardized) for the site...

I haven't been on here in for evvvvvvvveeeeeeeeeeerrrrrrrrr but when I read stuff like this it makes me want to visit alot more often. It has to be a Canuk thing! I disabled my pop up blocker, firefox, everything I could think of and nothing. Try to talk to that socialized GM run gov't you...

Prices seemed inflated to me but there were good deals to be had. My buddy has a 70 challenger he's starting to restore and found tons of stuff for real good prices. I spent half the day lugging parts out with him. It was kinda nice watching someone else spend lots of money for once, LOL...

Thanks for all the compliments. Just got back from Carlisle and it was great! I got a few cool parts to finish up the interior and can't wait to leave for Syracuse Nationals with it later this week. I also wanted to add, I owe a huge thanX to this site and alot of people who frequent this...

Well I got the dart all reassembled after paint and took these pics. Had to work out a few gremlins but thats normal for having it torn apart for a year. Just painted the grill 3 days ago and bolted that on yesterday. I went to Carlisle today and man guys, if your not there or planning to...