Search results for query: *

Car is sold.

Please see and reply to my ad on craigslist, I am not on ForAbodiesOnly frequently enough to stay on top of private messages. Thank you for looking! http://albany.craigslist.org/cto/4004321636.html

sorry i misunderstood what you were asking about the guides yws they were cut for clearence the springs were installed at 1.722 with max lift the springs are at 1.160 at .562 max lift comp wants + .60 to coilbind the spring chart say coilbind at 1.100 that puts me in spec if there is no lifter...

coil bind is at 1.100 iam at 1.160 at max lift bronze guides comps retainers i only go to the track twice a year its mainly a street car iam running groodrich drag radials my best time with old lifters was 12.5 at 104 i was 89mph at the 1/8 i had to shift at 5400 and still could not make the...

they are flat tappet lifters the cam is thexe275hl gross lift is 525 with the 1.5 rockers 561 with the 1.6 rockers they are cast pistons i have 4.10 gears and 26" tires with the old lifters it would not make it to the traps i had to let of the gas at at about the 1000 foot mark i dont want to...

iam running a comp cams hydraulic flat tappet cam in my 360 i purchased the cam kit with the high engery lifters iam running the mopar performence 1.6 roller lifters the motor would not rev over 5500 rpms i called comp they recamended the pro magum lifter they want 2" to 4" pre load with the...

iam curenlty running one i purchased used from a freind who purchased it new i dissasembed it myself it was a mess one wristpin was smaller than the rest bearing and rings were to tight a lot of scuffing ireplaced the rod bolts with arp had the crank polished the block alined honed honed the...

i have also used the tm7 the runners are a little different because of spacing for the intake bolts i would like to go to 6300rpms the block was decked and the heads were cut i have to take a 100'' of the intake sides so it gets costly to change mainifolds i have 410 gears i need about 6300 to...

i have a 360 crate shortblock with ported x heads comp 525hL cam with 1.6 roller rockers and the ld340 intake with a 750 quickfuel carb i run out of rpms early is anyone running the tm5 edelbrock intake or familure with this intake