Search results for query: *

Hey all, I am going to be redoing my 72 date code LA360 hooked up to my 904. My concern is getting the combo correct as the external balance issue I see a lot of. I am looking at buying the following converter from Hughes. The 27-25, per the specs on Jegs, it shows the 360 application for 360s...

Hey guys so I recently purchased a 1969 close gear ratio abody 4 spd, pedal assembly and small block bell housing. got a pretty good deal from what I can see from what prices are on brewers performance. This is a entire new game for me and need all the advice I can get. my list I made of the...

basically new brackets from summit , aluminum and adjustable 20 dollars for both driver and pass brackets Will ship Located in Sacramento CA

I have a few items for sale. 72 rear bumper $20 dollars needs some work but driver quality 72 rear bumper mounts $10.00 has surface rust 72 pass side fender $60.00, has a dent in the middle the size of a grapefruit but workable no rust 72 front lower valance $20.00 67-75 rear window...

I have for sale a NEW in box never used pie cut flex plate for a 904. I had to use my orginal X style flex plate and this is sitting in the box and will not be used anytime soon $80.00 they cost $95 at summit PM for pictures and details, will ship located in Sacramento CA

Near perfect original material rear bench seat, has a couple abrasions and one piece of stitching coming out about a inch long. NO SUN FADE OR CRACKS in vinyl. Garage kept! Foam is not deteriorating! Has the Chrysler tags and numbers on the covers $200 PM for pictures and details, prefer...

Hey guys I have got her running finally! 72 LA 360 block 2400 stall by SMI eddi RPM Air Gap comp cam RV size cam ported heads Holly DP 600CFM Melling HV pump and shaft and pick up tube Miloden water HV pump from mopars in the park with my buddies and their 2 68 RT's

Hey guys so my car is done but i have my stock 904 2bbl kick down set up that won't work with my holley 4150/ eddy rpm manifold set up. I can switch it back to a eddy carb but I love my 4150 so would this cable work with my factory throttle bracket that bolts to my intake by not interfereing...

Quick question about the rocker arms, changing my covers today to Mopar performance ones and I noticed that the rocker arms can slide very very very little on the shaft side to side. That's normal? I bumped one and it moved guessing there is no pressure on it. My spacers are in the correct order...

hey guys my 360 will be firing in a couple weeks for the first time and have to break in my new RV cam but the rest of the motor had 3 k miles on it. I got two t stats to choose from a 180 or a 195? car is not daily driven and will not be driven this summer during the hottest portion of the day...

Hey guys my local parts stores are a bunch of fools and can't seem to look up a hose for the upper and lower Running a 22in 3 core champion radiator can someone possibly get me part numbers to the hoses on a that set up?

Hey guys, just got my 8.75 a body rear end finished for my dart and Im shopping new rear leafs for her as these old ones are sagging bad like when i put a full tank in the car she has low rider mode come on lol. I am using the car as a weekend cruiser and little track time so I'm looking at the...

Original black material! has Chrysler tags on it, 250 dollars has some cracking in the material but I always kept conditioner on it to keep it moist. Otherwise its in excellent shape for 40 years old Also have a rear green bench in 8.5 out of 10 shape all original material with tags as well...

Got a rear window sitting and have no use for it, get worried one day I may get near it and break it by accident, rather see it get used. 50 dollars, no pitting or hazing and stored in the garage I will not ship it, local only in sacramento CA region Pictures upon request

I got a unmatched year set of fenders both sides though LH and RH side. I shaved the makers on my car so it did not matter to me for the maker lights. Both have zero mud on them and in original paint. One is off my car that has some damage that is repairable. I will post pictures when I can...

I'm a chemaphobe first off, I hate using them. I know that sounds weird even though I wrench. I was using brake cleaner to get some sticky residue off some chrome then used some polish and i was using nitril gloves but as nitril is, they tear easy over time with brake cleaner on them. I go...

Just a quick question, I need tranny cooler lines, have my 360 in the car mated to the 904 trans and my driver side header has fitment problems because my old twisted lines are in the way. I need new ones. I looked on year one and they only had them for 727 trans. You guys have any places you go...

So I took the plunge and bought buckets, summit brand with rails, The mounting holes center to center is 11 in where the car is at 12 center to center. my other question is, what did you guys do for the floor pan? Since it was set up for a bench and the pan is raised on one side near the door...

Hey guys, im so close to be dropping in my motor but im getting hung up on my torque converter/ flex plate problem, I bought a 360/904 B&M plate with pie cut out from summit and it should go right on but when I had my 318 converter done to fit my 360 /904 combo the balance weight is in the way...

Having bought a B and M quick silver shifter I must do away with the bench to make room for it on the tunnel. I just got my taxes back already so I got some fun money to put into the interior, I rather save some money but when you do sometimes you get what you pay for. Seats that are cheap...

I have the compressor, lines and dryer unit and it worked when I pulled it out, I have the condensor as well, it held pressure before I sucked the The refrigerant out, $500 for all of it 30 min from Sacramento CA PM for pics

Hey guys, trying to thin out my collection of parts, I have the following 70-72 trunk lid awesome shape with no rust and has lock and latch still with trim piece $100 Rear glass clear and no scratches or chips not tinted $150 front and rear bumpers $50 for the pair, both need work Stock hub...

I am selling my front bench out of my Dart all black vinyl, Couple tiny tiny age cracks and marks and foam is starting to collapse(not deteriorating onto my carpet) but not horrible on driver side otherwise mint! $400, looking for 70-72 buckets for it preferably black but green is OK too. I can...

Hey guys I know you get this a lot! but I was using the search and I was reading up on the TTI's and they sound a bit difficult to install? requiring mini starters or have to modify the linkage by cutting it and reshaping a bracket near the collector and taking the power steering completely out...

Hey all, found a set of virgin set (no heater plate crap) high flow manifolds from a 340 e/b body, will they fit a (A) body particulary the driver side? I have a power steering car so clearance is tight

Hey guys, I was on summit racings catalog and Im about to order a torqure converter, mild built 360,that will be used as a 3 day a week car. So something that is streetable but more than stock, what is a good stall for this 2600-2700? also what brands do a 360 904 combo that are reliable? I have...

Here are some pics of my first minor build. I did paint it Ford blue but, it just pops though Did a very basic cam, barely bigger than stock since I am goin to drive it 3 to 4 days a week, I did not do the springs since they only got a couple k miles on them and was told by 3 references of...

Selling our 99 k 3500, 66k original miles!! Has cosmetic dents and a scar in the passenger front portion of the bed from a crawling speed scrape with a pole, 454ci, turbo 400 , from sitting so much it has a leaky injector creating a hard start under warm starts, cold starts right up like normal...

I hate to sell my Darts original rear green seats but I am painting the car Plum crazy so green does not go so well and they take up space, They are all original, not dried out or cracking, hardly any sun damage, couple abrasions from being used or moved to my new house, couple small stitches...

Up for sale is one rear bumper off a 72 Dart parts car I once had and the bumper mounting brackets, the bumper is pitted and has a few dings but good for a driver or could be redone, the brackets look and appear straight and have light surface rust. 40 dollars for the bumper and 40 for the...