Search results for query: *

Hi anyone out there that has power steering on a 67 Dart with the factory 6 cyl K frame. Car has a 1968 383 engine b body 383 manifold on right side Chrysler C body manifold on drivers side and Schumaker motor mounts. Or some other combination please let me know what worked for you or how...

Hi I tried to sign up twice both times it stated my e mail address or name was already used some how I don't think that would be possible. Blair Harris

Hi i have been using Quaker State 20w50 what are your thoughts on that

Hi just wondering what you recommend for synthetic oil for 1967 Dart GT 383 for normal street use.

Hi i new the Idler arm was mounter diffrently and thought it would be ok. I have an after market steering column with a diffrent coupler so i think i can just use it or an adaptor if mine wont work. Thank for the advice Blair

Hi i have a 67 Dart with a 383 mounted in a 6 k frame now manual box. Want to change to power box off a 68 to 76 A body to my 67. Have always been told 67 had a diffrent spline or pitman arm was diffrent. What kind of issues will i get into changeing the power box off a 1970 A body ??

Hi would it be possible the arm itself is a diffrent style on a 67 Dart compared to the 68 to 72 style ? Blair

Hi i am looking at buying from Bergman in NY a power steering kit for a 1967 Dodge Dart with a 383. They seem to think that all A body 72 and earlier had a 1.125” diameter spline pitman shaft. I was always told the 1967 was a seperate year and diffrent style than 68 to 76. Can anyone confirm...

Hi thanks for your reply, do you have a manufacturer name and a part # for the branch resonators. Also what is the smart phone app called ? Thanks Blair

Hi i have a crown gear part # out of a 1972 Charger 9 1/4 rear end. I would like to know what the gear ratio is part # 2852928-271 date coded 2-10-72. Normally in my expeience the ratio is part of the code number. Does anyone have a crown gear casting number decoder? Thanks Blair

Hi thanks for the advice,i did put the cross over pipe on and it slightly reduced the noise still a huge problem. So i will be taking your suggestions and looking into the Walkers seems like the quickest fix.

Hi i have a 1967 Dart GT 383 with manifolds 2 1/2 dual exhaust front to rear flowmaster mufflers. At about 1600 rpm i start to get a high pitch sound and it increases to about 2400 rpm. To a point you cant hear the radio it drop of almost completely at 2500rpm. I have done some research and a...

Hi after reading you replies i will give a bit more information. Keeping in mind everything worked finetill i changed the carpets on a console shift car with factory air (so extra work tighter fit) When you pull the head light switch both front & rear parking lights & the head lights work.The...

Yes the four way flashers work as long as i dont push down on the break pedal then both the front flashers will bot stay on till i release it. Thanks to both of your suggestions i will look tonight and let you know what i found.

Hi looking for some advice. l just changed the carpets and when i was done had no signal lights . Also nototiced when i push down the brake pedal the both front signal lights come on and stay on till i release the brake pedal. Thought i must have put a screw through a wire when i put the sill...

Hi do you still have the 67 bucket seats ? Thanks Blair

Hi do you still have the bucket seats?

Hi do you still have the seats if so what is your best price and whwre are you located Thanks Blair

Hi need to know what other option are aviable to replace the stock 1967 buckets in my Dart GT. I was told 1966 & 67 Barracuda take the same covers and foam. My problem is I ordered all new interior for 67 GT mounted the rear seats then found out the front Buckets had been replaced with seat...

Thanks for your help i will give tha a try

Hi i have a 1967 Dart 383 with sway bars, it has been updated to disc frakes. The stearing only cuts about 1/2 way then the sway bars hits the brake caliber. I have no idea what the spindles and calibers are off of any ideas.

Hi i did not realize that you had posted the picks on the for sale section till i read your email again today. Thanks for your reply the emblems i am looking for are go in the insets in the seat i believe yours are for the door panels. I have attached a pic of the emblems i am looking for

Hi i am replaceing the seat covers on a 67 dart GT and i am short two metal emblems that inset in the center of the seat cover.

Just looking for some advice on setting up an 8 3/4 rear end. I am replaceing the axle bearings and inner-outer seals in the housing. I also took the pot apart and exchange the spider gears with a posi unit. It is a 741 carrier 391gear had to change the yoke also to accomidate the 10 spline...

I honestly cant answer that i am getting the car out of body shop tomorrow will get that information and send it to you. What are you thinking if it is just a stock piece or has adjustable advance

Hi i have a 1968-383 in a 67 Dart with a mild cam 383 torker aliminum intake electronic distributer Chrysler electronic box and MSD coil 750 Elderbrock carb. Running manifolds with dual 2 1/2 exhaust. Considering all above what should i set the timing at to get the best all around preformance...

Thanks guys my concern was that considering it is not a clutch style unit the additaves mig cause the Auburn set up not to grab as well. So i think i will use it anyway as i think it did come in the stock rear ends.

Hi just wondering if anyone can tell me if i need to use the mopar Posi track fluid & the treatement with the Borg Warner Spin resistant non clutch type posi. Considering they do not have clutches and are metal to metal.

Hi thanks for your help. I have it all apart i was guessing that was what i had to cut down to get it to lock up. Just was not sure how to take up the slack i machined off . Any idea how many thousands of an inch it usually takes to get it to reseat? One other question what did you use for...

Hi I am quite sure the main bolts on the 273-318 are not tapped to accept the windage tray mounting bolts. I dont think i have ever seen a windage tray on any 360 either could be wrong on that one.