Search results for query: *

  • Users: 1994redram
  • Content: Threads
  • Order by date
  1. 1994redram

    [SOLD] 225 slant complete and running

    I pulled the engine out of my '69 D100 truck to do a crown vic front suspension swap. The truck was running and driving two weeks ago. I've drove it all over town and some highway trips since I bought the truck last February and have had no issues with it once its warmed up. The choke auto choke...
  2. 1994redram

    [FOR SALE] 1969 D100 truck

    I have a 1969 D100 for sale/trade. I bought it as a non runner and planned to restore it. I've since decided that I want a shortbed. I've replaced a bunch of parts and it runs and drives now. The truck has a 225 slant 6, 727 trans, and a 8.75 rear axle with 3.55 ratio. The fuel tank was rusted...
  3. 1994redram

    Coolant temp gauge problem

    My dart is in “paint shop prison” so I bought a ‘69 D100 to play with. It’s a Mopar and pretty similar to A bodies electrically. I’m hoping you guys can help me. My gauges didn’t work, I bought a digital IVR from a member here. I disabled the failed internal regulator in the fuel gauge and...
  4. 1994redram

    [Found!] Slant 6 carb

    I bought a '69 D100 today. The carb has been modified and rigged. I'm looking for a good core to rebuild or use for parts. It's a 1 barrel Carter auto choke carb. I'm located in Oklahoma so it'll need to be shipped.
  5. 1994redram

    [Found!] 1971 Rallye dash

    Looking for a rally dash frame for a '71 Duster or Demon. Would also consider one from a '67 Barracuda. Looking for a frame or a complete dash with A/C bezel.
  6. 1994redram

    [WANTED] 1971 rallye dash frame

    Looking for a 1971 Duster or Demon rallye dash frame. I would be interested in a complete dash for an A/C car. Shipped to Oklahoma.
  7. 1994redram

    [SOLD] Champion 22" radiator, shround, and fan.

    I had this installed on my '70 Dart. Used it for almost 2 years. I had weird cooling issues on my new 408 so I swapped the radiator and fan out. Still had issues and eventually found an old freeze plug in the water passages was causing an obstruction. Nothing wrong with this setup. Cooled my...
  8. 1994redram

    Rallye dash knob radio

    I've had my '70 dart project sitting on the back burner the past year or two. I've recently started working on the car and I want to get the interior sorted out. I would like to switch from my standard dash to a rallye dash. I already have a retrosound radio installed, it's a knob style radio. I...
  9. 1994redram

    Transbrake/launch control button

    I am wanting to put a button on my steering wheel to control the launch Rev limiter on my Sniper EFI. My Dart is a full interior streetcar that sees the track a few times a year. I have a factory Tuff wheel in my car and I would prefer not to damage it by drilling holes. It's looking like that...
  10. 1994redram

    [FOR SALE] 72 340 distributor

    I swapped to Holley EFI with timing control so I no longer need this distributor. I bought this awhile back from @halifaxhops as a rebuilt factory unit. I installed an Accel HEI module using a nice machined heatsink/bracket that mounts to the bottom of the distributor. I ran it like that for...
  11. 1994redram

    Sniper EFI with nitrous control

    I'm wanting to try and break into the 10's this year. I think nitrous is the easiest and cheapest way to do it. A 10.99 would be fine with me and I think my combo is capable of that with 100-150 shot of giggle gas. I have a holley sniper efi on my car. Im not sure how the nitrous control works...
  12. 1994redram

    [SOLD] 6.1 Hemi longblock

    I won't be using this engine anytime soon and I need the garage space. I dont know the mileage or history on this engine. It spun the number 7 and 8 rod bearings. Ive pulled a couple other rod caps and those bearings look perfect. All of the rockers, pushrods, lifters, timing chain, tensioner...
  13. 1994redram

    408 Magnum stroker running hot.

    I have a 360 magnum based 408 in my 1970 dart. I've been fighting it this summer trying to make it run cool. Its a .030 over with about 750 miles on the build. I have edelbrock heads running with a 234/238 @.050 hughes cam. Its calculated at 11.5:1 compression. I had a demon 750 carb on it and...
  14. 1994redram

    Mechanical advance spring.

    I'm currently installing an FBO limiter plate into my factory electronic 340 distributor. I pulled it apart pretty easily but noticed that its missing one if the advance springs. Is that normal on some factory setups?
  15. 1994redram

    727 pump/input shaft change.

    I rebuilt a '79 model non lockup 727. I put billet servos, red clutches, red bands, CRT manual valvebody, etc into it. I had a new pump here and decided to use it. Upon starting it, I have reverse but no forward gears. I compared the '79 pump with a '74 pump I have and noticed a BIG difference...
  16. 1994redram

    Forward 727 valvebody

    I've supposedly got a TCI valvebody in my 727. The trans builder put the and several parts into my trans. After giving him two chances to fix it, I tore I to myself and built it. The valvebody has no markings on it and it looks like a used old regular valvebody with a modest shift kit in it. The...
  17. 1994redram

    [SOLD] 8 3/4 3.55 Sure Grip Diff.

    I have a 741 case 3.55 sure grip I just pulled out of my dart. The gears do make whine. I'm not sure why or what is causing it, thats how it was when I got it. The pinion seal leaks and will need to be replaced. The suregrip worked great and the diff is useable as-is. I removed it to install a...
  18. 1994redram

    [SOLD] Holley EFI fuel pump.

    I bought a Holley sniper EFI kit with the fuel system included. I ended up going with a Holley in tank fuel pump instead. This pump I have for sale will work for most aftermarket throttle body EFI systems. I have the unused pump with mounting brackets and the Wix pre pump fuel filter. I also...
  19. 1994redram

    Coil mount ideas

    Hey guys, I'm looking for ideas on mounting the coil on my small block. I have a 408 magnum in my 70 dart. I had an edelbrock dual plane intake on it and I had made a bracket to mount the coil on the back of the intake right next to the distributor. I am swapping to a single plane M1 intake...
  20. 1994redram

    Intake choice for a 408 Magnum.

    I have a magnum based 408 in my dart. I'm hoping to start installing my Holley Sniper EFI pretty soon. It's an 11:1 compression engine with some edelbrock magnum aluminum heads. The cam is a Hughes engines .571/.576 lift and 234/238 @.050. It's a street/strip car, never gets used for daily...
  21. 1994redram

    Thermostat spacer

    I ordered a Holley Sniper EFI to put on my magnum based 408. The street demon carb has treated me well but I've had the itch for an EFI conversion for awhile. I'm currently running an Air Gap intake on the engine with all of the factory magnum accessories. The two coolant ports are being used...
  22. 1994redram

    Anybody here mess with Mopeds?

    I was headed home last Sunday after church with my wife and kids and came across a moped that someone threw out on the curb with some other trash. I went home, hopped in my truck and went back to get it. I don't know much about mopeds but I know enough to make one run! Me and a friend patched...
  23. 1994redram

    727 fluid level

    I've researched this topic all over but never found a sure answer. I installed my 727 about 2 years ago and used a Milodon braided stainless dipstick. I put a transgo shift kit in it and a 2800 stall. The engine made 304 HP at the wheels and it went 12.80 in the 1/4. It NEVER felt like it...
  24. 1994redram

    [FOR SALE] 5.2/5.9 Magnum van power steering bracket

    I have an extra power steering pump bracket from a 5.2 magnum from a 90's Ram van. This bracket sits the pump lower than the more common truck bracket. That allows the pump to clear the stock battery tray on an A body. This is a bolt on part and should fit all small block magnum engines. I also...
  25. 1994redram

    [FOR SALE] Fresh rebuilt 340

    Im relisting this due to my last thread getting locked from inactivity. I'm helping a friend sell his 340. Its freshly rebuilt by a local machine shop. He has receipts on the work done and on most of the parts. The block and heads were cleaned, crack checked, and pressure tested. The block was...
  26. 1994redram

    [FOR SALE] Fresh rebuilt 340

    I'm helping a friend sell his 340. Its freshly rebuilt by a local machine shop. He has receipts on the work done and on most of the parts. The block and heads were cleaned, crack checked, and pressure tested. The block was bored, honed, line honed, decked, new cam bearings, new freeze plugs...
  27. 1994redram

    Trying to repair my ECU.

    This isn't an A body but it's still mopar. So last Friday I found (what seemed like) a great deal on one of my dream cars, a Viper GTS! I looked at it and decided to buy it knowing it had a misfire and ran rough. It's pretty clean for its age and only has 34k miles. It had the original plugs...
  28. 1994redram

    4 door parts on a 2 door

    There is a 4 door '68 dart for sale locally that my friend is looking at. He needs a hood, front bumper, and trunk lid for his '69 two door dart. Is the front clip same between a two and four door? Is the front and back glass the same?
  29. 1994redram

    Anyone know what this "tool" is?

    The mechanic at work bought a bunch of tools from a lady. Her husband passed away awhile ago and she wanted to clean out his stuff. He got two of these tools in a small tool bag and has no idea what they are. A Google search didn't bring up anything either.
  30. 1994redram

    340 crank identification.

    My friend bought a couple 340's awhile back. They are all in pieces and he has sent the 2 blocks, x and j heads, etc to the machine shop. One of the cranks is obviously not OE. He measured it and it appears to be a stroker crank! I'm going over to his house tonight and I'll check it out while...
Back
Top