Search results for query: *

65 gt convertible 273 project In Stockton California 95205 asking 2k The sale fell through due to unforeseen circumstances on the buyers end so I'm listing this again. 65 gt convertible, automatic 273 car. have almost a complete project. My dad is to old to finish and it's just sitting in the...

ok the car was media blasted and has been sitting in my dads garage for 10+ years. it has some small rust spots that need addressing but most of it is already done or has the metal section to patch it with the car. Has 2 hoods, deck lid is prepped and ready, fender and doors are prepped and...

Located in or around california, looking for a driver no rusted out junkyard cars must at least be drivable. 2 door preferred and 4 door ok, no convertible or suburbans. modified ok, price range 3 to 6k

Looking specifically for a 4 door, v8 interior isn't super important. Prefer a v8 but a solid 6 cyl car is ok. specifics in California preferred, no bad rust problems, running 318 or la preferred. driving is a MAJOR plus Paint doesn't matter a solid frame and body are the most important. No...

testing the waters, possibly up for grabs 56 Plymouth savoy, rebuilt carb and alternator swap. v8 car. everything works and comes with ton of NOS parts thinking of trading for a 67-72 dart/demon or possibly 65 fury or B body. what do you guys have to offer? no none mopar has to be a running...

So here goes helping my friend Moe find her first mopar. She was in an accident this friday totalling her car, thankfully she is ok and it was the other drivers fault. Now she has loved my 72 dart for over 9 years and wanted a dart for a long time. What she is looking for- It has to Run, and...

I have an enderle bird catcher that has been powdercoated green. UNMODIFIED Comes with butterflies and linkage. $400 PM me

I'm looking for a good 72-75 D100 stepside pickup in California for around 1 to 6k I have a 62 bug I would want to trade for it with a new motor build and tons of new parts, but I can add or do just cash too though the bug needs to go to make room for the truck. Needs to be 4 speed 2wd with...

Motor is a 360 with 340 race heads from edelbrock, edelbrock flat plain intake 750 proform. I've jetted up the front and back to 76/82 respectively. Replaced my powervalve, and cleaned the idle nipples up top and also moved the timing around. As well as putting a new coil, plugs, wires cap and...

I need an assembly to put into my daily driver. My pedal set up is badly worn and I don't have the time to try and rebuild mine. Looking to spend around $175 to $200 I just need the pedal setup I have the connection rods and such already. Feel free to post pictures here or pm them to me. Please...

I'm looking for replacement for my drivers side shorty header mine won't stop leaking I believe with everything I've tried that it's warped. I have a 72 dart swinger manual steering I will buy a set if need be.

Will they fit in my A body with B body tracks? I didn't see any answers when I searched, my apologies if i missed it.

My dad and I got ahold of a 340 duel scoop hood with stock hood pins at a swap meet last week the problem is it just has the holes in the hood and the chrome trim for them not the pins themselves. Does anyone have some for sale or know of somewhere that reproduces good ones? As always thank you...

looking for a front valance, green preferably in driver quality. Thank you gentlemen and ladies.

Crashed my 72 swinger, looking for local or close parts for repairs. Located in Stockton Ca. parts needed- Hood, drivers fender and extension, front bumper, valance, grill, headlight setup/ bezel whatever the word for it is, bumper bracket. Pm me or post on here with prices and thank you in...

It's tax return season and I wish to buy a supercharger, it's for a 72 360 motor almost stock with a bit of cam- looking for like new the charger and pulley if available. Your parts your price, post here or Pm me with more info please!:burnout: I have an offy houser intake I want to modify to...

My 318 needs new guides and seals as far as I know-it's passing oil. I figured I would look to see if anyone on here is selling some 360 heads to replace mine since the shop will probably charge me just as much to rebuild my heads as buying some will cost. I am located in CALIFORNIA 95215 and...

I have a 72 Dart and I have recently installed an A833 4 speed. The rear end I have in it is a 7.25 and I saw the post about how long the driveshafts are supposed to be but the combination of 4 speed and 8.75 was not posted. I need to know how long to have my drive shaft cut down. I also had my...

I need a set of the plates the 8 3/4 brakes set on. Local pickup or local shipping for Stockton California.

Hey guys im currently half way though swaping in an A833 and the pilot bushing i have for my 318 won't fit???? :banghead: I searched the forums but i can't seem to find anything on this.

I need a 4 speed floor hump for my a833 swap local would be best due to finances, used also a plus- Pm me or post here. You guys have been great thank you for the help and parts fellas

I have my 72 swinger up for sale/trade for $2000 or a 4 speed swap. My transmission in my daily driver went out yesterday so i really need a new transmission! Let me know if you are interested, If you would like pictures of the car its in the mopar car sales section posted under 72 swinger.

I need a good set of U-bolts and backing plates to finish my 8 3/4 build! Sadly my dad threw mine away on accident! BUT! has offered to buy me a new set! If any of you local California/Stockton folk have a good set for a good price post and let me know or Pm me- tyvm for your time :glasses7:

Up for sale is my 72 swinger roller I have a motor and trany also if some is interested, they are not currently in the car- the body is is great condition my only real peeve is that the previous owner shaved the door handles. Its current on its tags and registration is on a current none op. the...

I am willing to pay for shipping but picking some up is easier :) I am located in Stockton Ca 95215- they don't have to be fancy just small bolt pattern and in working condition- -notice- I am swapping them onto my drum brake 72 swinger with 14 in rally wheels on it, the brakes must fit it...

Hello guys. I am currently looking for a set of 340 exhaust manifolds for my 72 swinger, it currently has a 318 in it. My price range is around $150 leme know if this is to low i was talking to a guy in the chat and he said he had a set shipped for that but they needed sandblasted and paint-...

I need some headers to go with the new motor im putting into my 72 swinger Its equipped with- 318 small block with AC, Power steering I need headers that have no modification required does anyone know if these will fit? their website says they will but i know how ac and "sure it will fit"...

I got ahold of this 4 speed, was wondering what it was out of originally, and what it could be used in thanks for the help fellas~

ok here is my list I am currently looking for all for my 72 swinger 318 8 3/4 posi set up also will buy any posi set up be it 7 1/4, 8 1/4, i need a posi badly! 4 speed pedals pedal linkage rods z bar the larger bell housing to fit the 11+ inch clutch clutch fork bucket seats- green...

Hello fellas, my radiator in my 72 318 swinger has a hole in it i need a replacement if anyone near Stockton, CA has one! I can't really drive very far to come get it or pay to ship it due to being laid off of work atm. I was also looking for the front passengers side bumper bracket but with the...