Search results for query: *

thanks Dave999 and Cudamark! those are the worms are I am trying to avoid. Good info and helps alot! thank you.

thanks for the info Murray.

I have a 71 dart, power steering box is leaking from the plates that bolt to the top. I am not sure Which plate is leaking yet. Sorry for not knowing what they are. Is it ok to remove them and check them for problems and maybe apply a thin layer of gasket sealer? Are there any gaskets that can...

67Dart273, just wanted to thank you for taking the time to go over everything with me. I just want you to know I think your electrical skills on these cars is top notch! I'm mediocre at best. What it did do though, It made me go back and review everything I did and study the schematics. I...

thanks, once I posted I realized that I got more problems than I thought. I also realized that I don't need the indicator lights for the signals to work. One thing I didn't mention was that I put in a IDIDIT steering column also. sorry for the confusion. I don't have 12v on the power wire...

does anyone have a diagram or can tell me what i need to do to bypass my cluster wiring for the turn signals? i know blue and light green are for the left and right signal but that's about it. I have looked at the schematics but its just confusing me more without the the cluster wiring diagram...

Thank you so much charger426 for taking the time to search and help me out. It will be a while before I attempt to redo my cluster but this definitely helps a bunch.

thanks for the info, I guess I need to just look at the wiring diagrams and try to figure it out. Is it just the turn signal lights that go through the cluster or do others also? Thanks again sir!

Wow, that is super nice, I never thought about putting a digital display in place of the old stuff. Might have to look in to this. Thanks so much for sharing.

I am in the process of redoing my instrument cluster to newer non oem gauges and do not know how to keep the turn signals and anything else that runs through these circuits working, does anyone know how to do this? I am removing the panel and starting with a piece of sheet metal like another...

Thanks everyone! I checked them visually and don't even see any coating gone or scratched. Definitely will try to reuse. They ain't cheap!

Can cometic MLS head gaskets be reused? Gaskets were installed and torqued but not fired.

thanks, Ill check it out.

its a pre magnum that came with roller cam and roller lifters

thank you, now I got it. So is there a bolt on and run it kit?

ok, my block even though its pre magnum does not have the oil passage (tapped and plugged) for the shaft oiling, it comes through the cam journals to the pushrods. would that matter?

ok, i guess im confused, How does the pushrod oil the rocker and shaft area? What rockers will I need? I have 1.6 Hughes stud mounted rockers right now.

I am using roller lifters and roller cam, what rocker setup would i need to use the trickflow? Would I need to Clearance the the pushrod holes also?

Anyone got ideas on where and how to get a descent aluminum head before the end of July? Needed for my 90 360 (pre) Magnum, using Chevy rockers and oil thru pushrods.

i just went to hardware store and found countersunk stainless screws with 10/24 thread pitch.

found this on the web

I'm sure Someone will be offended but, I used these, used smallest I could find. Had to drill holes a little larger. been holding fine for about 10 yrs.

thanks Rusty.

thanks Treblig! I decided to block the oil holes for the shaft mount rockers since I'm running magnum heads with pushrod oiling and saw this. Thanks for the "peace of mind"

98 360 pre magnum with kb107 pistons, Are the black rings at the top edge of the bore normal? If not any ideas what would cause this?

You could do it yourself, doesn't take much except time and effort. I just used the recommended settings that came with the paint. Body work, clean, prep, paint.

after doing some research I found what I think are the part numbers (2167447 and 2167446) and ordered two NOS off of Ebay very pricey but needed.

Anyone know a source for 63 dart door latch assembly or repair kit?

After my makeshift paint booth collapsed on my car when painting and the easy pour lid fell off when I was pouring paint, It all came out "ok". Needless to say, I got alot of debri in the paint and had to cut and buff alot. I am really happy with the results and had My son here to help. " he ran...