Search results for query: *

Hey guys and girls, I am looking for a 67,68,69 barracuda flip gas cap patch panel and filler neck. I’m in Hollister Ca. 95023. Would like to convert my dodge pick up to flip gas cap and relocate gas tank. Thank you all!

Hey guys did a 5.7 hemi swap. Truck runs great, just looking to do some tuning to get to run right. Running a Holley Terminator X, any one in the California Bay area?

Hey guys, looking for a transmission tech that can help with 46rh issues, after a year of running I’m getting early shifting, won’t down shift when slowing down and coming to a stop, transmission acts as it wants to stall at a stop, then downshifts late at stop and idles fine, when driving at...

Setting up timing on my Holley terminator x, ignition timing is set at 15°, timing at idle is 12°, timing at cruise is 35.3°, and ignition at WOT is 12.0°. Stock fuel injectors, does this sound about right?

Good morning guys, did a Gen III hemi swap on my POWERWAGON, ‘13 5.7 Hemi. Went with a 92mm Holley sniper cable throttle body and Holley sniper fabricated intake manifold. After setting software and firmware, went through the GCF wizard for a base calibration. Engine fired up after few cranks...

Hey gang. Selling a FLIR C5 Wi-Fi camera and Rack a Tiers inspection Wi-Fi camera with LED light. No longer need and time to let go. They came in handy in my field of work electrical automation. Asking 500 shipped.

Good morning gang, selling some tools from the trade (electrical). These are tools I no longer use and time to pass on. Fluke 87III, Extech laser tachometer, and an Ideal 61-520 3 phase rotation meter. They are in working order. Asking 160 shipped.

Hey guys and gals, selling misc parts off my 71 POWERWAGON, just sitting collecting dust and have no need for these parts. Headlight rings that are in very good shape, no dings or dent, just a few scratches. Window cranks (4) that came came off my crewcab (went power windows). Parking brake...

Hey guys and gals, selling my brand new, electric Holley Red Fuel Pump #12-801-1 max pressure is 7 psi at 12v/2 amp draw and Mopar Voltage Regulator P-3690731, all never been used. Asking 150 shipped, from Hollister Ca. 95023.

Hey guys and gals, selling my 77 360LA engine, pulling engine out by the end of the next month and definitely needs a new home. Engine is fully rebuilt with less than 4k miles since rebuilt, rebuilt the engine myself with machine work done by Midway engine builders in Salinas Ca. Engine comes...

Selling 2015 5.7 hemi parts that came off a wrecked challenger. Bought the engine for a Gen III hemi swap. Got extra parts I don’t need. Valve covers, intake manifold, and flexplate. Asking 150 local pick up only, located in Hollister Ca 95023 unless you’re willing to pay for shipping.

Hey guys selling a GEN III Hemi BBK 1792 cable throttle body, was gonna use for my hemi swap POWERWAGON but decided to go with Holley snipper set up. Still in box and unused. Asking 300 shipped.

Hey guys, got a 360 with edelbrock heads RPM heads. I’m using 273 adjustable rockers for my solid cam/lifters. I’ve notice on my rockers I have quiet a bit of free play between my rockers arms and rocker shaft hold downs. I did use the hold downs to my non adjustable rocker shaft (all of them,)...

Hey guys, selling a 360 LA block, I believe it’s a 85 block. will confirm with pics. It’s a standard bore 360, with crankshaft, main caps, timing cover, truck oil pan, and pick up tube. Located in Hollister Ca. Local pick only. Asking 100.

Hey guys, selling some stuff that I have gathered up. They’re small block LA crap that I don’t need and they need a good home. B&M Flex plate 10236 (360 to 727), black aluminum valve covers with breathers, custom Manton pushrods ball/ cup 7 1/16” from bottom of cup to bottom of ball, and lastly...

Hey guys and gals. Got a question on 360 LA oiling/priming. I know on Mopar SB as you turn the crank, the oiling sequence alternates at the heads, is there a position at the crank/cam that both heads get oiled? I can’t find the sweet spot where oil gets diverted to both heads. Or is it foo error?

Hey guys, selling a NV4500 short tail shaft (GM) and 5.2/5.9 bellhousing. Transmission came off a running truck. Asking 700 for everything. Located in Hollister Ca.

Hey gang. I’m in the works of swapping out my NP435 to a 46rh on my 360la Powerwagon. Any one have any idea on what flexplate I can use? I know the 360 magnum and LA are balanced differently. Just not to sure on what flexplate I can use. 46rh has a torque converter from a 5.2 magnum. Will a B&M...

Hey guys selling a set of mopar valve covers and hardware. They are in real good shape with minor paint chips. Very good overall condition. Asking 90 shipped.

With all this Covid BS, how are you guys holding up? With all this California excessive overbearing restrictions, I guess it was kinda of a blessing for me. After 14 years of being absent from the pencils, I was able to get back in the saddle and introduce my kids into art. Can’t believe I was...

Hey guys I know the 5.9 magnum flywheel and LA are balanced differently. But my question is this... what will it take to convert a 5.9 magnum flywheel or magnum flex plate to an LA crank? Will it even mate onto the surface? I’d like to go nv4500 or 46rh on my 360LA Powerwagon with NP435 and...

Hey guys, I am looking for a gas 5.2 5.9 magnum NV4500 bellhousing. This is for a 360LA and future 5.7 gen III Hemi. I am in Hollister Ca.

Hey guys selling a new compcams 3203 Timing chain, 2.5 header collectors, and SB throttle bracket and return spring. Asking 60 shipped for all.

hey guys I’m tempted on buying a stainless bolt kit, for SB. But my concern is, doesn’t stainless steel seize up within time?

Selling my small block 360 alternator and power steering alternator brackets. Also comes with crank and water pump pulleys. Asking 80 shipped.

Selling my slant 6 power steering set up. Comes with pump, brackets, and crank pulley. Asking 120 shipped.

Selling my blue Holley electric fuel pump, Holley 12-880 fuel pressure regulator (boost referenced) and 100 micron fuel filter. 200 shipped.

Selling my Dutra Dual exhaust, they’re the Aussie manufactured exhaust manifold. In really good shape. Asking 500 shipped. They will also come with the exhaust flanges.

Hello again, selling my Clifford intake manifold with Aussie plenum (bottom) and Clifford 2 barrel adapter. It’s in great condition with no breaks or cracks. Asking 260 shipped.

Hey guys selling my boost/vacuum, electric fuel pressure, wideband gauges. Comes with all wiring, and also comes with all necessary wiring cables, and 02 sensors. Comes with 2 extra 02 sensors. They all work great. Asking 300 shipped.