Search results for query: *

Summit racing double roller timing set for small block. Used maybe 10 minutes and pulled off. Has three key way slots for straight up, advanced and retarded. Asking $25 shipped

this is a generic pump that flows the same as the holley, flows 140 gph at 14psi, inludes fittings for 3/8" fuel line and a new never used fuel pressure gauge that goes up on the motor. this was only run for about 15 minutes or so before being removed. price is OBO

rebuilt this holley 600 and ran it for maybe 15 minutes, took it off and its been sitting since december i think. needs adjusted and tuned. has #66 jets in it. will also include the adapter for spread bore to square bore with allen head bolts to mount it. price is OBO

i have a fresh stock bore 318 with only about 10 minutes run time on it. bent two valves and pulled it. only the one piston has valve marks on it and they arent bad at all, i can show you in a picture if you PM me. i have pictures of one rod and one main cap off so you can see the bearings and...

I have three brake caliper cores for sale for the 73+ single piston brake system. They will for sure need a rebuild and a paint job. I think (dont hold me to this) i have two lefts and a right. Or two rights and a left. Looking for $35 shipped in the US for all three. Image is to large to upload...

Made by crane cams. These are the same 7.625 length as the mopar performance ones that are no longer available. 5/16 with ball ends with oil holes. Asking $70 shipped or best offer. Only about 10 minutes run time on them

489 case thats been hot tanked. includes the side adjusters and lock down tabs. asking $75 plus the ride but will cover any shipping charge over $25 (so you wont be in it more than $100 as i feel thats about what its worth) located in muskogee oklahoma 74403 will post pics soon if anyone wants...

one used set, good nut (perfect threads) and washer and a 10 spline yoke from a 489 case. i would run a tap through the yoke to clean any dirt from the holes. dont wanna trash it if someone needs it since sometimes we all loose those little parts lol would like $10 plus the ride or best offer...

pair or 340/360 spool type motor mounts for 73+ in good shape other than needing cleaned and painted. rubber is in decent shape. asking $60 shipped in the U.S.A below is a link to the part numbers on them which are as follows:3642819 and 3642810...

One good and ready to go 8 3/4 cone style sure grip. Press your bearings on and go. I had it disassembled and the cones dont appear to have bottomed out yet, also had it hot tanked and cleaned Hows $175 shipped sound? I hate to bump again so soon but i drive a 99 dodge ram 4x4 with a small...

One sway bar for a 72 down a body i beilive but will check for sure tomorrow. has the sway bar bushing brackets that mout it to the k-member an the end links although bushings are bad. Looks like a 40 year old peice of metal but not rusted or bent. Just flaking paint on it. Will post pics...

Ive always wondered why i was restless and didnt quite fit in with people my age around here. I have a history of depression and bi-polar people in my family and thought maybe it was affecting me slightly from time to time. I always lose interest in my projects at the emd and get rid of them. I...

What is the most i can shave off the 452's to raise the compression on my 78 440? I know the intake will need milled also but i want to slightly increase the compression without a $500 set of pistons lol

With troubles from bills winding down im starting to get hopefull for my next project. I have a 78 model 440 sitting on the stand and want something to put it in. Has anyone seen or done a 440/727 swap into a mustang? Lol i know i know. Why not use a ford motor or get a mopar body? Well i want...

One good and ready to go 8 3/4 cone style sure grip from a 489 case. Press your bearings on and go. I had it disassembled and the cones dont appear to have bottomed out yet, also had it hot tanked and cleaned so press your bearings on and go. Asking $250 shipped Didnt post pics because it...

i have a 489 8 3/4 case and cone type sure grip that i just had hot tanked, the gears and bearings shown are bad and need replaced. had the sure grip apart and it is ready to go as it hasn't bottomed out and caused the pits or whatever. the case is cleaned and has a pinion snubber. asking $425...

ive decided to part out my 70 duster http://www.forabodiesonly.com/mopar/showthread.php?t=211965 engine and transmission, transmission is unknown condition as it hasnt driven and i cant guarantee its good. specifics for the motor are in the link and is complete minus carb and intake, comes...

slant six clutch inspection cover. cleans up nice as i have wire wheeled it looking for any numbers, still needs a little more and a coat or paint $20 shipped:happy7:

one cleaned oil filter adapter for big blocks $10 plus shipping

one small block windage tray with no bolts. in great shape other than some very very very light surface rust on the edges lol cleans right off with a wire wheel but mine fell apart before i could get the edges cleaned $25 plus the ride from 74403

LT1 air cleaner for a camaro or corvette i think. has the sensor in it. not sure what sensor it is looks more like an air speed sensor to me but i dont know for certain. has a good k&n air filter (looks like it to me anyway) in it and is pretty nice looking. $40 shipped or best offer will take...

i have 3 cast iron four speed cases, all are in about the same condition and have no insides, make offers on them plus the rides i have 3 cast iron side inspection covers need cleaned. make offers plus the ride. also have 2 cast iron A body four speed tail housings both look good and need...

located in 74403 $25 shipped

located in 74403 $20 shipped OBO

http://tulsa.craigslist.org/pts/3429340887.html

Woke up this morning with severe "unhappy bathroom times" and was going every few minutes, then about an hour ago i woke up from a nap and felt sick so i threw up a couple tines and then wanted a shower, went to get a towel and dropped like a sack of rocks. Woke up to mom shaking me and asking...

Can a front sump 440 pan be truned around and used as a rear sump with the correct pickup? Bolt holes look the same but i didnt know if there was maybe a dimple or something different between them.

Just when i was telling another member how things were starting to turn around because of everyones generosity and the family coming together. Things were leveling off and getging caught up. 30 minutes later my 4 year old nephew that lives here with us is in the ER because of his fever being...

New set of sealed power moly rings for a 4.030 bore Part number e251k30 5/64, 5/64, 3/16" $30 shipped Located in 74403

one spindle for what looks like 73+ disk brakes. $30 shipped. would clean up well. all threads look good. price is OBO located in 74403