Search results for query: *

I cannot say enough good things about Wizard Cooling. Wizard Cooling Performance Aluminum Radiators

PM sent

Thanks. I'm going to check the belt tension and adjust the pump mount if it does seem too slack. I'll clean the belt with some alcohol for good measure. I don't "think" that I damaged the pump lines as I only loosened the hose clamps enough to remove them from the pump, but I'll give them a...

I just finished installing a new aluminum radiator in my 72 demon. While removing the old radiator I accidentally broke a transmission cooler line. While replacing the new radiator and new transmission cooler lines I removed the power steering pump to give me more room to work the new cooler...

Sheesh, I replied this morning but apparently it didn't take. Anyways, I'm adding some update photos of my refurbish project. First was taken after I had masked and sprayed matte black around the trim, the underside and the speedo window. Second shows the new white gauges which were super easy...

Thanks for the advice, I've purchased replacement LED bulbs to brighten up my display because it was REAL bad beforehand and my gauge kit should arrive today (crossing fingers). Shadow 21 your finished product looks AWESOME, I pray that mine turns out looking as nice. As for the chrome trim...

I am attempting a DIY instrument refurbish project. I purchased white vinyl gauge stickers from http://www.whitegauges.net as well as upgraded white LED instrument cluster lights and plastic lens polish to try and make everything clean and "new" again. The wood grain is in really good shape...

Alright, it's been a while, life has gotten in the way (new kid and a cross country move from NY to GA) but as life has started to settle down I've had some time to investigate this ignition issue a little more. The last thing I did was jumper from the brown wire connected to the starter relay...

I recently moved from Upstate New York to Atlanta, GA and need to have my Demon shipping. The best quote I've received so far is $800 from T&J Auto Transport. My demon is no trailer queen, I don't mind if it's on an open air trailer, but it is in solid shape so I want it handled properly. My...

Looking for a decent quality dash pad to replace the cracked one currently in my 72 Demon. Preferably dark green, I would like to avoid painting/dying. Not interested in a cap at this time. I know someone out there has one that they're not going to use, just gotta find him/her. PM me with...

When we initially bled the brakes we did it just how the video showed except that we'd pump 3 times then hold. Initially there were some bubbles then no bubbles so we presumed we were good. That was done on just the rears. When car was in drive and brake applied left would stop, right kept on...

Alright, tried bleeding the brakes again this evening. I'm getting drips out of the rear both left and right. Bled the front driver side and it squirts right out. Broke the bleeder valve on the front passenger side so it looks like I'm replacing that wheel cylinder tomorrow (hopefully)...

PM sent

Yeah, in retrospect I should have done that. I replaced driver side setup first then found the destroyed wheel cylinder when I took apart the passenger side. By the time I'm done I'll probably have taken each side apart about 12 times so I should be pretty quick at it.

The drums were not replaced. I'm attempting to get one more summer (maybe two) out of the 7 1/4" until I can upgrade to an 8 3/4". To add, when I start the car (it's currently on jack stands) and place the car into drive, and then depress the brake, the drivers side rear drum spins a tiny...

Alright, here's the story. Replaced shoes, hardware/springs and wheel cylinders. Adjusted brakes to rub slightly when cars in neutral and bled brakes. When car is put into drive and brake is applied the driver side turns ever so slightly but the passenger spins freely (like car is going 15mph)...

While driving to put my Demon away for the winter this past winter my right rear brake seized up on me just down the road from my storage garage. Pulled it out this Spring to get it road worthy again and fluid in the master cylinder was low. It's time I took my rear drums apart and refurbish...

Still in need of a green dash pad if anyone out there has one. Thanks FABO.

Are the taillight lenses in good shape?

Any idea what rear end is in it?

67Dart, Good comment about running the car in neutral, that'll save some mess! Bill, can you explain your comment? I think that I follow you but I am new to all this. :)

67Dart, I own a service manual and the first thing I tried was attempting to adjust that external linkage. I watched as my neighbor shifted the car from park to drive and back again to determine which was it'd need to adjust. Then I loosened the bolt and attempted to adjust the linkage. It was...

Sorry it's been a while since I replied, life has simply been crazy. I finally got around to trying some of the suggestions posted here. I disconnected the wire from the starter relay and used a jumper cable to connect that to ground. The car started up perfectly from the 'park' position and...

Any chance the dash pad is in decent shape?

What shape is the interior in? Woodgrain or no? Looking for a decent shape dash pad more than anything.

It is an automatic trans and it doesn't click when try to start it and it doesn't successfully start.. 67dart thanks for the tips, that will help me eliminate some of the non-issues.

It first started with what I thought was a linkage issue. My 72 Demon (225 3 on the tree) would intermittently not start while in park. If I shifted into neutral it'd fire right up. I thought my linkage might have loosened up over 30 years of use but figured I'd wait until winter to fix it...

I would have slapped that asshat. First rule I learned at age 6 with my Father was "Look with your eyes, not with your hands."

PM Sent on brakes

How much for the dash pad and seat hinge covers? I see the one hinge cover laying on the carpet in the second picture, those are exactly the style I need for my demon.