Search results for query: *

Hi anyone out there that has power steering on a 67 Dart with the factory 6 cyl K frame. Car has a 1968 383 engine b body 383 manifold on right side Chrysler C body manifold on drivers side and Schumaker motor mounts. Or some other combination please let me know what worked for you or how...

Hi just wondering what you recommend for synthetic oil for 1967 Dart GT 383 for normal street use.

Hi i have a 67 Dart with a 383 mounted in a 6 k frame now manual box. Want to change to power box off a 68 to 76 A body to my 67. Have always been told 67 had a diffrent spline or pitman arm was diffrent. What kind of issues will i get into changeing the power box off a 1970 A body ??

Hi i am looking at buying from Bergman in NY a power steering kit for a 1967 Dodge Dart with a 383. They seem to think that all A body 72 and earlier had a 1.125” diameter spline pitman shaft. I was always told the 1967 was a seperate year and diffrent style than 68 to 76. Can anyone confirm...

Hi i have a crown gear part # out of a 1972 Charger 9 1/4 rear end. I would like to know what the gear ratio is part # 2852928-271 date coded 2-10-72. Normally in my expeience the ratio is part of the code number. Does anyone have a crown gear casting number decoder? Thanks Blair

Hi i have a 1967 Dart GT 383 with manifolds 2 1/2 dual exhaust front to rear flowmaster mufflers. At about 1600 rpm i start to get a high pitch sound and it increases to about 2400 rpm. To a point you cant hear the radio it drop of almost completely at 2500rpm. I have done some research and a...

Hi looking for some advice. l just changed the carpets and when i was done had no signal lights . Also nototiced when i push down the brake pedal the both front signal lights come on and stay on till i release the brake pedal. Thought i must have put a screw through a wire when i put the sill...

Hi need to know what other option are aviable to replace the stock 1967 buckets in my Dart GT. I was told 1966 & 67 Barracuda take the same covers and foam. My problem is I ordered all new interior for 67 GT mounted the rear seats then found out the front Buckets had been replaced with seat...

Hi i have a 1967 Dart 383 with sway bars, it has been updated to disc frakes. The stearing only cuts about 1/2 way then the sway bars hits the brake caliber. I have no idea what the spindles and calibers are off of any ideas.

Hi i am replaceing the seat covers on a 67 dart GT and i am short two metal emblems that inset in the center of the seat cover.

Just looking for some advice on setting up an 8 3/4 rear end. I am replaceing the axle bearings and inner-outer seals in the housing. I also took the pot apart and exchange the spider gears with a posi unit. It is a 741 carrier 391gear had to change the yoke also to accomidate the 10 spline...

Hi i have a 1968-383 in a 67 Dart with a mild cam 383 torker aliminum intake electronic distributer Chrysler electronic box and MSD coil 750 Elderbrock carb. Running manifolds with dual 2 1/2 exhaust. Considering all above what should i set the timing at to get the best all around preformance...

Hi just wondering if anyone can tell me if i need to use the mopar Posi track fluid & the treatement with the Borg Warner Spin resistant non clutch type posi. Considering they do not have clutches and are metal to metal.

Hi looking for some specks on how to rebuild a Borg Warner 8 3/4 spin restintant unit. I have read a couple articles that you can Machine the locking unit and get full factory results. Any help would be appreciated. Thanks Blair

Hi i am looking for a set of set of 383 Four Barrel Hood emblems that attach to the raised hood mounting hardware. I have attached a picture of the emblems i require. I would like to replace the 340 four barrell on the existing hood trim.

Hi i want to upgrade the manifolds on my 67 Dart 383. I am currently running some early 60 C body manifolds a bit tight and restrict the HP. I have all the Casting # from over at My Mopar for the stock manifolds. What i would like if someone can help is some good pictures of the stock BB...

Hi i am looking for a fast back Cuda 67-68-69 , must be rust free V-8 in drive away condition. Not looking for a project car have a 67 Dart 383 727 8 3/4 391 almost finished i would trade plus cash for right car. Prefer the East coast of the US or Central or Eastern Canada. Will pay Cash for...

Hi i have been reading some of the posts on how hot i can run my Dart without causing a failure. Can you tell me what is an exceptable high temperature i can run a 67 Dart with 383,it only runs hot when stuck in traffic idling. Also what temperature thermostat should i use ? I am running a...

Hi i am looking for a digraham or a break down picture on how to install the new wiper arm rubbers. I know from the past it can be a difficult job if the bolts are rusted on the arms. Need to get fixed cant go out in the rain or leave the car outside if it rains.

Hi i have a number off the transmittion in my 67 Dart 383 BB and i am wondering if anyone can decode it so i know what production year it is. I want to replace the manual shift reverse acting valve body in the car. # on casing DH45H9D126926

Hi i want to replace the winshiels in a 67 Dart only to find out i require a plastic locking strips. These strips go in after the windshield is installed to push out on the rubbers and stop leaking. Two questiond do you know where i can buy the locking strips,possibly in Canada mopar dealers...

Hi i am looking for all or any parts required to change a 67 Dart with a 383 and manifolds to a power steering set up. I need pump/mounting brackets, steering box,houses anything you want to sell. I also will have a good manual steering set up to sell to anyone who wants to add headers to a A...

Hi i would like to add a booster to my 67 Dart with no power brakes,does anyone have a digraham of installing the booster vacume lines?

Looking for some advice and possibly a swap with someone who wants to change from power to manual steering. Can you tell what other A body power steering parts will fit on a 67 Dart GT with a 383 BB no headers manifolds installed. If anyone has the parts power steering box pump brackets and...