Search results for query: *

@VOETOM Please clean out your inbox, I’m trying to send you a PM! Thanks!

Stolen battery after parking in my driveway overnight…… sucks but looking forward not back. They didn’t cut the cables but I can’t find one of the hold down hooks and the other is bent pretty bad. I need one (but would take two) battery hold down hooks. This is a pic of the good one, the...

I know this is a B body question, but here goes. I have been given a set of front disc brakes off of a 1970 'Cuda. I want to convert my 1967 Satellite from drum to disc. The 70 'Cuda front discs use the two-piece rotor design and I want to use the later ('73 and up) unicast rotor. Does...

I'm looking for a pair of A-Body disc brake spindles. I just need the spindles, nothing else. PM me with your price and a shipping quote to Kansas City, MO if you have a pair for sale. Thanks!

This would have Walter P. Chrysler rolling over in his grave. As if the Chinese don't already own enough of America. China's Great Wall confirms interest in Fiat Chrysler

I have a 1967 Barracuda with a radiator that has been repaired so many times it looks like a piece of swiss cheese. I think it's just time to look for something in better shape. If you have a 1967 22" radiator that will fit my Barracuda without the automatic transmission cooler and can be...

I have a 1967 Barracuda that came with a 9 1/2" clutch disk and Auburn style pressure plate. During an engine rebuild, I went with a 10" clutch disk and Borg & Beck style pressure plate I got from a clutch shop here locally. That new pressure plate is plenty stout and I'd like to replace the...

Due to a noticeable lean to the right, I'm going to be ordering new rear leaf springs for my 1967 Barracuda. I have approximately 13/16" lean to the right when compared to the left side. I measured from the top of the arch on the unibody down to the top of the axle housing. You...

I need an original fuel sending unit out of an E-Body. My 1971 Barracuda has had three of those "remanufactured" Chinese junk sending units and none of them work. I'd like to have an original one rebuilt to see if that fixes my gas gauge. I'm in Kansas City MO if you have something, please...

Anyone within driving distance of Kansas City have a 1967 date coded 318 engine block? PM me if you have one at a reasonable price. I have already bought two 273 blocks from people (nobody on here) that turned out to both be trash. I have way too much money into this engine replacement, just...

Anyone close to Kansas City have an intake manifold for my 1967 Commando V8? I'm looking for the original single plane manifold that went with the Commando engines. My engine is a 1967 model so I would like to have one from the later model so I don't have head bolt angle issues. Please PM me...

If you have a 1967 model year rebuildable 318 engine for sale at a reasonable price and are near the Kansas City area, please PM me. Thanks!

I got this intake from a guy along with a bunch of other car stuff from a neighbor who was cleaning out his shed. It's a dual plane intake and looks like a small port (273-318) piece. There are no identifying characteristics like the Pentastar, firing order, cylinder numbers or other tidbits...

I'm considering pulling the trigger and getting on the Passon A855 list. However, I'm running a 67 Barracuda with a 273, 4-Speed that originally came with the Auburn style 9.5" clutch. I rebuilt the engine and installed a new Borg & Beck style 10" clutch because all I had to change was the...

I have a 1976 Barracuda Convertible with a bad block. I'd like to find a "C" block to replace it with. I have the heads, intake, exhaust manifolds just need a block. PM me if you have something. Thanks!

I'm going to add relays to my convertible top like in the following attachment available on this site. (Thanks wjajr!) I would like to make this as much "plug & play" as I can. Is someone parting out a 1967-69 convertible and would be willing to sell me the male and female connections (with...

This is not my car. I just saw this ad cruising through Craigslist. Located in Joplin MO. Looks like a decent car. http://joplin.craigslist.org/cto/4184488588.html

My buddy has a hot rod and has a Tuff Stuff 7509/7930B charging setup. I'm not real familiar with this type of charging system but from what I can figure out it is some type of Chevrolet inspired one-wire setup. Anyway one of the shop guys took the alternator off to replace the bearings and...

Does anyone have a left front sway bar bracket for a 1967 Barracuda? It's like the one pictured. Please PM me a price if so.

I need the two bolts that hold the lower ball joint to the steering knuckle. I have a 1967 Barracuda that I have converted to disc brakes from a 1974 Duster. If anyone has a pair of these bolts including the nuts, please PM me! Thank you!

I'm working on a 1969 Barracuda. It looks like the IVR has been pulled from the cluster. If anyone has one they'd be willing to part with please let me know. I really don't even care if it works, just need an old one to try.

I have a 1967 Barracuda that has a smashed front swaybar bracket on the right hand side. If anyone has one of these for sale, please PM me.

I need to replace the water pump on my 273. I have been to O'Reilly, AutoZone, NAPA and CarQuest and every water pump they have on the shelf for my car looks like the one in the first picture. It has that extra boss (see red circle) cast into the front of the water pump. In addition it also...

OK I hate to try and describe something without a picture to go along with it. However, I'll give it a shot and if I can find something similar I will update my post. I need a couple (two) electrical connectors that fit over the end of a screw used for an electrical connector. They are...

I'm installing a set if disk brakes on my 1967 Barracuda. I have it all figured out but the flexible brake hose. My inlet for my caliper is near the top front and the hardline mount is in the rear. If I go to NAPA the disk brake hose for a 1967 Barracuda looks nothing like what I need. I...

I have a 1967 Barracuda with a 273 and need to find an original fan shroud for it. It has a 22" radiator and a solid drive 7 blade 18" fan. I have another fan shroud I picked up at a junkyard off a 1971 Dart thinking it might fit. It comes close but hits the top of the shroud. The opening...

I have a 1967 Barracuda Convertible. It has a power top and the switch will not actuate the motor. I have done no testing to see if I have power to the switch or motor because I'm thinking this thing has to be fused somewhere. I did stick my head up under the dash just long enough to find...

OK, I know this is an E-Body question, but you guys (and gals) are very good at answering questions I decided to post it anyway. I have trouble shifting my A-833 transmission. It will hardly go into reverse, I have a hard time getting it to come out of reverse as well. One time I drive it I...

I'm putting new leaf springs on my 1967 Barracuda and thought while I was under there with everything apart I'd try to find a factory sway bar to bolt on. I would need everything, the brackets that fit between the spring and axle for the link ends, the brackets that mount to the body and the...

I have a 1967 Barracuda with the 273 engine. The temperature gauge has never worked. If I ground the purple wire that runs out to the sending unit the needle moves all the way to Hot and beyond. This weekend it was nice and I went for a cruise. The temperature gauge never moved off of cold...