Search results for query: *

1972 Duster 360 motor, Yesterday driving home from the neighborhood I head the sound of a leaky header, when I looked at the bolts I noticed that the 2nd one was almost all the way out. I thought I could just re tighten and be good to go, but nope it was bad. I noticed that there has been a lot...

I was wonder what you guy thought of this for my Duster, I really like it but was wonder what you all thought of this Item, Your options and what you think...

I was wondering if anyone could show me a picture or explain about where the heel pad should be during the time of replacing the front carpet. I have pushed the carpet up as far as it will go and it still seems like the heel pad is still not far enough up, I know I can trim the top which will...

I have a 1972 Duster Manual Brakes, I just replaced the Master Cylinder and need a picture on how to re-install Push rod parts, the push rod has a rod with a ball on the end a rubber o ring and a smaller spacer made of rubber, do I have to remove push rod from inside the car to put together...

I need a set of door jam switch's for my 1972 Duster, the one's I've ordered from year one are to small for the opening all ready made in the door, once I find the right ones I will sell the other here. The part number for the wrong size one's are NG1031 ( Says 3/8" Size ) but I need a bigger...

I am getting ready to install new master cylinder into my 1972 Duster and before removing the old master cylinder I noticed that one of the nuts that's hold the master cylinder to the fire wall is missing and also looks to be pretty short to even hold on to a nut in the first place, my question...

Aluminum Master Cylinder Kit with adapter... I would like to know if when ordering this kit : 1: Which of the 2 would you also get 1 1/32 or 15/16 Bore 2: Will I keep the distribution block that's mounted to the fender wall the same, its the little part under the master cylinder that feeds...

I am in need of a new master cylinder because it is contenting leaking out the front, also I have to pump up the breaks all the time to build up pressure, and I am sure it is because of the leak, the front will run dry about one a year. It has front Disk and drum rears manual brakes. Can anyone...

Was wondering if any one has a set of Duster 72 grill trim pieces. They are the ones that goes in the center of the grill. Not the ones that are on the top and bottom of the grill but the ones that are in the center called Inter Grill Trim...Upper and Lower...

I installed a new set of valve cover about 3 months ago with baffles just to find out that the roller rockers we hitting the baffles. After looking around I found a set that says : Mr. Gasket 9806 Valve Cover Mopar, Tall Does anyone know if this is the correct set to order, if not what are my...

Looking for a new mini starter for a 1972 360 Duster with Headman Header, 833 Trans, Manual steering. What would you buy... I looked for a few but not sure what to buy. Please help Richard

1972 Plymouth Duster I am ready to order a new set of Strut Rod Bushings, I am not sure what to order, and also why does my spacer look like it is on backwards, after looking at 3 different cars, 1 GtX, 1 Scamp, and 1 Dodge all have washer turned around the other way, plus when looking in the...

I have read a lot about how to center the wheels in the rear of my 1972 Plymouth Duster. I have the springs moved inward and the current size of the tire are 275/60/15. The trouble I have is the passenger tire sits a little closer to the rear of the opening than the drivers side. I read you...

I am need of some new Upper - Lower Ball Joints.... 1972 Plymouth Duster w/ Tubular Upper Control Arms... Disk Brakes Large Bolt Pattern.... I have read the bigblockdart web site but don't what to get the wrongs one's I would like to get it right the first time. I have read that if you have...

Yesterday I had a New Pitman Arm, Center Line, and Idler Arm replace due to a problem with slop in the pitman arm and center line. The place I took to have the work done was a good place for front end alignment on newer car but and I am not sure how much the tech has in doing older cars like my...

I am in need of some help installing a Windshield Washer Tank and Pump. Can someone please show me a picture of the plug the gets plugged into the bottom of the pump. All my wires that come through the firewall ( Bulk Head ) are tapped up and not sure if the wire is there or not, so I am asking...

1972 Plymouth Duster. Picture of the kit I ordered. I just ordered a new gas pedal kit, would like to see a picture of the rear of the gas pedal to know how the parts are to look once installed.

I have a good friend of mine looking for a good set Scamp a pillar PM's Please

I just picked up a set of NGK V-Power GR5 plugs, great deal ( Free ) and was wondering if they are good plugs and if they will work what with current MSD Box what should I set the cap at.... 360 Street Build.... Thanks

Yesterday after replacing New Valve Covers - New Gaskets one of the rear bolts only goes into the hole about 1/2 way to 3/4 of the way in before getting tight. I don't want to break it off inside so I have stopped trying to tighten down. I have 2 choices one is to go to the hardware get a...

I was wondering if someone could show me pictures on how the radiator to hood seal should look like installed... It's hard to tell what it should look like installed from just un-packaging new... How should the clips go and the direction the rubber faces... Any help would be great

Who's all going to the Mopar's at Bakers car show....

Installed new Cragar 50Th Edition center caps today....

I seem to be missing some Dash Cluster Bulb Sockets, after looking into this I noticed that there seems to be 2 0r 3 different sizes. Could someone please help me figure out what is the correct ones to order.... This is a standard dash.... Thanks

I am in the process of deciding which to get, and was wondering if you guys had any insight on the question on hand. Would I be better off getting a three core radiator that uses 3 5/8" tubing or a 2 core one with 1" tubing.... Both are good radiators and not sure which to pick.... Thanks

Ordered new Bucket Seats today..... I am pretty excited to see how they turn out..... I will keep all updated after installed.

1972 Duster Top radiator hose collapses after engine cools down, I have read and read about why and have look at many of pages on why this happens but after replacing the Cap with a vented and non vented one it still does it to the top hose. I don't have a reserve system just a chrome catch...

I was thinking about replacing current bucket seats in Duster this year and was wondering if any one here as had any trouble with the following company.... http://www.carid.com/1972-plymouth-duster-racing-seats/cipher-auto-cpa3001-series-suspension-seats-47160766.html#product-details-tab

Hello Guys, I was wondering if you guys would think my 1972 Duster would look correct with a set of Chrome Rocker Panel Molding, I know its a question of likes but just wanted your opinion what you guys thought. Mine is the 1972 Blue Duster the and Green one is a few pictures I found here on...

I just got my new side windows drip molding, I was wonder if there is a special trick to installing the correct way.... I don't want to do it the wrong way and have to take it off and try again....