Search results for query: *

I got this shifter from Summit I think. I got it because I bought a manual shift 727 auto. Well it wasn't manual shift so I went back to the column shifter. The cable hit the header pipe. It still moves freely but I'd get a new one and shorter if possible. I saw new cables for about $52 . I want...

I have a set of used speed pistons .040 over for a 360 for sale. I bought them from a member and never used them. With wrist pins. $50 plus shipping. H405cp 040. Check them our at summit

I put on the windlass molding and the top doesn't look right. Am I missing molding od have it assembled wrong. This is a 71 swinger

I put the windlace in and the rear window metal top but it just doesn't look right. Am I missing trim? This is for a 71 swinger

I just took off my trunk lid to make it easier to work on the torsion springs. is there a trick to putting them back on, and adjusting the lid?

I have a 71 swinger and putting on a spoiler. Are these cut outs it the trunk my guide?

I have a set of Mopar adjustable rockers with spacers for sale. No shafts. $75.00 shipped. Probable 273

I have a 71 swinger Can anyone tell me where the low travel adjustment screws are. I've got the rear panel off the top sill off. I just can't see them

I have a 71 swinger. The drivers side door is opened with a s shaped round rod flattened ends and a ball and clevis type clip. The passengers side is opened with a 5/32rod with a swing over clamp that clips on the rod. Do I have 2 different year doors or 2 different year latches or is this the...

Don't know what they're called but I need that S shaped link that connects the exterior door button to the latch so I can open the door 71 swinger 2 sides The car went to the painters and cane back without them

I have exhaust manifolds that came out of a 73 340 dart sport. It had a 318 in it when I got it so I don't know what they are. looking for $50 each OBO.

I have a rear window defroster looking for $75 plus shipping. just bench tested the motor and it works.

I have an alum edelbrock performer intake for sale. I never used it, went another way. No stripped threads, every things good. Just has been on the shelf a long time. $100 plus shipping Some pics oh sorry small block

Are the rear roll down windows supposed to roll all the way down into the body? I just put new fuzzies on and the window rolled down under it and ripped it off.

I have a small block Edelbrock water pump for sale. EDL 8877. never run Just bolted on and taken off. High volume aluminum clockwise rotatiom $150 plus shipping

I have rocker panel moldings for a 71 swinger. They are 2 7/8 wide. I don't know what clips I need. The ones that came off were big with a funny push in expandable plug to hold them on. I went to Lawson but they don't give any dimensions. Does anyone know? thanks in advance Jim

71 dart steering column floor shift manual steering. Directionals work flashers work no ignition switch no steering wheel. was using it but went to column shift $200 plus shipping

is there any difference between slant 6 346 and 360 shifting linkage? This sounds crazy but I'm not happy with my floor shifter and want to put it back on the column. I have some linkage but not sure what its from. I have the one from the shifter to the pivot linkage but not the one to the...

Hi guys I got the Moroso venturi PCV pipe and it has a V notch in it . When installed it looks like it will be right in the exhaust flow. does that sound right? Also the directions say to put it in the header collector. Has anyone put it in the header flange a little more down stream? The...

Was thinking of putting a tube in my exhaust pipe and relying on the venturi effect for my pcv valve any one else do this?

If you change out a 727 to a 904 transmission can you use the same driveshaft? I seem to remember one trans is shorter Thanks all

Who makes the thick metal center valve cover gaskets for 360 or small blocks and a sugestion for a good header exhaust gasket on the head? thanks all

Im putting a 727 back into my 360 Swinger Did some measuring and from the face of the bell housing to the bolt holes in the torque converter measures 9/16 in. From the mounting face of the block to the flex plate is 7/16. The converter is in as deep in the tranny as it will go. So that means...

I have a 727 behind a 360 in a swinger. The trans was just rebuilt by a tranny guy I trust. Its been sitting a couple months as I had to replace a heater core. I took it out yesterday and backed it out to the street put it in drive and when it got to 5 mph the back tires locked. The idle came...

I'm running a 360 with a purple cam ported heads RPM intake thermoquad carb. It has a electric and mechanical fuel pump. I'm still running the 5/16 fuel line. When I floor it it pulls great till 3000 and won't rev much higher. Another time I was crusing about 2500 floored it and it pulled...

Can a71 dart w/a 727 trans be towed 4 down? Its got 351 gears in the rear if that's a concern

I need a set of return springs for a bench seat that I think came out of a 70 scamp. Are they all the same? any one have a set

Is there anything I can do with the 4 extra vent.lines in gas tank Can I just connect them together or do they serve a purpose? This is in a 71 Swinger California car dart. Jim

I have a 71 swinger with front and rear sway bars I want to put air bags in it It has air shocks in it now but I don't like them . Anyone ever put air bags in an a-body? If so what kind and what was the application. Can't find any one woo makes a kit for a-body air bags Thanks Jim

looking for rocker panel moldingfor a 71 swinger driver thanks Jim