Search results for query: *

Outstanding build,way out of the box design. If I ever win the lottery we will need to talk !!! I have a 65 gt and can really appreciate all the work going into this car. Keep them updates coming.

I called the an ebay site advertiser in July that had stamped upper arms, The guy told me they were made "offshore" and he didn't know if they were big (73 up) or small (72-64?) ball joints in them so I went with the tubular style uppers(they fit good but there were no provision to hold the ball...

I have one from a 1974 dart V8 pm me if you still need one.

Sorry am looking for a 6 1/4" dia wp pulley

I found some different pulleys to try crank is now 6 3/16" dia, fan is now 6 7/8" dia, they must be mix matched because I had to space out the fan pulley, and re position my alternator a little,anyway I had the car out for almost 2 hrs today in 86 degree weather and the temp gauge stayed at 180...

what is the diameter of pulley? Do you know what year engine it is from? (did the motor its from have a cast iron or aluminum water pump?)

what is the diameter , do you know the year engine it came from ( cast or aluminum pump).

sounds like I have an underdrive crank pulley because it's 5" diameter,I sincerly appreciate all the input from all of you, I checked Mancini and Year One they only stock 1970 up pulleys, Anybody want to sell a set of correct ones for my application? I think the place to start here is to get my...

radiator is a new aluminum 3 core 22" champion, and cooling system is clean&green, is anybody running a cast iron pump with a built 340 and if so what is the diameter of the crank & water pump pulleys? My car has a 5" crank pulley and 7" water pump. I was wondering if someone put an underdrive...

plugs are grey/tan when pulled after cruise shut down, and they are tan/to light black after extended idle check. I found a post about a radiator support seal that mounts to the hood, mine was missing. made a rig with some 1" id water pipe foam and drove it again tonight.now it seeems to hold...

got a 340 in a 65 Dart GT ,it was partly assembled so I don't know whats all in the engine. It overheats after about 20 minutes of driving, have tried 160,180,and no thermostate, 3 core 22" aluminum radiator, with flex fan/and shroud,and even a 16" pusher in front. still slowly gets up to 230f...

Thanks for the good information, I will be sending him some work this winter , Bigmoe

I also need a lower hinge if you find a source let me know, thanks Bigmoe

I need the passenger lower, I think both sides will swap, If you find a source let me know. Bigmoe

Mark thanks for the info, I will check out Schumacher motor mounts, Do you know if the v8 1974 torsion bars will fit the 65? And will the 74 manual steering box work on the 65? thanks Bigmoe

Hi All will a complete 1974 dart V8 front crossmember with upper control arms/disc brakes.and V8 torsion bars, bolt into my 1965 Dart 6yl gt. I have been bitten by the Mopar bug and want to run a small block 340/360, 727 trans 8 3/4 diff. This site is a wealth of good info and good intel is my...