Search results for query: *

I'm finally beginning the job of fixing up my little 65 Valiant station wagon. Owned this car over 30 years now and now it's her time. I have this blog where I write about crap I'm doing like car and motorcycle work,travel,making art and so on. Here is a link to it where there are a few posts...

Does anyone know where I can buy a new lower seal for a 65 Valiant steering column ? Mine is toast and I'm rebuilding a column as part of the resto of my 65 valiant wagon . It's the rubber piece that the shaft passes thru at the very bottom of the outer tube that I'm looking for.

I have this really nice 1970 Yamaha DS6C for sale . It's a 250 cc twin cylinder 2 stroke . It's all ready to go nicely restored ,a running turn key bike that can be shown as well as ridden with a clean Maryland title. Bought it back in the early 90's to part out but decided to restore it...

This is a nice core with the mounting brackets and signals still attached.It would re plate well and is straight. $100 LOCAL PICK UP only ,no shipping.I'm located in Huntington Long Island , NY

When under my Aspen this last weekend I discovered that one of my springs is failing so I'm looking for a 4 leaf spring (or springs) for my 76Aspen F body.Looking for something in a 150 mile or so radius of NY City so I can pick them up in person.

I have a 76 Aspen with a 7/14 rear and the plates that hold the rear to the leaf springs and shock is falling apart on both sides.Does anyone have a set to sell or know if I can adapt ones from a 65 A body to it.I have both 71/4 and 8 3/4 plates for early A bodies but would rather get the right...

Can anyone tell me where the three shims get placed ,you know,which ones go between which arms.Each one is unique and it's been about 4 months since I took it apart to change the reverse arm that had broken. My old feeble mind forgot where they are placed and I can't seem to find any info on...

I'm selling this stuff as a lot . It is all for "57 Plymouth. The tail lights are in very decent condition with no cracks .With some effort they can be polished to very good condition. The master cylinder kit appears to be new and the owners manual is in very decent condition .All for 150.+ shipping

Back in Jan. my reverse arm on my shifter broke .Got it out of reverse with the shifter and had the 4 forward gears to drive home with. I put in a good reverse arm # 2336 and put it all back together and can't get reverse no mater how much I try.I've had these in my cars for 40 years ! I know...

I'm selling these as a lot not as individual pieces so don't ask. What we have is a set of interior trim , a few sets of rear window trim , a 273 2bbl air cleaner ,and two vacuum assist cans for factory power brake systems. $100. for all plus shipping.I no longer ship out of the US because the...

Yesterday I was rebuilding a distributor for my 66 Valiant convertible.It's a 225 slant.I was taking 4 different distributors apart for good parts and noticed that every one had a different value stamped on the arm that connects to the advance plate.There was 6.5 , 7.5 ,9.5 , and 10 . I'd like...

The other day while out in the world in my 65 valiant wagon I went to back out of a parking space and had no reverse.Looked under the car and saw the linkage hanging connected at the trans and the end of the shift arm broken .Never saw this happen before but ,some guy helped me push it out of...

Does anyone have the correct National seal number for both seals for a 1965 Valiant manual steering box ? I am getting one ready to put into my 65 wagon and want to take it apart ,clean it all out ,pack it with good grease and give it new seals. Thanks

I have an Offy 4 bbl intake I want to sell. $250 .+shipping . I take US Postal money orders only as payment NO PAY PAL or other forms of payment. Located in LI , NY

Ihave a set of driver quality tail light housings for a 66 Valiant or Barracuda for sale There is very light pitting here & there in the usual places . The chrome is in overall good condition . They are located in Long Island NY . $75. shipped anywhere in the lower 48 states NO PAY PAL , US...

I have this left(drivers) side plastic trim piece for sale . $25+ shipping .Located in Long Island NY

These are for the bottom of the rear window for 1st gen Barracuda .$ 95. + shipping . Located in LI , NY

This 6 cyl linkage and Z bar was removed from a 6 cylinder 1972 Duster The short Z bar is for a small block of the same vintage. The linkage and longer Z bar is from a 1972 A body (Duster) that I parted out . $ 80 shipped in a flat rate box to the lower 48. I am located in LI , New York

I have two Holly 1 bbl carbs that are complete that I took off from a 1976 Dodge 225 that were in working order 3 years ago when removed. $75 for the pair , shipped to the lower 48 in a flat rate box. Located in LI , NY

I have a pair of Z bars and the linkage that works the clutch safety thing .The short one is for the 8 cylinder and the long one is for a 6 . $ 80 shipped to the lower 48. I am located in LI , New York I took the 6 cylinder one and the linkage out of a 1972 Duster

I have 5 or 6 original 1965 / 1966 273 V8 radiators that I am thinking of selling .I am thinking of cutting the cores out and just selling the top & bottom tanks and side brackets .They would need to be re-cored anyway so this would cut way down on shipping I'm thinking. This is for guys doing...

I have a bunch of early barracuda rear window trim I'm selling as a lot.There is one 66 piece and the rest is 64-65 . Needs re-plating $100 + shipping for all . Located in LI NY

I have 4 2bbl Carters from 273's that I was working with years ago. They are all there but have been boxed up for a good 20 years. Located in LI NY $ 40 + shipping each or $140 + shipping for all 4 as a package

I have this old Carter 1bbl from a 1960 or so slant 4 sale . Located in Long Island NY . $50 + Shipping

I have a lot of various 273 linkages here for sale . $50 for all + shipping . Located in Long Island NY

I have 3 straight sets of Valiant quarter spear moldings for sale.I know they fit 64-66 and think they will also work on 63 but not sure. $35 per set +shipping . Located in Long Island NY

I have this left(drivers) side plastic trim piece for sale . $25+ shipping .Located in Long Island NY

I have this flip top gas cap for sale Not pitted but the chrome is worn.A good candidate for a rechrome. Located in Long Island , NY $65 shipped to your door in the lower 48 states

For sale here are some 1st gen Barracuda interior pieces . Located in LI , NY parts lot only $45. shipped to anywhere in lower 48 states

I have three sets of 65 Valiant/Barracuda tail light housings for sale.They are driver quality with the usual slight pitting on the top.Decent over all condition for a daily driver or good raw material for the chrome plating shop. They are located in Long Island , NY $100 + shipping