Search results for query: *

Is the upper ball joints the same size on the drum and/or disc on a '73 A body? or is the drum the small ball joint and the disc the large?

Anyone know how much I should torque down the camber bolts in the upper control arm bushings? I can't find it in my service manual.

I have a 1970 Dodge Dart custom sedan w/225 slant. I have been in the process of changing all the suspension this past week...the leaf spring bushing are holding me up. I've ordered them twice from different places and I keep getting the same size. The problem is the leaf spring eye on mine is...

Is the center link/drag link the same on '70 compared to a '73? The reason I ask is I'm really close to installing a Firm Feel suspension kit for a '73+ disc setup on my '70 Dart which uses '73 tie rods, lower ball joints and idler arm. I just want make sure I have all the right parts before I...

Is there any rebuild kits for '73 and up single piston calipers? The reason I ask is I would like to get the calipers powdercoated and I would have to take them apart for the oven part...

Anybody know if there is any difference in the control arm bolt and nuts between the 70' and the 73'+? The reason I ask is I'm going to a classic car junkyard that is walk in only to get some parts for the Disc swap and I want the right size tools...I dont want to carry more than necessary. I...

Ok so my car starts up fine with two pumps of the gas pedal when its cold but it runs rough with the choke closed,like its misfiring...the car shakes like crazy until its warm. Once its warm the curb idle is smooth and warm starts without pumping the gas. Any idea of whats causing this?

So I named my car Betty and since she is gonna be black in the future...the theme song for my car Black Betty-by Spiderbait... lol anyway I started painting and fixing things in the engine bay. The plan is to turbo charge it in the future.

I bought the Dorman parts 492-023 and 492-024 from Rock Auto with min qty of 5 ea. If anyone is interested I am selling the extras for $4 a pc. Plus shipping. I paid more than that but I don't need the extras. I have 3 of ea available .Pm me if you're interested.

Does anyone know of any links or info on how to mod a wastegate on a cummins turbo to run a lower psi?

How do you remove a windshield without breaking it? Also transporting? I found a junk yard with a windshield and it's cheaper to take it out yourself.

Has anyone run a full manual 904 on a daily driver? I don't mind shifting all the time. Pros or cons beside the shifting constantly? Also I only drive about a mile round trip each day to my job.

Does anyone know if there is a car other than an a-body with the sbp 14" that i could get a wheel to use as a sprare wheel? or maybe a larger set of steel wheels that would work on my 70' dart custom? There isnt alot of parts car a-bodys in my area.

Is it necessary to have the breather vent into the air cleaner ? I wasn't sure if I got a breather w/o a vent line to the air cleaner, if that would cause any problems?

My car sometimes wants to "run" after I turn the key off. What causes this?

Ok my speedo starts bouncing around at 55 mph. Is the speedo bad or just the cable?

I have a 70' Dodge Dart with a 225 /6 and 904 tranny. When the car is in drive I have a wierd rumble coming from under the car. It comes and goes and is very noticeable when idling at stoplights. Any ideas what this could be?

Has anyone made their wipers intermittent? If so ...how?

How do I get to the heater core to change it ? On a 70' dart non a/c

I just started having my transmission start slipping from 2nd to 3rd. The car has 150000 miles on it and and I think its leaking tranny fluid ,because I keep on adding more trans fluid every couple of days.Would changing the filter help with the slipping problem? Or should I start looking for a...

Does anyone know where I can find door seals for a 70' Dart 4 door? And is there a difference from the 68-69 window seals for the 4 dr?

Anybody know where I can find door seals for a 70' Dart 4 door?

When I drive my car over 50 mph it starts vibrating. Any ideas what could be causing this?

Does anyone know the stock replacement valve part numbers for Autozone or Napa? Also what are the dimensions?

What should the stock compression be on my slant 225? I'll be doing the compression on my car for the first time tomorrow .I've never done it before and I'm assuming it can be done with one person?

My 70' Dart hood doesn't sit where it should.....the front seems fine other than if you push one corner down the other goes up. But my issue is the back of the hood sticks up higher than the fenders and vent area...is there a way to adjust the hood to seat properly all the way around?

What is the length of a slant six dipstick? Mine is broken and I'm gonna try making a cable style. Also how far up from the bottom of the stick is the full line?

1. Why is my 1920 holley backfiring in park when I try to rev it? 2. When I'm driving down the road it barely accelerates ,top speed is 40 mph even if I have my foot in the floor it just revs up but doesn't really go any faster. Any ideas? It does seem to shift when it suppose to. I just...

What transmission does my 70 Dodge Dart Custom come with?

Anybody ever taken the knob off to get the latch off? I'm trying to remove the fake woodgrain panel off the glovebox but the only thing at this point holding it on is the knob.