Search results for query: *

anybody have any "driver" quality ones for use on a race/street car?? Bob

I hope those parts were waterproof! I just got back from there, I hope Saturday is a drier day!!

It has a Holley 1 barrel carb

I ahd computer issues and my current ID is registered to my work email, so I had to reregister to a new username! Yes I still have it and yes it will work with your manual trans (the crank hub diameter change happened around 1968 or so, which means a 1981 engine will work in a 1981 vehicle...

I mounted a Summit 8 gallon fuel cell in the spare tire well of my 73 dart sport. I fabricated a frame to mount the fuel cell to the floor of the spare tire well out of 1X1 steel angle. Only had to drill four small holes in bottom for 1/4" bolts (mount frame) and a 5/8" hole (fuel line). Bob

Great job on the dart sport! Now I know what I want to do with mine when I retire it from racing. Bob

great pics. I went to training class in April around the corner from there back in April. We went to museum and loved it. They have quite a car show going on inside that building also!! Bob

I used shopline 2K urethane primer on my dart sport when I painted it a few years ago. The primer worked fine and was quite affordable. I did not use shopline or PPG color on the car because the vendor who sold me the shopline primer would not provide me a data sheet on the shopline paints...

just build it stock, my 67 barracuda convertible (273 2 bbl/auto) got 21-22 mpg with over 100K miles on powertrain.

Competition Engineering on all four corners, with MP SS springs out back. they work great!! Bob

Where are you (and the parts car) located? Thanks, Bob

A friend of mine at the track is looking for a drivers door window glass for a 1968 Dart 2 door post car. Anyone out there have one? Thanks, Bob

if you have a SBP rear you can buy new reproduction mopar rallye wheels in sizes up to 15 X 8 to fit it. I got mine from summit for about $100 each shipped to me in MD. I found this to be the most cost effective way to mount slicks on back of my Dart Sport with a SBP 8 3/4" rear (which came...

These are still produced by aftermarket auto glass manufacturers . I bought an aftermarket WS and had it installed with a new reproduction WS gasket (from Year one) in my 1973 dart sport. At the time I inquired about being able to get a WS for my 1967 barracuda convertible , they checked and...

Factory SBP rallye wheels are 14 X 5.5, anything else had been modified or is a reproduction (like the 15 X 8 SBP's I have on the back of my car) Bob

Saw this add on craigslist in Richmond, VA and thought someone here might be interested: http://richmond.craigslist.org/car/598761996.html

I also watched the 2005 documentary "WALMART: The High Cost of Low Price", and it made me feel guilty about the money I spent at WALMART in the past. I refuse to even set foot in the door. I also tend to agree that other "big-box" stores also are a problem and the retail environment is...

I have worked in the Spacecraft field for almost 20 years (16 of it for the NAVY) , designing, testing and building spacecraft. I do not consider a scud missle traveling at a several times the speed of sound as "slow". They are slow compared to more modern missles, but still going along...

Hooker Competition headers (1 5/8" tubes) work with power steering, I have a set on the barracuda and dart each with power steering. Bob

I have a friend who works at Exxon/Mobil in the lubricates area (basically a mechanical engineer who specializes in industrial lubrication). Anyway he looked up all of the ZDDP values for the MOBIL 1 product line and informed me that the two Mobil 1 versions of 15W50 oil (extended life and ?)...

Your local government may collect household "hazardous waste", mine does. It keeps folks from pouring stuff like that down the drain. Bob

I finally finished installing the new engine in my dart sport, so we installed the hood today. I remembered an earlier post where there were some questions about the location of the factory installed "twin scoop" on a dart sport hood and the dimensions of the underhood features, so I took a few...

I have been too busy for any E-bay selling lately, so I will definately not list any thing before or during that week. I am pretty ticked off about the feedback thing, I have had to leave negative FB on a few @#$holes over the last 10 years (joined ebay in January 1998) and really do not...

I bough a 340 that is a pretty fresh rebuilt engine with mechanical camshaft and valvetrain. It has the ductile iron adjustable rocker arms, with matching pushrods, etc. While I was adjusting the valve lash prior to firing this engine up for first time (at least for me, since the folks who...

I have the same basic set up : 340 .030 oversized with TRW forged replacement pistons (flat top 10.5:1 compression) Steel crank stock rods with new bolts , reworked, new bushings, etc stock "X" heads Mopar Performance .509 lift hydraulic "purple shaft" cam and lifters Cloyes double...

a 72 dart hood will fit a 71-72 demon and a 70 -72 dart. 73 duster can use a hood from a 73-76 duster or vailiant as far as 1973 dusters are concerned: I am not sure if they came with a Hood Scoop (sport hood) option like the dart sports. I know the IHRA allows it in Crate motor stock and...

I cannot understand why the newer books list RN12YC plugs for a 340, an engine with that much compression should use a cooler plug RN9YC. RN12YC's are for an engine with lower compression 9:1 like a 318/2bbl. I had the same issue with Champion Platnium Plus plugs I bought for my engine, the...

MY 73 dart sport came from factory with the "Sport Hood" option, which is basically a fiberglass "twin scoop" bolted to a standard hood with two 3" -3.5" diameter holes in it to allow air to enter the engine compartment . I know of two other 1973 dart sport 340 cars that I worked on in the...

you will have to calibrate your speedometer gear, if you change your gear ratio.

saw this on craigslist, thought someone here may want this for the powertrain: http://washingtondc.craigslist.org/mld/pts/543200176.html