Search results for query: *

  • Users: mopowers
  • Content: Threads
  • Order by date
  1. mopowers

    [Found!] Side mirror needed

    I'm looking for a twin post side mirror (#2255521) for an early Dart. Must be in good shape with a tight ball joint and I'd need it shipped to 95691. Let me know if you've got one laying around. Thank you!
  2. mopowers

    Sealed Beam Headlights

    Are there any sealed beam headlights on the market that are worth a ****? I know the GE nighthawks were decent until they outsourced to China, but are there any others currently in production worth buying?
  3. mopowers

    [SOLD] Aluminum BB Water Pump Housing

    New big block aluminum water pump housing - $70 + shipping (Paypal F&F, postal money order, or check will work). Located in West Sacramento, CA. PM me for a shipping quote. I'm guessing it'll be around $20 or so.
  4. mopowers

    64-66 Dart GT Question - cat whiskers

    For those of you with a '64-'66 Dart GT, can you do me a huge favor and look at your front window sweeps (cat whiskers). Are the front inner and out cat whiskers supposed to be the same length? I just installed a set on my '66 Dart and I feel like the outer one should be about an inch longer.
  5. mopowers

    [FOR SALE] BB Cast Iron Water Pump Housing

    Cast iron big block water pump housing. #3698468 casting with passenger's side radiator hose. It's pretty crusty and will need a good clean up. $45 shipped from West Sacramento, CA (PP F&F, postal money order, or check). Or $20 local pick up.
  6. mopowers

    [FOR SALE] 46RE Slip Yoke

    I picked this up for a A518 swap, but turns out my non-lockup A518 takes a regular 727 yoke. This was used with a 46RE. Not sure if it'll fit later lock-up 46RH's. Uses a 7290 u-joint. $40 shipped from West Sacramento, CA (PP F&F, postal money order, or check). Or $20 local pick up. If desired...
  7. mopowers

    46RH Slip Yoke Trouble

    I picked up a slip yoke for my 46RH today at a local auto wrecker. It came from a '95 Ram 1500 (2WD 5.9) w/ what looked like a 46RH/RE. It had a 2-piece drive shaft for what it's worth. I figured that slip yoke would work on my non-lockup 46RH, but it doesn't quite want to slide on. It'll start...
  8. mopowers

    46RH/RE Yoke Questions

    Does anyone happen to know what size u-joint a stock 46RH/RE slip yoke uses? Are they 1310 or 1330's?
  9. mopowers

    Trunk Lock Orientation

    Are the lock cylinders for the decklids on these A-bodies supposed to be oriented with the pins on top or bottom?
  10. mopowers

    [Found!] Window Crank Screw

    Anyone have an extra window crank/door handle screw laying around. It's off a '66 Dart, but I'm sure they're pretty universal. They're about 3/4" long and have an allen head. I seem to be missing one. Thank you!
  11. mopowers

    [Found!] Decklid Torsion Spring Clip

    Anyone have any extra one of these clips for the trunk torsion springs laying around? Thanks!
  12. mopowers

    Where do these gaskets go?

    I'm putting the back end of my '66 Dart back together and I think I must be losing my mind. I realize these round white foam gaskets are for the rear bumper, but where exactly do they go? Do they go between the brackets and the mounting points on the car? Other than the two out ones that...
  13. mopowers

    46RH Converter in 727?

    I picked up a non-lockup 46RH a couple weeks ago and it came with the torque converter that was with it (originally from a '92 Ram w/ 5.9). Can I use this converter in a 727?
  14. mopowers

    VIN Rivets

    Do you any of you guys have a source for the rosette rivets for the a '66 Dart? Obviously, these are attached in the door jams, so I'm unsure if they are the same rivets as the later model A-bodies that seem to be the rivets that the resto shops like ECS carry.
  15. mopowers

    Canadian Shipping Fees/Taxes

    I'm considering purchasing a car part from someone in Canada (I'm in California) and am trying to figure out how the fees/taxes work so I know how much I need to pay him. Will I be charged customs fees when the item is delivered? If so, how are those fees determined? Also, does Paypal...
  16. mopowers

    Battery Lug Terminals

    For those of you who make your own battery cables, what ends do you use to terminate the cable on the battery end and connect it to the battery? I'm trying to find a clean, reliable battery lug end for some cables I'm making and looking for some ideas. Thanks guys.
  17. mopowers

    Small Max Wedge Hood Scoop Source???

    Does anyone know who makes a smaller version of the max wedge hood scoop? I saw one that looked awesome on a '66 Dart yesterday at a car show and the owner couldn't seem to remember where he purchased it from. For some reason, I'm having trouble finding this smaller version anywhere. Here's the...
  18. mopowers

    Paint advice needed

    I'm prepping the jams and trunk on my '66 for paint and was wondering what product(s) would be adequate as a substrate for the 2K urethane single stage that I ultimately plan on shooting as a topcoat. I'm not stripping the door jams completely but have sanded through to bare metal in spots. Can...
  19. mopowers

    [Found!] '66 Dart Tail light Lens

    I'm looking for a driver's side inner tail light lens for a '66 Dart to replace my cracked one. With or without the chrome trim piece is fine as long as the lens is NOT cracked. Here's what it looks like (below) and it should have the following numbers on it: D-29379LH 2575525. The housing it...
  20. mopowers

    '66 Dart Tail Light Lenses

    Just wanted to confirm - The taillight lenses on a '66 Dart are different driver's side vs passenger's side, right? In other words, all 4 lenses are unique?
  21. mopowers

    Rear View Mirror w/ Roll Cage

    Do any of you with roll bars/cages have a decent looking, non-obtrusive option for a rear view mirror?? I'm looking at some of the cage-mounted mirrors that are out there and they're all a little goofy looking. Most of them seem to be more for off-road rigs. I'd like to find something that has...
  22. mopowers

    42rh vs 46rh behind a 408

    I'm toying with the idea of redoing the engine/transmission combo in my '68. Currently, it's got a 340/727, but I'll eventually be building a 408. For a transmission, I'm trying to decide between a 42rh and 46rh. I'm leaning in favor of a non-lockup 46rh so I could reuse the current Dynamic 9.5"...
  23. mopowers

    14" x 3" Air Filter Application??

    Did any cars come from the factory with a 14x3 air filter? Say you walked into a chain auto parts store and didn't have a part number. What application could you give them to pull up a standard 14" x 3" air filter?
  24. mopowers

    Atlas/Craftsman Lathe Oiling for Dummies

    I bought my first lathe last year - an old Atlas Craftsman 12". Every time I've tried oiling the lube points at the small ball oilers, it makes a mess. I'm wondering if the tip on my oil can is the wrong tip for these ball oilers. Is this the wrong tip to be using on these tiny ball oilers...
  25. mopowers

    Mallory Electric Fuel Pump/Fuel Compatibility

    I was considering picking up a seal kit for my Mallory 140 electric fuel pump before these pumps and kits become obsolete and noticed they have two version of these kits - one for "gas" and one for "alcohol/methanol." The alky version is $42, while the gas version is $130. Mallory 29819 Mallory...
  26. mopowers

    Paint Experts: Process Advice Needed

    I've been cleaning up the inner sides of the deck lid/jam and doors/jams for my '66 Dart to get ready for paint. While cleaning them up and sanding the rough spots, I've sanded through to bare metal in some areas. Since I'm a couple months from actually shooting color on these panels, what's the...
  27. mopowers

    Air Fittings

    Do you guys use high-flow air fittings on your air system? I'm wondering if they're a worthy investment for some tools like hvlp spray guns and such.
  28. mopowers

    [Found!] '63 - '66 Dart 270 HT Drip Rail Trim

    I know it's a long shot, but I'm looking for a set of drip rail moldings for an early Dart 270 hardtop. I'm located in West Sacramento, California.
  29. mopowers

    Drip Rail Trim

    Does anyone make a simple trim piece that covers the drip rail on an early Dart hardtop? I eliminated all of the excessive (in my opinion) trim on my '66 Dart GT and would like to replace it with something that just snaps over the outer edge like what's on my '68 Dart, if something like that...
  30. mopowers

    Rear Window Trim Clips

    I've got two questions on these trim clips for my '66 Dart GT. 1. What type of sealer do you guys use on the screws for these clips? I think they were coated in some type of wax from the factory. Will a urethane seam sealer work? 2. What trim besides the rear window used these clips? I'm...
Back
Top