Search results for query: *

  1. duster2

    Skinny Steelies

    He retired , to the best of my knowledge. He was getting ready to retire back in 2019 , the last time I went to Carlisle. Frank Long The Wheel Guy ( also retired )
  2. duster2

    Skinny Steelies

    Seems like Coker also had 15 x 5 steel wheels in at least one style , I have 15 x 5 cop wheels on the front of my 73 Duster , with 15 x 8 on the rear. Nice combo , I think the 15 x 4 is just too narrow for me. Frank Long The Wheel Guy
  3. duster2

    A Body wheels on a B body rear axle assembly

    I have two 15 x 7 Magnum 500 wheels made for a B-body rear under an A -body , they have 5 1/8 backspace. They are for sale. Frank The Wheel Guy
  4. duster2

    Specialty Wheel (Mopar Rallyes)

    Specialty Wheel as a company has not existed since 2020 , when Coker killed my deal and wiped them off the net. Coker has owned Specialty for a number of years and has some kind of vested interest in WV. For the last few years all the magnums , ralleys and steel wheels are made in the plant in...
  5. duster2

    Upgrading to 15' wheel vintiques series 63

    Just as soon as you take the wheels from the box , lay a straight edge across the back of each wheel and check the backspace. A few years ago I bought 2 wheels from Jegs and from Summit , both pair were not as I ordered , they were anywhere from 1/8 to 1/4 more backspace and each pair where not...
  6. duster2

    [WANTED] Looking for 5 on 4 wheels

    More than likely the 14 inch will not clear , because the inside of the hoop / band is 12.25 inches center of the wheel size. The small bolt steel wheels from Coker don't use a factory wheel center , they increased the center size to 13.25 inches , same as the big bolt wheels , so they can just...
  7. duster2

    [Found!] Looking for center

    So you need one complete center and one just the middle pop in piece , is that correct ?? I may have both , let me look. Frank
  8. duster2

    Wheel bolt pattern for original Dana 60 differential

    Curious about the original rim/wheels that were on the rear, as far as the size and backspace on the wheels. The rear ends in the cars were B-body, correct. Frank
  9. duster2

    Home made 15 x 10 with 5 on 4 1/2 b.c. and dog dish hubcaps.

    I have a good number of the 15 inch wheel centers , these are brand new stampings. The stamping was made from a CAD drawing a friend of mine did , using a 15 inch wheel and adding around the outside area , past the nubs to get to a 13.25 total measurement. They are 13.25 plus 1/16 across the...
  10. duster2

    Steel wheels

    Ok , then which is it , dogdish caps ( just covers the lugs ) or full wheel covers ( covers everything ) ?? There is a way to make a 14 inch wheel cover fit a 15 inch wheel. Lots of work and not cheap. Welding and you cut up a few 14 inch wheels , front and back. Frank
  11. duster2

    Steel wheels

    Coker and Wheel Vintques both make small bolt steel wheels in the 15 inch size and your caps will fit 14 or 15 inch wheels... Frank
  12. duster2

    [WANTED] 15" 5x4 bolt wheels

    I have a pair of 15 x 8 small bolt steel wheels that will accept the 9 inch cap. Think they are 4 5/8 backspace , they were a little too close to the springs on my car. May work on others or with a spacer. $150 plus ship or pick up in Terre Haute , Indiana. Frank
  13. duster2

    Steel wheels

    The early A bodies had 9 inch caps , I have sold a number of the flying saucer caps , at least that's what they looked like to me. Frank
  14. duster2

    Steel wheels

    Now I have never seen a 13 inch small bolt ( 4 inch ) pattern rim that will accept a 10 inch dogdish hubcap , this wheel is off a 62 Lancer you say. Lancer was the small car correct , not like the 62 Dart , which was a B body , correct. Frank
  15. duster2

    [SOLD] Mopar 15" Steel Wheels Custom Backspace

    Just wondered , I had a pair of 15 x 7 Magnum 500 wheels made up with 5 1/4 backspace for a guy , but he didn't like them. I still have them. Frank
  16. duster2

    [SOLD] Mopar 15" Steel Wheels Custom Backspace

    Just curious, were these made, so you could use a B-body rear end, under an A body?? Frank
  17. duster2

    [WANTED] Rally Cap (Dark Argent)

    Yes got your last message. Thanks for telling me. Been busy , I will get a pic in the next few days. I don't do well in the heat we are having. Frank
  18. duster2

    [WANTED] Chrysler Road Wheel Center Cap Dome 1976-1979 Dodge Plymouth

    These look like the ones I have , but mine are much better. Frank
  19. duster2

    [WANTED] Chrysler Road Wheel Center Cap Dome 1976-1979 Dodge Plymouth

    I have 4 very nice center cap tops , mine say Chrysler Corporation on a black background. I will get them out and get a picture. Think they were from a Mirada !! Frank
  20. duster2

    [WANTED] Rally Cap (Dark Argent)

    New or used ?? Also it looks like you don't have the brushed decal on the center of the cap you have in the picture. Frank
  21. duster2

    [WANTED] Rally Cap (Dark Argent)

    I have new and used small bolt ralley wheel caps. $35 used and $55 new. Light and dark. Used supply somewhat limited. Plus shipping in USA. Frank
  22. duster2

    Home made 15 x 10 with 5 on 4 1/2 b.c. and dog dish hubcaps.

    Being you are able to do the work, do you know of anyone in the area that would want some of my wheel centers to make wheels, to use the early 10 inch dogdish caps ??
  23. duster2

    Home made 15 x 10 with 5 on 4 1/2 b.c. and dog dish hubcaps.

    Hey good to see you are still here. I am the guy that had the 10 inch dogdish cap wheel centers stamped and I made sure that they still included the flange to weld to , like the factory wheels. To me the flat flanges provide more area to weld to , but considering I don't even know how to weld...
  24. duster2

    Home made 15 x 10 with 5 on 4 1/2 b.c. and dog dish hubcaps.

    This is an old thread and the guy that did this may not be on this site any more. I am just wondering how much of the center flange was left to weld to. I mean he went from 13.25 down to 12.625. Was there anything left to weld to ??? I wonder , Frank
  25. duster2

    Question about chrysler rallye wheel viniques and a disc conversion

    The 14 inch factory small bolt wheels are 12.25 across where the wheel center is welded to the outer band. Then it flairs out , but it may not be enough. The small bolt 15 inch steel wheels that I used to get from Coker were 13.25 at the welded area , I am pretty sure. I will have to get one out...
  26. duster2

    1970 DUSTER WITH DISC BRAKE CONVERSION WHEEL HELP

    Myself I would use a 15 x 6.5 factory ralley on the front. The 15 x 7 is to wide and the 15 x 6 , there is no trim ring for the 15 x 6 that matches a ring for the rear wheels. If you buy any aftermarket wheel , measure the backspace on each wheel , to make sure they are the same , correct...
  27. duster2

    Time for new tires and rims for the 68 Dart

    I have a pair of 15 x 7 Magnum 500 wheels , that have a 5 1/8 or 5 1/4 backspace , made to fit an A body with a B body rear. They are for sale , PM me if you are interested. Frank
  28. duster2

    [Found!] Rally wheel center caps small bolt pattern

    I have brand new 70 and brand new 71 small bolt centers. $180.00 for a set of 4 , includes bolts , plus shipping to you. Frank
  29. duster2

    [SOLD] Mopar 15x7 Custom Steel Rims w/ Drag Radials & Front Runners

    Question , did you have the wheels made to a 5.25 backspace to allow for a B-body rear end under an A-body ?? Frank
  30. duster2

    Any Magnum 500's on a blue dart?

    I don't doubt that a person told you the made small bolt Magnum 500 wheels. What I do doubt , is they would pay for the new stamping to make the wheel center in small bolt and make a brand new , smaller sized center cap , for the wheel , that will have a very small selling possibility. Also they...
Back
Top